I am confused when I am seeing the output of bdf command ioscan -fnC disk, there is no same files which i have seen in bdf output and ioscan output...One volume was mounted in one folder called /teldb and device file path was /dev/disk/disk48. The same i didnt found in ioscan disk output. How to identify which device file is belongs with disk48. For your reference I have attached output logs through putty...its urgent..
hi,
i have a volume on a LUN of an EMC-storage and i need to increase the
size.
i could increase the size of the LUN on the EMC, i could increase the
size of the disk for solaris, but how can i tell the veritas volume
manager that the disk is larger now?
what i've done:
1. LUN on EMC
2.... (3 Replies)
I just installed IBMsdd on Solaris diver along with the patches recommended. I also installed 2 - 2Gigs qlogic fiber cards & the corresponding pkges for the cards.
What command can I use to scan this LUN disks from my Soalris servers. Solaris doen't seem to be seeing this disks presented on it.... (2 Replies)
How we can know number of inode present in my Disk including free and occupied.
Is there any tool or program to know how much free inode are there in inode free list . (2 Replies)
Hello guys,
It would be so nice of you if someone can provide me with these informations.
1) My SAN group assigned 51G of LUN space to the VIO server.I ran cfgdev to discover the newly added LUN. Unfortunately most of the disks that are in VIO server is 51G. How would I know which is the newly... (3 Replies)
I have a list of LUN ID, my task is to find if disk has been added or not. How do I do that? I have been searching the forum and not able to find answer.
thanks (4 Replies)
Hi
Please let me know how to check disk model number.
I have already tried prtconf command but there is no such information related to model number.
Regards,
Scriptor (3 Replies)
Hello folks,
I have Hp.ux 11.31 and I need know how formating in OS new LUN disk attach to system
e.g. the wwid:
# scsimgr lun_map -D /dev/rdisk/disk4
LUN PATH INFORMATION FOR LUN : /dev/rdisk/disk4
Total number of LUN paths = 2
World Wide Identifier(WWID) =... (3 Replies)
Hi Everyone,
lscfg will get the disk information by reading the VPD of that particular hdisk
I have few doubts about how Aix works, please help me to get them clear
1) How can Aix gets the disk serial number after disk assign and cfgmgr
2) Newly added disk information was added to CuVPD... (2 Replies)
Discussion started by: Sachin1987
2 Replies
LEARN ABOUT HPUX
create_sysfile
create_sysfile(1M)create_sysfile(1M)NAME
create_sysfile - create a kernel system file
SYNOPSIS
[outfile]
DESCRIPTION
The command creates a kernel configuration description file (system file) which can be used as input to the commands kconfig(1M) or mk_ker-
nel(1M). The system file that is generated is of type version 1 (see system(4)) and is built according to the drivers required by the cur-
rent system hardware. This command is intended for use during the install process when the system does not have a system file.
The command uses the ioscan(1M) command to scan the system hardware and adds all drivers it can identify to run the existing hardware. If
outfile is specified, the resulting system file is sent to outfile. If outfile is not specified, the output is placed in the file
RETURN VALUE
Upon completion, returns with one of the following exit values:
0 Successful.
1 One or more errors were reported.
DIAGNOSTICS
Errors are sent to stderr. Most of the diagnostic messages from are self-explanatory. Errors cause to halt immediately.
WARNINGS
is obsolete and will be removed in a future version of HP-UX.
AUTHOR
was developed by HP.
SEE ALSO ioscan(1M), kconfig(1M), mk_kernel(1M), system(4), kconfig(5).
create_sysfile(1M)