Sun X4270 ILOM Login issue Post: 302622745

8 More Discussions You Might Find Interesting

1. Solaris

Problem using default account with ILOM on Sun SPARC Enterprise T5140

Hi, I have Sun SPARC Enterprise T5140 and I can't access it via serial port using preconfigured administrator account, as described in Sun Integrated Lights Out Manager 2.0 User's Guide: I'm always receive "Login incorrect" message. I'm really confused! Does anyone experience such circumstances?...

2. Solaris

PAM login library files corrupted, have ILOM, can I get root?

I was installing sfw sudo and its dependencies (libiconv, libintl, libgcc)on Solaris 10, running on an x86 x4200 and I corrupted some PAM library files. It's a standard Solaris 10 base install, with some added software & libraries from a vendor. I am on console trying to get root access back,...

3. Solaris

x4600 iLOM issue

I need to configure the iLOM for x4600 server. before I can set the IP details and commit, I need to set network state should be enabled. However my firmware is already the latest and I need not upgrade. I am not able to set the /SP/network state to enable. pls assist. i BELIEVE the bug was fixed...

4. Solaris

ILOM Banner Sun x41XX servers

Is it possible to set the information that shows in the cli banner when you login to the ILOM? In addition, after I set the hostname of the ILOM, how do I check it?

5. Solaris

Sun X4540 Ilom - Solaris 10

Hello Admins, I am trying to access the solaris 10 host using the ilo. When I do start /SP/console, it just hangs, it doesn't give me any login prompt... I tried reset /SYS and also did reset /SP...but no luck... We have Sun X4540.... Any help appreciated..Thanks

6. Solaris

SUN ILOM

Hi, I am just confused with iLOM. Is iLOM is applicable for SPARC as well as X86 servers?? which are having CMM. Hope ALOM will be applicable for rest of the servers like v240 kind of series. Can any one pls clarify this?? Thanks in Advance Vaisakh K S

7. Solaris

ILOM Sunservice login incorrect

We have tried to perform the data collection of 11 SUN FIRE X4170 SERVER as part of preventive maintenance activity. But, when we tried to access the ILOM using sunservice user we got a “login incorrect” prompt. We used the “changeme” password. can we use the root/changeme account instead...

8. Solaris

How to start up console on Sun Fire X2200 ILOM using SSH?

Hi Oracle Hardware Specialists, I have shutdown a Sun Fire X2200 server running Solaris 10 x86 to single user mode to experiment some backup commands using Web based Sun embedded Lights Out Manager Redirection to open up a console session. However, it is not possible to copy & past text with...

LEARN ABOUT V7

liebert

LIEBERT(8)							    NUT Manual								LIEBERT(8)

NAME

       liebert - Driver for Liebert contact-closure UPS equipment

NOTE

       This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

       This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their
       contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver.

EXTRA ARGUMENTS

       This driver does not support any extra settings in the ups.conf(5).

BUGS

       This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable.
       You may have to build another cable with DTR connected through to the UPS for it to work.

       There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a
       fundamental limitation of any contact-closure driver.

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

Network UPS Tools						    05/21/2012								LIEBERT(8)