what port number is used for SSH communication and HTTPS services Post: 302616807

8 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Serial port communication

We're running SCO Unix Openserver 5.05 and I'm having trouble with serial communication between the com2 serial port and a handheld device. Downloading data from Unix to the handheld works perfectly, but the other way around creates a major problem. I don't know whether it's a buffer overflow or...

2. AIX

how to check status of various services and port?

How can i check which service is activated on my AIX Box? how one can check particular port is open or not (like ftp/telnet port)? I dont have admin rights

3. Programming

problem while having a communication with serial port?????

hello, I am gettin problem while sending and recieving data through seial port... when I am sending Data then the reciever end is not able to recieve that data ..... Reciever end is running in infinite loop just polling after some time to check that there is data on the port and then again...

4. IP Networking

SSH Port Forwarding - sharing the same port

Hi Linux/Unix Guru, I am setting Linux Hopping Station to another different servers. My current config to connect to another servers is using different port to connect. e.g ssh -D 1080 -p 22 username@server1.com ssh -D 1081 -p 22 username@server2.com Now what I would like to have...

5. Red Hat

Restart of services if port no is changed in /etc/services in RHEL

I had a doubt if any services need to be restarted if port no in /etc/services in an RHEL setup is changed. For eg, the port no of 443 for SSL may need to be changed. I hope my query is clear whether any services need to be restarted if port no in /etc/services is changed. Please revert with...

6. Solaris

Need suggestion:- Failed HTTPS transfer to https://supportfiles.sun.com/curl

Hi Guys, I have recently started reciving below Error message Failed HTTPS transfer to https://supportfiles.sun.com/curl whenever I run /usr/local/bin/sudo /opt/SUNWexplo/bin/explorer -P -q -v from all Servers. Looks like the SSL certificate as Expired. Whenever I type...

7. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

8. SuSE

Fetch port services from LDAP server

Hi, We have a ldap server configured with services (port) and want to know how to fetch that to the ldap clients: # cat /etc/nsswitch.conf|grep -i services services: files sss (neither sss nor ldap works) by doing "#getent services" I am getting only the result from /etc/services but I...

LEARN ABOUT DEBIAN

gftp

GFTP(1) 						      General Commands Manual							   GFTP(1)

NAME

       gftp - file transfer client for *NIX based machines.

SYNOPSIS

       gftp [options] [[proto://][ user : [pass] @] server [: port ][/ directory ]]

DESCRIPTION

       gFTP  is  a file transfer client for *NIX based machines. It currently has a text interface and a GTK+ 1.2/2.x graphical interface. It cur-
       rently supports the FTP, FTPS (control connection only), HTTP, HTTPS, SSH and FSP protocols.

OPTIONS

       You may enter a url on the command line that gFTP will automatically connect to when it starts up.

       --help, -h
	      Display program usage.

       --info Display some information about how gFTP was built. Please send the output of this command when submitting a bug report.

       --version, -v
	      Display the current version of gFTP.

       proto  This specifies the protocol that should be used. It can currently be one of the following options: ftp, ftps, http, https, ssh, fsp,
	      local and bookmark. If omitted, the protocol specified by the default_protocol option will be used.

       user   The username that will be used to log into the remote server. If omitted, your current username will be used for most protocols. For
	      the FTP protocol, the anonymous username will be used.

       pass   The password that will be used to log into the remote server. If omitted, you will be prompted for the password. If  you	are  using
	      the FTP protocol, and the username is anonymous, then your email address will be used as the password.

       server The remote server to connect to.

       port   The  remote port on the server to connect to. If omitted, the default port for the protocol will be used. The port will be looked up
	      in the services(5) file.

       directory
	      The directory to change to once you are connected to the remote server.

FILES

       ~/.gftp/gftprc
	      Per user configuration file. Most of these options can be edited inside gFTP. This file is also commented very well.   ~/.gftp/book-
	      marks
		     Per user bookmarks file.

BUGS

       If you find any bugs in gFTP, please report them to GNOME's Bugzilla at http://bugzilla.gnome.org/

AUTHOR

       Brian Masney <masneyb@gftp.org> - http://www.gftp.org/

								    MARCH 2007								   GFTP(1)