First a little background: I'm working with an AIX 6.1 TL05 running two mirrored SAS disks (rootvg) and four SSDs (appvg)
All four SSDs belong to appvg and are setup to mirror as follows:
hdisk4 --> hdisk6 (containing application fs)
hdisk5 --> hdisk7 (containing database fs)
A few days ago hdisk5 went kaput. In preparation for replacing that one SSD, I did the followling:
After the disk was replaced, the system found the new disk and allocated as pdisk1/hdisk5. I then did the following:
Once the mirroring was done, I was back to my original set up. The question is, was this by design or was I just lucky? Could I have ended up with:
hdisk4 --> hdisk6 --> hdisk5
hdisk7
...or is Volume Manager smart enough to notice that the lvs on hdisk7 only had one copy and should thus be mirrored to the new hdisk5?
Hello,
I am trying to do mirror in solaris 9. I have total 0-7 disks
4 5 6 7
0 1 2 3
Drive 0 and Drive 4 = Boot Drives
Need to Mirror following drives.
Drive 1 and Drive 5 = Need to mirror
Drive 1 was mounted on: /prod1, /prod2, /prod3, /prod4, /prod5.
Then i... (3 Replies)
System: Alpha with Tru64 5.1b
Disk under LSM (Logical Storage Manager; essentially v2 of Veritas VxVM) control was generating disk errors. The disk was timing out a lot and generating a few disk errors. DBAs couldn't keep the oracle instance up on that node of the cluster. I contacted HP and got... (1 Reply)
Hello friends,
I need to test some of the solaris 10 concepts and veritas volume manager.i want to know ,where i get the testing labs or E-labs(online) for this practice.i ready to pay for this labs.pls kindly help me to get the details or website names...Thanks in Advance
-Jay (6 Replies)
I am trying to build a veritas volume similar to an existing volume on another server. The output on source server is:
usbtor12# vxprint -hrtg appdg
v anvil_sqlVOL - ENABLED ACTIVE 629145600 SELECT - fsgen
pl anvil_sqlVOL-01 anvil_sqlVOL ENABLED ACTIVE 629145600... (3 Replies)
Hello there,
I'm going to describe a situation I've got here... feel free to ask away questions and I'll provide what I can if it'll help me get this answered!
When I do a vxdisk list, I see a disk that VxVM calls "disk4" that is listed as "failed was: c1t9d0s2". When I do a format, I can go... (3 Replies)
I have a machine (5.10 Generic_142900-03 sun4u sparc SUNW,Sun-Fire-V210) that we are upgrading the storage and my task is to mirror what is already on the machine to the new disk. I have the disk, it is labeled and ready but I am not sure of the next steps to mirror the existing diskgroup and... (1 Reply)
Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment.
Let me know if you need any deatils on this.
Thanks,
Rama (1 Reply)
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /
... (0 Replies)
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /... (4 Replies)
Hi Experts,
I wanted to extend a veritas file system which is running on veritas cluster and mounted on node2 system.
#hastatus -sum
-- System State Frozen
A node1 running 0
A node2 running 0
-- Group State
-- Group System Probed ... (1 Reply)
Discussion started by: Skmanojkum
1 Replies
LEARN ABOUT OSX
locale::codes::langfam
Locale::Codes::LangFam(3pm) Perl Programmers Reference Guide Locale::Codes::LangFam(3pm)NAME
Locale::Codes::LangFam - standard codes for language extension identification
SYNOPSIS
use Locale::Codes::LangFam;
$lext = code2langfam('apa'); # $lext gets 'Apache languages'
$code = langfam2code('Apache languages'); # $code gets 'apa'
@codes = all_langfam_codes();
@names = all_langfam_names();
DESCRIPTION
The "Locale::Codes::LangFam" module provides access to standard codes used for identifying language families, such as those as defined in
ISO 639-5.
Most of the routines take an optional additional argument which specifies the code set to use. If not specified, the default ISO 639-5
language family codes will be used.
SUPPORTED CODE SETS
There are several different code sets you can use for identifying language families. A code set may be specified using either a name, or a
constant that is automatically exported by this module.
For example, the two are equivalent:
$lext = code2langfam('apa','alpha');
$lext = code2langfam('apa',LOCALE_LANGFAM_ALPHA);
The codesets currently supported are:
alpha
This is the set of three-letter (lowercase) codes from ISO 639-5 such as 'apa' for Apache languages.
This is the default code set.
ROUTINES
code2langfam ( CODE [,CODESET] )
langfam2code ( NAME [,CODESET] )
langfam_code2code ( CODE ,CODESET ,CODESET2 )
all_langfam_codes ( [CODESET] )
all_langfam_names ( [CODESET] )
Locale::Codes::LangFam::rename_langfam ( CODE ,NEW_NAME [,CODESET] )
Locale::Codes::LangFam::add_langfam ( CODE ,NAME [,CODESET] )
Locale::Codes::LangFam::delete_langfam ( CODE [,CODESET] )
Locale::Codes::LangFam::add_langfam_alias ( NAME ,NEW_NAME )
Locale::Codes::LangFam::delete_langfam_alias ( NAME )
Locale::Codes::LangFam::rename_langfam_code ( CODE ,NEW_CODE [,CODESET] )
Locale::Codes::LangFam::add_langfam_code_alias ( CODE ,NEW_CODE [,CODESET] )
Locale::Codes::LangFam::delete_langfam_code_alias ( CODE [,CODESET] )
These routines are all documented in the Locale::Codes::API man page.
SEE ALSO
Locale::Codes
The Locale-Codes distribution.
Locale::Codes::API
The list of functions supported by this module.
http://www.loc.gov/standards/iso639-5/id.php
ISO 639-5 .
AUTHOR
See Locale::Codes for full author history.
Currently maintained by Sullivan Beck (sbeck@cpan.org).
COPYRIGHT
Copyright (c) 2011-2012 Sullivan Beck
This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
perl v5.16.2 2012-10-11 Locale::Codes::LangFam(3pm)