When trying to connect to console, I am getting the below error.
Code:
plathwsvcd: Another instance is running.
plathwsvcd: Another instance is running.
plathwsvcd: Another instance is running.
plathwsvcd: Another instance is running.
INIT: Id "plhw" respawning too fast: disabled for 5 minutes
It just keeps coming.
I tried searching in inittab for any misconfiguration, but there is no entry in /etc/inittab for plhw.
Can some-one please help. Thanks in advance.
Last edited by Corona688; 05-02-2012 at 04:34 PM..
Hi, hope someone could help me here:
Our root account was disabled on our production server this morning and usually we would login at the console to re-enable the account. However we are unable to get a login prompt at the console. The console displays the 8 options along the bottom and a... (2 Replies)
Hi friend,
I'm facing a problem to access the console and telnet to the HP ux 11 server due to the system file is full. How to access this server via single mode and how to mount the folder / and folder /var?
thanks.
vestro (1 Reply)
Hi :
I have a e450 sun server that I just started up and I connect my laptop to the serial connection using a null modem cable and it just does not connect.
I use hyperterminal, I dont connect a keyboard to the sun machine?
Any ideas?
Thanks a lot
Al (3 Replies)
hi all,
unable to load console info in SUNMC 4.0
in alarm it is giving error info i.e..Agent on host (.....),1161 port not responding.
plz try to solve the problem
Regards
spandhan (5 Replies)
Hi all,
unable to load console info in SUNMC 4.0
in alarm it is giving error info i.e..Agent on host (.....),1161 port not responding.
Iam using M9000 server solaris 10
plz try to solve the problem
Regards
spandhan (0 Replies)
Hi Guys,
I am working on the e25k server.
There is 4 domain configured
Once domain is down
So I tried to access the console for the problem domain.
using console -d B
but its showing following error message.
bash-2.05$ console -d B
Domain administration permissions... (3 Replies)
Hi,
I am trying to open a console window through the HMC. When I choose to do this the toolbar at the top left of the HMC screen show 'Open Terminal Window'. However when I click on it I am getting the error -
"The tsak you want to switch to is an applet based task, which dowes not support... (1 Reply)
I have recently aquired the following machine:
IBM,9113-550
Up until yesterday we could connect a dumb terminal to serial port 1 and get console login. However the dumb terminal died. We are now using a laptop with a null modem cable attached to serial port 1. This works perfectly for all of... (1 Reply)
tldr; We've installed a non-global-zone from a unified archive which once booted, we're unable to gain access to the system either through zlogin or zlogin -C.
Errors;
svc.startd: instance svc:/system/console-login:default exited with status 127
Investigation;
1) Already opened a SR with... (1 Reply)
Discussion started by: samthewildone
1 Replies
LEARN ABOUT FREEBSD
conscontrol
CONSCONTROL(8) BSD System Manager's Manual CONSCONTROL(8)NAME
conscontrol -- control physical console devices
SYNOPSIS
conscontrol [list]
conscontrol mute on | off
conscontrol add | delete console
conscontrol set | unset console
DESCRIPTION
The conscontrol utility is used to examine and modify the physical devices which back the virtual console devices. If no arguments (or only
the list command) are specified, the current console settings are shown.
There are two types of logical consoles; a high level console which is represented by /dev/console, and a low level console. The low level
console is used for kernel printf(9) and ddb(4) debugger support, while the high level console is used by user programs like syslogd(8).
Multiple device support is implemented only for the low level console; the high level console is set to the first device in the console list.
Multiple console support may be invoked by passing the kernel the -D flag from the boot loader, or by using conscontrol to change the list of
console devices after the system has booted.
The following options are available:
add | delete console
Add or delete a physical device from the logical console. The device must support low-level console operations. Adding a device
will place it at the front of the list of console devices; the first device is used for the high level console.
The console argument is the name of a console device in /dev; the name of the directory may be omitted.
mute on | off
Change the state of console muting. All console output is suppressed when console muting is on.
set | unset console
Set or unset the virtual console. When unset, output from the system, such as the kernel printf(9), always goes out to the real main
console. When set, it goes to another. This is an interface to the tty ioctl TIOCCONS.
SEE ALSO sio(4), syscons(4), tty(4), vt(4), boot(8), loader(8)HISTORY
The conscontrol utility first appeared in FreeBSD 5.0.
AUTHORS
Jonathan Lemon
BSD April 14, 2011 BSD
05-02-2012
