I need this script to check if the first 3 letters of the file name are capital.
Currently it finds the first frame of the sequence and tests that against the naming convention. It works well but the first 3 have to be caps and they aren't consistant.
The convention is "TWH_000_000_xxx_v00.000000.dpx"
Thanks in advance.
---------- Post updated at 03:09 PM ---------- Previous update was at 03:08 PM ----------
One more thing, it would be great if it could list the owner of the file as well.
I wish to seach a Dir for a specific file, once the file is found i will perform additional logic. If the file is not found within two hours, i would like to exit.
Logically, I'm looking for the best way to approach this
Thanks for any assistance in advance.
Note: I'm using a C shell and... (2 Replies)
Hi All,
I need to know standard naming convention for Unix libraries (including all flavours of unix)..As I have gone through some sites and found out
The UNIX convention for naming of libraries is
lib<name>.so.<major>.<minor>.<revision>
so is it statndard . also does it change... (0 Replies)
OK, so a quick background:
I am a sys admin for a 1:1 deployment in academia with Macbooks, totaling around 6,000. Macbooks get shifted around from building to building and go to and from the repair center if hardware repair is needed. Often, some machines will get moved from one building to... (8 Replies)
Advance Thanks.
(1) I would like to know any unix/Linux command to check EOF char in a file.
(2) Or Any way I can check a file has been reached completely at machine B from machine A. Note that machine A ftp/scp the file to machine B at unknown time. (5 Replies)
I know how to check if any file has a unix process using a file by looking at 'lsof <fullpath/filename>' command.
I think using lsof is very expensive. Also to make it accurate we need to inlcude fullpath of the file.
Is there another command that can tell if a file has a truely active... (12 Replies)
For the selection of motherboards, is there any naming convention in the type numbers? There is usually a brand name and sometimes a version name, but more essential details like form factor, SATA speed and maximum amount of RAM is never given. Is there a reason for that? Is there any background... (2 Replies)
Hi ,
i have below files in wrk folder. file names are
1102090001.CLT
1102090003.CLT
1102100019.CLT
1102100020.CLT
the above files are concatenate to one file but that concatenate file name must be same naming convention. (date +%y%m%d)and 0001 count.
example : concatenate file... (9 Replies)
Hi Guys,
Where would i find the list of distribution codes.
For example.
samba-32bit-3.4.2 -1.1.3.1.x8664.rpm
In above rpm file it is indicated that its release is 1.1.3.1 .
The rpm is meant to be run for opensuse.
Where would i get the linking of release number and distribution.
... (2 Replies)
Hi,
I am installing a new RHEL 5 application server containing JBOSS along with other specific 3rd party applications. I know that this usually gets installed in /opt but I was thinking of installing these on a new separtate lv / file system instead.
i.e.
/<my_new_FS_name>
rather than... (6 Replies)
Hi
Currently we have nmon running on our Red hat Linux server.
The ouput file is now coming with the naming convention as "servername_160321_0010.nmon".
The output file naming convention has to be changed as "nmon_servername_daily_2016.03.21_00.00.00"
How can we do it ? Any suggestions... (10 Replies)
Discussion started by: newtoaixos
10 Replies
LEARN ABOUT DEBIAN
pfsinimgmagick
pfsinimgmagick(1) General Commands Manual pfsinimgmagick(1)NAME
pfsinimgmagick - Load images or frames using ImageMagick++ library
SYNOPSIS
pfsinimgmagick (<file> [--linear] [--absolute <max_lum>] [--frames <range>] [--skip-missing]) [<file>...]
DESCRIPTION
This command can load images or frames in the multitude of image formats supported by the ImageMagick library. This includes but is not
limited to: BMP, JPG, PNG, GIF, EPS, TIFF, DPX. See the manual page of ImageMagick for the full list of available formats.
pfsinimgmagick reads images or frames from files and writes pfs stream to the Standard Output. The pfs stream is usually piped to another
program for further processing. To detect the format automatically based on the extension, use pfsin command.
The output of pfsinimgmagick is scaled to 0-1 range, unless '--absolute' option is specified. By default, the 'LUMINANCE' tag is set to
'DISPLAY' contents. Using the '--linear' switch you can force the inverse sRGB transformation to provide linear data. In this case the
'LUMINANCE' tag is set to 'RELATIVE' contents. '--absolute' switch can be used to convert pixels to absolute luminance values.
This command handles properly 'alpha' channel (transparency) stored in images.
Each file can contain a %d pattern, which is substituted with frame numbers. The pattern has the same syntax as C printf command. For exam-
ple, you can use %04d to make the frame number four digit with proceedings zeros. You can select the frames using the following options
(the options must be always given after the file name):
--frames <range>
Range is given in mathlab / octave format:
startframe:step:endframe
Frame numbers start with startframe (default 0), are increased by step (default 1) and stop at endframe You can skip one of those
values, for example 1:100 for frames 1,2,...,100 and 0:2: for frame 0,2,4,... up to the last file that exists.
--skip-missing
Skip up to ten frames in a row if corresponding files are missing. Otherwise the program stops reading sequence at the first file
that does not exists. This switch does not apply to the first frame in a sequence. This switch can be useful if there is a rendered
animation where some of the frame has not been generated.
--linear, -l
Converts pixel values to linear luminance (XYZ), assuming the sRGB color space for the input image. The maximum pixel value
(255,255,255) is mapped to Y=1. LUMINANCE tag is set to RELATIVE.
--absolute <max_lum>, -a <max_lum>
--absolute converts pixel values to an absolute linear luminance (XYZ), that is the color space, in which channel Y contains lumi-
nance given in cd/m^2. The sRGB color space is assumed for the input image. The maximum pixel value (255,255,255) is mapped to
Y=<max_lum>. <max_lum> is typically set to 80 [cd/m^2] for a CRT monitor. LUMINANCE tag is set to ABSOLUTE. --absolute process
images almost the same as --relative, but additionally it scales all pixels by <max_lum>.
EXAMPLES
pfsinimgmagick frame%04d.dpx --frames 0:10 | pfsview
Read frames from files frame0000.dpx, frame0001.dpx, ..., frame0010.dpx and show them using pfsview.
BUGS
pfsinimgmagick can not read frames from the Standard Input.
Please report bugs and comments on implementation to the discussion group http://groups.google.com/group/pfstools
SEE ALSO pfsin(1), pfsout(1)ImageMagick(1)pfsinimgmagick(1)