I have a small problem with a v445 which I have been informed will only boot with the reconfigure option enabled.
It is attached to HP SAN storage using qla2300 FCA's with a Veritas encapsulated rootvoldg (No Laughing here please) when I try a reboot I get the following error.
I've been told that the IBM vpath drivers were installed in anticipation of the server being moved onto the new SAN, but there was no reboot carried out.
I have manually mounted the root plexes and removed the vpath drivers from /kernel/drv/sparcv9 but the damn thing won't boot.
Hello.
System is a HP Visualize C3600 running X11 and after a power failure machine will not boot (see error messages below)
From what I've read, this may be caused by a corrupted etc/inittab file. Solution suggested on other websites is to boot in single user mode and edit file inittab... (2 Replies)
Hi all
I used a dual boot operating system and it works fine for me. Now , i install a Ati radeon 9250 Agp card on my system and this results in boot failure of fedora 6. The graphics card is working fine with windows XP , i.e i have no compatibility issues.The system also refuses to boot when i... (2 Replies)
I installed solaris virtually and tried to format the partitions .. I dont know what went wrong, It got rebooted and hangs in the screen "No partitions" and after pressing Enter button it goes to "INT18 boot failure" and hangs there once again . Could any one of you suggest why this has happened... (3 Replies)
I have installed Solaris 10 OS in Sun Virtual Box that uses x86 32 bit system. After an abnormal shutdown i'm getting the following message on the console when i try to boot.
SunOS Release 5.10 Version Generic_127128_11 32-bit
Copyright 1983-200 Sun Microsystems, Inc. All rights reserrved.
Use... (3 Replies)
hi
SCO Unix 5.0.6 doesn't boot due to this problem:
not a directory
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot
Knows someone howto solve it? (16 Replies)
This is what is displayed on the screen as the system tries to boot and then hangs:
0>Test CPU(s)....Done
0>Interrupt Crosscall....|
SC Alert: DHCP negotiation failed, perhaps misconfigured or no DHCP server avail
able
Done
0>Init Memory....|
SC Alert: Host System has Reset
'Done
0>PLL... (2 Replies)
Hi,
i am running an old Opensolaris 5.11 snv_111b on an x86 server. After almost 4 years of successful service, last night out of the blue started to refuse all connections to it's services, ssh, http,etc. The only visible solution at that time was a restart. But now instead of booting the... (2 Replies)
When I login to the live console of my server and go to the console, I am getting the below message
Processor is booting from the first available device.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Trying Primary Boot Path... (11 Replies)
Discussion started by: chacko193
11 Replies
LEARN ABOUT BSD
qlc
qlc(7D)qlc(7D)NAME
qlc - ISP2200, ISP2300, and SP212 Family Fibre Channel host bus adapter driver.
SYNOPSIS
SUNW,qlc
The qlc host bus adapter driver is a Sun Fibre Channel transport layer-compliant nexus driver for the Qlogic ISP2200, ISP2200A, ISP2310,
ISP2312, and SP212 adapters. These adapters support Fibre Channel SCSI and IP Protocols, FC-AL public loop profile, point-to-point fab-
ric connection and Fibre Channel service classes two and three (see NOTES section below).
The qlc driver interfaces with the Sun Fibre Channel transport layer to support the standard functions provided by the SCSA interface. It
supports auto request sense and tagged queueing by default. The driver requires that all devices have unique hard addresses in private
loop configurations. Devices with conflicting hard addresses are not accessible.
/kernel/drv/qlc
32-bit ELF kernel module ()
/kernel/drv/amd64/qlc
64-bit ELF kernel module ()
/kernel/drv/sparcv9/qlc
64-bit ELF kernel module (SPARC)
/kernel/drv/qlc.conf
Driver configuration file
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |SPARC, |
+-----------------------------+-----------------------------+
|Availability |SUNWqlc |
+-----------------------------+-----------------------------+
prtconf(1M), driver.conf(4), fcp(7D), fp(7D)
Writing Device Drivers
ANSI X3.230:1994, Fibre Channel Physical Signaling (FC-PH)
Project 1134-D, Fibre Channel Generic Services (FC-GS-2)
ANSI X3.269-1996, Fibre Channel Arbitrated Loop (FC-AL)
ANSI X3.270-1996, Fibre Channel Protocol for SCSI (FCP-SCSI)
ANSI X3.270-1996, SCSI-3 Architecture Model (SAM)
Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA)
Fabric Loop Attachment (FC-FLA)
ISP2200 Firmware Interface Specification, QLogic Corporation
ISP2300 Series Firmware Specification, QLogic Corporation
NOTES
SP-212-based host bus adapters (including QLA-210) are supported on x86 platforms only and are limited to a maximum of 8 targets in fab-
ric and sixteen targets in local loop topology. FL topology is not supported with the SP-212-based host bus adapter.
21 Feb 20054 qlc(7D)