First a little background: I'm working with an AIX 6.1 TL05 running two mirrored SAS disks (rootvg) and four SSDs (appvg)
All four SSDs belong to appvg and are setup to mirror as follows:
hdisk4 --> hdisk6 (containing application fs)
hdisk5 --> hdisk7 (containing database fs)
A few days ago hdisk5 went kaput. In preparation for replacing that one SSD, I did the followling:
Code:
unmirrorvg appvg hdisk5
reducevg appvg hdisk5
rmdev -dl hdisk5
rmdev -dl pdisk1 (the pdisk being what hdisk5 was mapped to; I checked)
After the disk was replaced, the system found the new disk and allocated as pdisk1/hdisk5. I then did the following:
Code:
extendvg appvg hdisk5
mirrorvg appvg hdisk5
Once the mirroring was done, I was back to my original set up. The question is, was this by design or was I just lucky? Could I have ended up with:
hdisk4 --> hdisk6 --> hdisk5
hdisk7
...or is Volume Manager smart enough to notice that the lvs on hdisk7 only had one copy and should thus be mirrored to the new hdisk5?
Hello,
I am trying to do mirror in solaris 9. I have total 0-7 disks
4 5 6 7
0 1 2 3
Drive 0 and Drive 4 = Boot Drives
Need to Mirror following drives.
Drive 1 and Drive 5 = Need to mirror
Drive 1 was mounted on: /prod1, /prod2, /prod3, /prod4, /prod5.
Then i... (3 Replies)
System: Alpha with Tru64 5.1b
Disk under LSM (Logical Storage Manager; essentially v2 of Veritas VxVM) control was generating disk errors. The disk was timing out a lot and generating a few disk errors. DBAs couldn't keep the oracle instance up on that node of the cluster. I contacted HP and got... (1 Reply)
Hello friends,
I need to test some of the solaris 10 concepts and veritas volume manager.i want to know ,where i get the testing labs or E-labs(online) for this practice.i ready to pay for this labs.pls kindly help me to get the details or website names...Thanks in Advance
-Jay (6 Replies)
I am trying to build a veritas volume similar to an existing volume on another server. The output on source server is:
usbtor12# vxprint -hrtg appdg
v anvil_sqlVOL - ENABLED ACTIVE 629145600 SELECT - fsgen
pl anvil_sqlVOL-01 anvil_sqlVOL ENABLED ACTIVE 629145600... (3 Replies)
Hello there,
I'm going to describe a situation I've got here... feel free to ask away questions and I'll provide what I can if it'll help me get this answered!
When I do a vxdisk list, I see a disk that VxVM calls "disk4" that is listed as "failed was: c1t9d0s2". When I do a format, I can go... (3 Replies)
I have a machine (5.10 Generic_142900-03 sun4u sparc SUNW,Sun-Fire-V210) that we are upgrading the storage and my task is to mirror what is already on the machine to the new disk. I have the disk, it is labeled and ready but I am not sure of the next steps to mirror the existing diskgroup and... (1 Reply)
Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment.
Let me know if you need any deatils on this.
Thanks,
Rama (1 Reply)
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /
... (0 Replies)
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /... (4 Replies)
Hi Experts,
I wanted to extend a veritas file system which is running on veritas cluster and mounted on node2 system.
#hastatus -sum
-- System State Frozen
A node1 running 0
A node2 running 0
-- Group State
-- Group System Probed ... (1 Reply)
Discussion started by: Skmanojkum
1 Replies
LEARN ABOUT OSF1
volrootmir
volrootmir(8) System Manager's Manual volrootmir(8)NAME
volrootmir - Mirror areas necessary for booting to a new disk
SYNOPSIS
/usr/sbin/volrootmir [-a] [nconfig=count] target_disk [swap=target_partition]
OPTIONS
Specifies that all volumes on the system disk be mirrored, not just the root and swap volumes, rootvol and swapvol.
DESCRIPTION
The volrootmir script causes a mirror copy of areas of the root disk involved in booting to be made on the specified target disk.
When used without the -a option, volrootmir adds mirrors of the root and swap volumes and allocates them on the new disk. In addition, all
disk regions required for booting are set up and partitions for the new volume mirrors are created.
When used with the -a option, volrootmir mirrors all in-use partitions on the system disk.
To mirror a swap volume that is on a separate disk from the root volume, the swap attribute must be used to specify a separate target for
the swap mirror.
The target disk(s) must be at least as large as the sum of the sizes of rootvol and swapvol. Also, the physical disk should not have any
disk partition in use.
This script can be called from the voldiskadm menus by choosing the Mirror volumes on a disk operation.
ATTRIBUTES
Specifies the number of log copies and copies of the configuration database, for example, nconfig=2. Specifies that the swap volume,
swapvol, be mirrored on a separate disk, as specified by target_partition.
EXAMPLES
The following command mirrors the rootvol and swapvol volumes onto the target disk, dsk3. This command will fail if swapvol is on a differ-
ent disk from rootvol.
# volrootmir dsk3 The following command mirrors rootvol, swapvol, and any other volumes on the root disk onto the target disk, dsk3.
This command will fail if swapvol is on a different disk from rootvol.
# volrootmir -a dsk3 The following command mirrors rootvol on disk dsk3, swapvol onto partition dsk7d, and any other volumes on the
root disk onto disk dsk3. This command will fail if swapvol is on the same disk as rootvol.
# volrootmir -a dsk3 swap=dsk7d The following command mirrors rootvol onto disk dsk3 and swapvol onto partition dsk7d. This command
will fail if swapvol is on the same disk as rootvol.
# volrootmir dsk3 swap=dsk7d
SEE ALSO volintro(8), voldiskadm(8)volrootmir(8)
04-12-2012
