hello all,
instead of type pwd everytime to find down where I am at. is there a command set prompt to put in to your profile on shell so it invisible every you type cd?
thanks in advance... (3 Replies)
When I installed the SOLARIS 10 OS first time, the desktop would not start up, this was because of network setup. Reinstalled worked. After a week due to some problem I had to reinstall OS, installation went fine and but when i reboot I get this error.
cannot find mis/krtld
boot error loading... (0 Replies)
Im trying to setup my profile to export the PATH at login
i had this in my .bashrc
export PATH=/usr/local/bin:/usr/bin/
however when i login and type echo $PATH i only get
bash-2.05$ echo $PATH
/usr/bin:
any ideas on what im doing wrong?
ive used linux for years but this is my... (1 Reply)
Hi All,
I am trying to make a Boot from San setup on 11.31 IA64 (rx2660). The San array I am using is EMC Clariion with failover mode ALUA.
Now, My setup is ready and I am able to boot my host from the Lun. I have 4 paths to my Lun from my host. Question is how do I add the entries in EFI... (0 Replies)
Hi all ,
I am trying to isntallsolaris 10 using a DVD , But when i try to boot from the OB Prompt i am getting this error :
Rebooting with command: boot cdrom -install
Boot device: /pci@1f,700000/pci@0/pci@1/pci@0/ide@1f/cdrom@0,0:f File and args: -install
Can't read disk label.
Can't open... (2 Replies)
I am trying to install Solaris x86 using the Jumpstart server. I run the add_install_client command with appropriate options, and reboot my x86 Target box. The installation starts fine and unattended. After the installation completes and the target goes for a re-boot, it does not boot from the HDD... (9 Replies)
Hi,
I have an Oracle/Sun T3-2 Server with a duel SAS controller Fujitsu DX60 array attached.
I have 2 x SAS HBA's in the T3-2. One HBA cabled to CM0 and one HBA cabled to CM1 of the array.
The array is setup with one RAID GROUP and one VOLUME and one LUN
In Solaris I can see one device... (4 Replies)
Hi,
I am running into a some problems creating a dual boot system of 2 solaris instances using ZFS file system and I was wondering if someone can help me out.
First some back ground. I have been asked to change the file system of our server from UFS to ZFS. Currently we are using Solaris... (3 Replies)
Hello,
I have a problem with my machine that won't boot properly.
The story is that I installed a software called apcupsd, which is a control application for my APC battery UPS. I have used version 3.14.10 earlier, but as part of restoring my previously crashed os harddrive I wanted to... (18 Replies)
Discussion started by: Zorken
18 Replies
LEARN ABOUT SUNOS
bootctl
BOOTCTL(1) bootctl BOOTCTL(1)NAME
bootctl - Control the firmware and boot manager settings
SYNOPSIS
bootctl [OPTIONS...] status
bootctl [OPTIONS...] list
bootctl [OPTIONS...] update
bootctl [OPTIONS...] install
bootctl [OPTIONS...] remove
DESCRIPTION
bootctl checks, updates, installs or removes the boot loader from the current system.
bootctl status checks and prints the currently installed versions of the boot loader binaries and all current EFI boot variables.
bootctl list displays all configured boot loader entries.
bootctl update updates all installed versions of systemd-boot, if the current version is newer than the version installed in the EFI system
partition. This also includes the EFI default/fallback loader at /EFI/BOOT/BOOT*.EFI. A systemd-boot entry in the EFI boot variables is
created if there is no current entry. The created entry will be added to the end of the boot order list.
bootctl install installs systemd-boot into the EFI system partition. A copy of systemd-boot will be stored as the EFI default/fallback
loader at /EFI/BOOT/BOOT*.EFI. A systemd-boot entry in the EFI boot variables is created and added to the top of the boot order list.
bootctl remove removes all installed versions of systemd-boot from the EFI system partition, and removes systemd-boot from the EFI boot
variables.
If no command is passed, status is implied.
OPTIONS
The following options are understood:
-h, --help
Print a short help text and exit.
--version
Print a short version string and exit.
--path=
Path to the EFI System Partition (ESP). If not specified, /efi, /boot, and /boot/efi are checked in turn. It is recommended to mount
the ESP to /boot, if possible.
-p, --print-path
This option modifies the behaviour of status. Just print the path to the EFI System Partition (ESP) to standard output and exit.
--no-variables
Do not touch the EFI boot variables.
EXIT STATUS
On success, 0 is returned, a non-zero failure code otherwise.
SEE ALSO
Boot loader specification[1] systemd boot loader interface[2]
NOTES
1. Boot loader specification
https://www.freedesktop.org/wiki/Specifications/BootLoaderSpec
2. systemd boot loader interface
https://www.freedesktop.org/wiki/Software/systemd/BootLoaderInterface
systemd 237BOOTCTL(1)