Hi, hope someone could help me here:
Our root account was disabled on our production server this morning and usually we would login at the console to re-enable the account. However we are unable to get a login prompt at the console. The console displays the 8 options along the bottom and a... (2 Replies)
Hi friend,
I'm facing a problem to access the console and telnet to the HP ux 11 server due to the system file is full. How to access this server via single mode and how to mount the folder / and folder /var?
thanks.
vestro (1 Reply)
Hi :
I have a e450 sun server that I just started up and I connect my laptop to the serial connection using a null modem cable and it just does not connect.
I use hyperterminal, I dont connect a keyboard to the sun machine?
Any ideas?
Thanks a lot
Al (3 Replies)
hi all,
unable to load console info in SUNMC 4.0
in alarm it is giving error info i.e..Agent on host (.....),1161 port not responding.
plz try to solve the problem
Regards
spandhan (5 Replies)
Hi all,
unable to load console info in SUNMC 4.0
in alarm it is giving error info i.e..Agent on host (.....),1161 port not responding.
Iam using M9000 server solaris 10
plz try to solve the problem
Regards
spandhan (0 Replies)
Hi Guys,
I am working on the e25k server.
There is 4 domain configured
Once domain is down
So I tried to access the console for the problem domain.
using console -d B
but its showing following error message.
bash-2.05$ console -d B
Domain administration permissions... (3 Replies)
Hi,
I am trying to open a console window through the HMC. When I choose to do this the toolbar at the top left of the HMC screen show 'Open Terminal Window'. However when I click on it I am getting the error -
"The tsak you want to switch to is an applet based task, which dowes not support... (1 Reply)
I have recently aquired the following machine:
IBM,9113-550
Up until yesterday we could connect a dumb terminal to serial port 1 and get console login. However the dumb terminal died. We are now using a laptop with a null modem cable attached to serial port 1. This works perfectly for all of... (1 Reply)
tldr; We've installed a non-global-zone from a unified archive which once booted, we're unable to gain access to the system either through zlogin or zlogin -C.
Errors;
svc.startd: instance svc:/system/console-login:default exited with status 127
Investigation;
1) Already opened a SR with... (1 Reply)
Discussion started by: samthewildone
1 Replies
LEARN ABOUT SUNOS
console
console(7D) Devices console(7D)NAME
console - STREAMS-based console interface
SYNOPSIS
/dev/console
DESCRIPTION
The file /dev/console refers to the system console device. /dev/console should be used for interactive purposes only. Use of /dev/console
for logging purposes is discouraged; syslog(3C) or msglog(7D) should be used instead.
The identity of this device depends on the EEPROM or NVRAM settings in effect at the most recent system reboot; by default, it is the
``workstation console'' device consisting of the workstation keyboard and frame buffer acting in concert to emulate an ASCII terminal (see
wscons(7D)).
Regardless of the system configuration, the console device provides asynchronous serial driver semantics so that, in conjunction with the
STREAMS line discipline module ldterm(7M), it supports the termio(7I) terminal interface.
SEE ALSO syslog(3C), termios(3C), ldterm(7M), termio(7I), msglog(7D), wscons(7D)NOTES
In contrast to pre-SunOS 5.0 releases, it is no longer possible to redirect I/O intended for /dev/console to some other device. Instead,
redirection now applies to the workstation console device using a revised programming interface (see wscons(7D)). Since the system console
is normally configured to be the work station console, the overall effect is largely unchanged from previous releases.
See wscons(7D) for detailed descriptions of control sequence syntax, ANSI control functions, control character functions and escape
sequence functions.
SunOS 5.10 23 Apr 1999 console(7D)