I'm trying to use the "mknod" call in C to create a clone of /dev/null. I am stumped as to the final parameter I should provide to "mknod()". I am supposed to give it a type dev_t, which specifies a major & minor number. I want to specify major 3, minor 1, but how can I do this?
dev_t seems to... (2 Replies)
Disk cloning
I had an external SCSI master disk that I used to clone to an identical external SCSI disk because the other SCSI disk would become corrupted. My original Master became corrupted so I used one of the other to good disk to copy back to the master. Unfortunately the new master needs... (1 Reply)
I have a Sun T5120, and I want to programmatically determine how much RAM it has.
# uname -a
SunOS myhost 5.10 Generic_141444-09 sun4v sparc SUNW,SPARC-Enterprise-T5120
The box has 64Gb; I tried prtdiag and prtconf, but they give me bogus info
prtconf gives me:
# prtconf |grep -i... (12 Replies)
Trying to clone an old V240 (sun4u) onto a new T2000 (sun4v).
Managed to create a flar on the V240. Worked out that you need to add the sun4v architecture to the flar (-U "content_architecture=sun4u,sun4v" in the flarcreate).
Anyway, copied that to spare 2nd disk on my target T2000. Booted... (2 Replies)
have been trying to create a 2 GB ramdisk (virtual) to run on my T-2000 simulator (Legion) which has sun4v architecture. I have a SPARC workstation which runs on sun4u architecture with Solaris 10.
I have created a ramdisk image using dd command, newfs, then used ufsrestore to restore the... (3 Replies)
Hi!
I am quite new to Solaris and come from AIX world.
I need to clone running production LDOM. In AIX you just take mksysb and restore it to new LPAR. It will install with blank network settings.
How to do it in Solaris 11? Can't find document to clone from running system.. they talk only... (6 Replies)
Hi everyone,
We have the below sun Operating system, Now our storage team have Create a 500GB LUN for this server, How can i scan and mount the shared LUN ? Could anyone help me to resolve this issue.
SunOS my_hostname.com 5.10 Generic_150400-09 sun4v sparc sun4v
Update:
--------
I... (9 Replies)
Hi experts,
This is a production server.
Host information's are below
SunOS hostname_srv 5.10 Generic_150400-09 sun4v sparc sun4v
Now issue with ntp service, This host have zone in it with 9 hosts, Every hosts have ntp service issue. While i check for the service status it's in... (3 Replies)
Hi
I have the following difficulty:
the NetApp admin has clone one file system from one red hatserver and presented this cloned LUN into another redhat server.
I can see the LUN as:
fdisk -l
Disk /dev/sda: 64.4 GB, 64424509440 bytes
255 heads, 63 sectors/track, 7832 cylinders
Units =... (1 Reply)
Discussion started by: fretagi
1 Replies
LEARN ABOUT DEBIAN
zip_add
ZIP_ADD(3) Library Functions Manual ZIP_ADD(3)NAME
zip_add , - .Nm zip_replace add file to zip archive or replace file in zip archive
LIBRARY
libzip (-lzip)
SYNOPSIS
#include <zip.h>
zip_int64_t zip_add(struct zip *archive, const char *name); "struct zip_source *source"
int zip_replace(struct zip *archive, zip_uint64_t index); "struct zip_source *source"
DESCRIPTION
The function zip_add adds a file to a zip archive, while zip_replace replaces an existing file in a zip archive. The argument archive
specifies the zip archive to which the file should be added. name is the file's name in the zip archive (for zip_add ), while index speci-
fies which file should be replaced (for zip_replace ). The data is obtained from the source argument. See the zip_source_* functions
cited in SEE ALSO.
RETURN VALUES
Upon successful completion, zip_add returns the index of the new file in the archive, and zip_replace returns 0. Otherwise, -1 is returned
and the error code in archive is set to indicate the error.
EXAMPLES
struct zip_source *s;
if ((s=zip_source_buffer(archive, buffer, len)) == NULL ||
zip_add(archive, name, s) 0) {
zip_source_free(s);
printf("error adding file: %s0, zip_strerror(archive)); }
ERRORS
zip_add and zip_replace fail if:
[ZIP_ER_EXISTS]
There is already a file called name in the archive. (Only applies to zip_add ).
[ZIP_ER_INVAL]
source or name are NULL, or index is invalid.
[ZIP_ER_MEMORY]
Required memory could not be allocated.
SEE ALSO libzip(3), zip_source_file(3), zip_source_filep(3), zip_source_function(3), zip_source_zip(3)AUTHORS
Dieter Baron <dillo@giga.or.at> and Thomas Klausner <tk@giga.or.at>
NiH March 10, 2009 ZIP_ADD(3)