Since the order is explicit in the synopsis, I suspect there must have been some historical implementations that were picky about the order. I don't recall coming across one, but since the error message explicitly says:
I am guessing this is what this particular implementation wants to see first..
This User Gave Thanks to Scrutinizer For This Post:
Is there any danger to keeping one of my disks at 100% capacity? (it's a disk just used for read-only files, not system files or anything like that).
It's HP-UX if that matters.
Thanks! (1 Reply)
Hi, Im getting a downtime of 4 hrs to do porting of bootdisks.
Currently, the system is running on Sf4800. 2 internal disk 36G connected to a SE3510 storage.
We're getting 72G disks and we want to restore the OS from the current 36G to the 72G disk. System is under veritas volume manager ctrl.... (4 Replies)
friends , need a shell script to create a disk load. can any one pls guide me with how this can be implemented. Pls provide the concept. from there i will try to design my script. (3 Replies)
Hi,
I would like to know how to find out disk capacity if it is assigned from the storage as a lun.
as per below command , I am unable to find out disk capacity.
$ bash
bash-3.00$ lspv
hdisk1 0001579a7fa3c086 None
$ lscfg -vl hdisk1
hdisk1 ... (8 Replies)
Hi all,
I am new to Unix and I want to write a shell script in a jumpbox for finding the filesystem capacity on 50 unix servers ( by ssh ) and then email the result in HTML format with server name and capacity % to a specific outlook distribution list.
any suggestion would be of great help. (17 Replies)
Hi Guys,
I'm a newb at shell scripting and successfully attempted a small disk space script (victory!!) but i'm wondering whether it actually takes into consideration KB,MB,GB. Please take a look at the script and advise.
##script to check if file sys has reached threshold.
... (3 Replies)
Hello.. I wrote the following shell script to run disk quotas for assigning limits to users. I need to know the partition which the user has created and mount it. So i copied the partitions (which will be displayed after running fdisk -l) and separted the last line from it and cut the required... (0 Replies)
i have a query on checking Tru64 disk drives physical capacity.
i used hwmgr view devices and saw this disk.
160: /dev/disk/dsk7c COMPAQ BF03688284 bus-3-targ-0-lun-0
checking the model on the internet shows it is a 36.4GB drive.
i checked the disk details and saw the... (2 Replies)
Hi, i am new in shell script. i have given a task to make a C-shell script. I have list of ip address and device name respectively. For example;
cal 1 : 100.21.25.10
cal 2 : 100.21.25.11
cal 3 : 100.21.25.12
cal 4 : 100.21.25.14
and so on...
Right now, i have this.
#! /bin/csh -f
... (0 Replies)
Discussion started by: lattey
0 Replies
LEARN ABOUT NETBSD
cut
CUT(1) BSD General Commands Manual CUT(1)NAME
cut -- select portions of each line of a file
SYNOPSIS
cut -b list [-n] [file ...]
cut -c list [file ...]
cut -f list [-d delim] [-s] [file ...]
DESCRIPTION
The cut utility selects portions of each line (as specified by list) from each file and writes them to the standard output. If the file
argument is a single dash ('-') or no file arguments were specified, lines are read from the standard input. The items specified by list can
be in terms of column position or in terms of fields delimited by a special character. Column numbering starts from 1.
list is a comma or whitespace separated set of increasing numbers and/or number ranges. Number ranges consist of a number, a dash (-), and a
second number and select the fields or columns from the first number to the second, inclusive. Numbers or number ranges may be preceded by a
dash, which selects all fields or columns from 1 to the first number. Numbers or number ranges may be followed by a dash, which selects all
fields or columns from the last number to the end of the line. Numbers and number ranges may be repeated, overlapping, and in any order. It
is not an error to select fields or columns not present in the input line.
The options are as follows:
-b list The list specifies byte positions.
-c list The list specifies character positions.
-d string Use the first character of string as the field delimiter character. The default is the <TAB> character.
-f list The list specifies fields, separated by the field delimiter character. The selected fields are output, separated by the field
delimiter character.
-n Do not split multi-byte characters.
-s Suppresses lines with no field delimiter characters. Unless specified, lines with no delimiters are passed through unmodified.
EXIT STATUS
cut exits 0 on success, 1 if an error occurred.
SEE ALSO paste(1)STANDARDS
The cut utility conforms to IEEE Std 1003.2-1992 (``POSIX.2'').
BSD December 21, 2008 BSD