03-26-2012
hi,
map the disks to the lpar(s), and create the concurrent vg there
local vio-server disks, or external storage?
I would create the vg on one lpar, create all the filesystems etc. switch to concurrent mode
then varyoff and import on the other lpar, using the same vg major number
just ask if you need more details
This User Gave Thanks to funksen For This Post:
10 More Discussions You Might Find Interesting
1. AIX
Hi,
I define 2 new LV on the vio server and run a cfgmgr on the partition and see my 2 new hdisk (hdisk6 and hdisk7).
I extend my vg vg000 (on the partition) and add the 2 hdisks.
I had a filesystem on the vg000 and when I added the disk I would like to increase the filesystem. But I cannot do a... (0 Replies)
Discussion started by: touny
0 Replies
2. AIX
We have a frame the uses 2 vios that assign disk storage to LPAR's. We have a LPAr with multiple disk and I want to know how do I tell which vio is serving the disk. For example the LPAr has hdisk 0, 1, 2, 3 all the same size. I want to know which vio is serving hdisk0, 1. (4 Replies)
Discussion started by: daveisme
4 Replies
3. AIX
Hi,
I want to know wheather partition size for installation of vio client can be specified on vio server
example
If I am installing vio server on blade with 2*300gb hard disk,after that I want to create 2 vio client (AIX Operating system) wheather I can specify hard disk size while... (1 Reply)
Discussion started by: manoj.solaris
1 Replies
4. AIX
hello Folks,
my vio:
$ lsmap -all
SVSA Physloc Client Partition ID
--------------- -------------------------------------------- ------------------
vhost0 U9117.MMA.6534BE4-V2-C11 0x00000003
VTD ... (0 Replies)
Discussion started by: filosophizer
0 Replies
5. AIX
VIO Server is managing both AIX Clients and Linux Clients. For AIX Clients, we could do a disk mapping from slot numbers to VIO and also uname -L to determine the lparid and serial number frame its running on.
From a Linux Client,
How do I know which IBM frame its running on? Any command to... (4 Replies)
Discussion started by: rpangulu
4 Replies
6. AIX
Hi
I need to do the migratepv for the rootvg disks of the vio servers ? The current rootvg disks are on DMX3 storage and the new disks will be given from VMAX. Our setup is dual vio servers with multipathing to the vio clients.
What is the command to do the migratepv for the vio rootvg disks... (5 Replies)
Discussion started by: newtoaixos
5 Replies
7. AIX
Hi
In the vio server when I do # lsattr -El hdisk*, I get a PVID. The same PVID is also seen when I put the lspv command on the vio client partition. This way Im able to confirm the lun using the PVID.
Similarly how does the vio client partition gets the virtual ethernet scsi client adapter... (1 Reply)
Discussion started by: newtoaixos
1 Replies
8. AIX
Hi,
I would like to know installing vio server on local disk and mirroring rootvg,
if I am creating AIX VIO CLIENT(lpar),
and any of single local hard disk failuare.
will it affect lpars? will lpars able to boot.
what needs to be done? (1 Reply)
Discussion started by: manoj.solaris
1 Replies
9. AIX
:wall::wall::wall:
1. I have created an LPAR in the HMC.
2. I have allocated the storage from an Hitachi AMS2500 and assigned it to the host group.
3. I have zoned the LPAR and Storage on a Brocade 5100. (The zone sees the AMS)
Next I activated the LPAR in the HMC, SMS mode for the mksysb... (3 Replies)
Discussion started by: Dallasguy7
3 Replies
10. AIX
Hi,
I am facing an issue in vio server. When I run
bosboot -ad /dev/hdisk0
I am getting an error
trustchk: Verification of attributes failed: /usr/sbin/bootinfo
: accessauths
regards,
vjm
Please use code tags next time for your code and data. (8 Replies)
Discussion started by: vjm
8 Replies
LEARN ABOUT OSF1
secconfig
secconfig(8) System Manager's Manual secconfig(8)
NAME
secconfig, secsetup - Security features setup graphical interface (Enhanced Security)
SYNOPSIS
/usr/sbin/sysman secconfig
NOTE: The secsetup utility has been replaced by the secconfig graphical interface.
DESCRIPTION
The utility is a graphical interface used to select the level of system security needed. It can convert from Base to enhanced security
mode, and configure base and enhanced security features. If you are using secconfig to enable Enhanced security, you must first have
loaded the enhanced security subsets.
You can run while the system is in multiuser mode. However, if you change the security level, the change is not completed until you reboot
the system.
For both base and enhanced security, the secconfig utility allows you to enable segment sharing, to enable access control lists (ACLs), and
to restrict the setting of the execute bit to root only.
For enhanced security, the secconfig utility additionally allows you to configure security support from simple shadow passwords all the way
to a strict C2 level of security. Shadow password support is an easy method for system administrators, who do not wish to use all of the
extended security features, to move each user's password out of /etc/passwd and into the extended user profile database (auth.db. You can
use the Custom mode if you wish to select additional security features, such as breakin detection and evasion, automatic database trimming,
and password controls.
When converting from base to enhanced security, secconfig updates the system default database (/etc/auth/system/default) and uses the con-
vuser utility to migrate user accounts.
While it is possible to convert user accounts from enhanced back to base, the default encryption algorithms and supported password lengths
differ between base and enhanced security, and thus user account conversions do not succeed without a password change.
NOTE: Because of the page table sharing mechanism used for shared libraries, the normal file system permissions are not adequate to protect
against unauthorized reading. The secconfig interface allows you to disable segment sharing. The change in segment sharing takes effect
at the next reboot.
FILES
RELATED INFORMATION
acl(4), authcap(4), default(4), convuser(8),
Security delim off
secconfig(8)