Problem with Solaris LUN and New FS Post: 302618751

10 More Discussions You Might Find Interesting

1. Solaris

Solaris 9 or 10 LUN Limitations

Is there a limit to the number of LUNS that can be concatenated using Solaris Volume manager with Soft partitions? I have worked with some AIX admins in the past and there was such a limitation therefore limiting the size the filesystem could grow to. Is there such a limitation in Solaris 9...

2. Solaris

problem with clearing a removed LUN from solaris

Hi I have a solaris 8 server that have LUN being removed from the server but it is still show up as error device in format command and in vxvm, i have already run devfsadm -C but it does not clear up the disk, is there other command to do this without reconfiguration boot? 34. c9t2d0...

3. Solaris

LUN allocation in solaris server

hi all can anyone tell me how to track a new attached LUN in a solaris server??

4. Solaris

Largest LUN size in Solaris 10

What is the largest possible LUN size that can be presented to Solaris 10. I've been googling a lot about this. The new EFI lablels (an alternative to VTOC) supports LUNs greater than 2TB. I need to know the upper limit. please help me find it.

5. Solaris

Set up iscsi LUN on solaris 9?

Hi, I need to set up iscsi LUN on Solaris 9. I've done it on Solaris 10 with iscsiadm. How do you do it on Solaris 9 though? Currently using Solaris 9 update 2. Your help is appreciated. Thanks, Sparcman

6. Solaris

new attached lun in solaris 10

hi, what are the steps to detect and configure a new attached lun in Solaris 10. Is there any difference between cfgadm and luxadm command ? rgds, snjksh

7. Solaris

Solaris/vxvm/EMC Lun configuration

Hello all, i try to allocate the same LUN to two server (or more in the future) i use solaris 10, vxvm (vxfs) for data and solaris zones and EMC DMX-4, i try to migrate solaris zones between servers in case of problem. and this is what i want to do - affect LUN to srv00124 and srv10155 -...

8. Solaris

How to get LUN WWN in Solaris?

How to get LUN WWN (i.e LUN mapped from a storage box say Symmetrix or clariion) in Solaris. fcinfo command does give the Target port wwn but what i'm looking for is the LUN WWN. Any help is appreciated.

9. Solaris

Solaris 10, adding new LUN from SAN storage

Hello to all, Actually, currently on my Solaris box, I've a LUN (5TB space) from a EMC storage which is working fine, and a partition with ZFS filesystem is created for that LUN. as further you'll see in the logs, the "c4t6006016053802E00E6A9196B6506E211d0s2" is the current configured LUN in the...

10. Solaris

LUn' unmapped from storage still showing on Solaris 10

How can i remove LUN's from solaris 10 those are unmapped from SAN? from storage side i got confirmation that they removed lun. but in my solaris box still it's visible. i tried below. root@globalares2.example.com #luxadm -e offline /dev/rdsk/c2t600D02310007D16C42FF09E24B5B8255d0s2...

LEARN ABOUT SUSE

sg_emc_trespass

SG_EMC_TRESPASS(8)						     SG3_UTILS							SG_EMC_TRESPASS(8)

NAME

       sg_emc_trespass - Changes ownership of a LUN from another Service-Processor to this one.

SYNOPSIS

       sg_emc_trespass [-d] [-hr] [-s] [-V] DEVICE

DESCRIPTION

       sg_emc_trespass	sends  an EMC-specific Trespass Command to the DEVICE with the selected options. This Mode Select changes the ownership of
       the LUN of the device from another Service-Processor to the one the command was received on.

OPTIONS

       Arguments to long options are mandatory for short options as well.

       -d     outputs some extra debug information associated with executing this command

       -hr    Sets the 'Honor Reservation' bit in the command. If set, the trespass will only succeed to change the ownership from the Peer SP	if
	      the Peer SP does not have an outstanding SCSI reservation for the LUN. By default, the reservation state will be ignored.

       -s     Send the short version of the trespass command instead of the long version. The short version is supported on the EMC FC5300, FC4500
	      and FC4700. The long version (default) is supported on the CLARiiON CX and AX family arrays.

       -V     print out version string then exit.

       In the 2.4 series of Linux kernels the DEVICE must be a SCSI generic (sg) device. In the 2.6 series block devices (e.g. SCSI disks and  DVD
       drives) can also be specified. For example "sg_start 0 /dev/sda" will work in the 2.6 series kernels.

EXIT STATUS

       The exit status of sg_emc_trespass is 0 when it is successful. Otherwise see the sg3_utils(8) man page.

AUTHOR

       Written by Lars Marowsky-Bree, based on sg_start.

REPORTING BUGS

       Report bugs to <dgilbert at interlog dot com>.

COPYRIGHT

       Copyright (C) 2004 Lars Marowsky-Bree, Douglas Gilbert.
       This  software  is distributed under the GPL version 2. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
       POSE.

sg3_utils-1.23							   January 2007 						SG_EMC_TRESPASS(8)

10 More Discussions You Might Find Interesting

1. Solaris

Solaris 9 or 10 LUN Limitations

Discussion started by: BG_JrAdmin

2. Solaris

problem with clearing a removed LUN from solaris

Discussion started by: robertngo

3. Solaris

LUN allocation in solaris server

Discussion started by: raynu.sharma

4. Solaris

Largest LUN size in Solaris 10

Discussion started by: pingmeback