(Disclaimer: I put this in the "dummies" section because I am a UNIX noob and I'm not really sure what I'm doing so I felt like it belonged here. If it belongs in the Solaris section I can delete this and post it there)
I was handed over an Oracle SPARC T3-1 machine at work, with 8 physical disks installed. I installed Solaris 11 on one of the disks, but when I boot the OS up, only two disks appear:
I don't think there is a RAID configuration set up on this machine (is this the proper way to check?):
I looked these commands up online (select scsi0, show-volumes) so I'm not sure if this is the correct way to check for RAID configuration. However, the results do look different from our other T3-1 machine, which shows all 8 disks properly:
I'm not very familiar with the OK prompt, sorry if this is an obvious question. I also have the output of "show-disks" and "devalias" from both systems, if that helps.
Any ideas why my disks aren't all showing up in Solaris?
Hi,
Does anyone know where i can find information on openboot prompt. My machine boot up with the number 1 ok. What does that mean? Any kind of help will be nice. Thanks in advance (4 Replies)
hi all, i was wondering if i have some volume manager and i want to format all partitions/disks and re-create new slices can i use regular format command or what?
i think veritas volume manager is already installed. (2 Replies)
Have a compaq dl380 proliant installed with solaris..
It has a smart array 5i controller.. currently I have 2 18gb disks - mirrored as far as I can see...
I have just put in 2 36gb disks (just physically put in)
How do I get solaris to recognise them so I can use them?
format command - only... (2 Replies)
I need to insert a new hard disk into a Sun Fire v210 machine. The (only) internal disk which is already in the machine is part number XRA-SC1CB-73G10K (DISK DRIVE ASSY. 73GB, 10K RPM, with SPUD BRACKET).
I also have nearly endless access to IBM hard disks at extremely low prices and would there... (2 Replies)
Hi All,
How can I go to OBP on Solaris 10-intel? I tried doing ctrl+c or ctrl+break, it won't go to the "ok" prompt.
Thanks in advance,
itik (6 Replies)
Friends,
i have used the following code to get the number of disks in solaris
echo | pfexec format | egrep -v "Searching|AVAILABLE|Specify|^$|@" | wc -l
is there a better way to get the same result (5 Replies)
hi frineds
in sunfire 6800 server for one domain when ever i am giving ifconfig -a interface names like hme0,hme1.......are not showing.Actually in the server hme0,hme1,qfe are showing .when i was tried with the cat /etc/path_to_intstshowing tphysical interfcace names .
after giving the... (2 Replies)
Hi Guy's
can anyone advise me ..
I have mapped some of EMC devices from EMC Storage to Sun Solaris server and I want to list all the disk which are assigned from the storage
can anyone advise me with the command how to can I list all the disk in Solaris
Thanks .. (2 Replies)
I have an Oracle VM set up with 1 virtual disk. I am trying to add 2 new disks to it. I was able to successfully add 1 (it appears when I run "format" in the VM) but when I add the second and third disks they do not appear in my VM.
Here are the commands I ran:
ldm add-vdsdev... (3 Replies)