My goal is to use FTP to transfer file between PC and SCO Unix server.When I try to connect via FTP with root user, it failed.
What should I do? How to configure ftpaccess?
Thanks in advance! (2 Replies)
hi ,
i have jsut installed linux 9.0 , but i can not ftp or telnet to the system .
i have installed the ftp and the telnet server during installation .
i have also configured the files to enable the ftp and telnet , the ftp and the telnet daemons are running , but when i do ftp :
ftp... (1 Reply)
Hi,
I have turn off the FTP service and rebooted the server .
(edit /etc/inetd.conf and /etc/inet/services)
Now , how can I enable back the FTP without rebooting the server .
Thanks (1 Reply)
Hi,
I have PC with Linux OS RHEL3 and USB port is disabled from BIOS. BIOS access is protected using password. But, I have root access. Now, how can I enable USB port using root access? Is there any trick that I can do using root access that can enable USB port once my PC has booted up? (3 Replies)
Hi,
i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port.
---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ----------
please help :( (7 Replies)
I am not able to get ftp working for Solaris 10 for root user. I am getting login failed error.
331 Password required for root.
Password:
530 Login incorrect.
Login failed.
Tried following things already.
1. SFTP works ok, still would like to know why FTP is not working (curious).
2.... (5 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Hi,
I am transferring my report files to another FTP server which the end users are downloading later. But while accessing the FTP server its asking for username and password which i don't want to share to the end users rather i want to make the login as anonymous so that it... (3 Replies)
Discussion started by: Showdown
3 Replies
LEARN ABOUT OSF1
iptos
iptos(4) Kernel Interfaces Manual iptos(4)NAME
iptos - Defines the IP Type Of Service (TOS) for FTP and Telnet
SYNOPSIS
/etc/iptos
DESCRIPTION
The /etc/iptos file configures the Type Of Service (TOS) of the Internet Protocol (IP) used by FTP and Telnet.
The TOS field in the Internet datagram is to specify how the datagram should be handled. It is a mechanism to allow control information to
have precedence over data.
Generally, protocols that are involved in direct interaction with a human should select low delay, while data transfers that involve large
blocks of data need high throughput. Finally, high reliability is most important for datagram-based Internet management functions.
In the Tru64 UNIX operating system, the ftp and telnet applications and the ftpd and telnetd daemons allow the configuring of TOS values.
These applications check to see if the /etc/iptos file exists; if the file exists, the applications obtain the TOS value from the file and
use that value to set the TOS field. If the /etc/iptos file does not exist, the applications default to the following TOS values recom-
mended by RFC1060: Low delay High throughput Low delay
Users who want to configure their own TOS values for the TOS field should provide the /etc/iptos file.
Note
Most IP routers do not differentiate based on TOS, and therefore providing values other than the default would have no affect. You
should not change the default values for FTP and Telnet.
Each entry should consist of a single line of the form:
Application Proto TOS-bits aliases
The entry fields contain the following information: The name of an application TOS entry. The protocol name for which the entry is appro-
priate. The TOS value to be set for the entry. A list of aliases that exist for the entry.
Items on an entry line are separated by any number of blanks, tabs, or combination of blanks and tabs. A number sign (#) indicates that
the rest of the line is a comment and is not interpreted by routines that search the file. Blank lines in the file are ignored.
Valid TOS entry names are ftp-control and ftp-data for FTP and telnet for Telnet.
The TOS value for the entry should be one of the following hexadecimal numbers, corresponding to TOS bits: Low delay High throughput High
reliability
If you need to disable the use of TOS bits, because you are having troubling communicating with a TCP/IP host that doe not conform entirely
with the IP specification, you can disable the TOS bits by using the the following settings in the /etc/iptos file:
# # Format of this file: # Application Proto TOS-bits aliases #
ftp-control tcp 0x0 ftp-data tcp 0x0 telnet tcp 0x0
EXAMPLES
The following example shows typical entries in the /etc/iptos file:
# # Format of this file: # Application Proto TOS-bits aliases #
ftp-control tcp 0x10 ftp-data tcp 0x08 telnet tcp 0x10
RELATED INFORMATION
RFC1060, ftp(1), telnet(1), ftpd(8), telnetd(8) delim off
iptos(4)