Sponsored Content
Operating Systems AIX Where is the same TCP parameters in AIX? Post 302611513 by nnnnnnine on Friday 23rd of March 2012 02:38:24 AM
Old 03-23-2012
Dear zxmaus

Thanks for your help!

You are right, the parameter tcp_deferred_ack_interval may equal to tcp_nodelayack.

but I am not sure tcp_deferred_ack_max is equal to tcp_nagle_limit

because I find a Solaris document(tcp_deferred_acks_max) ,
that has "tcp_deferred_ack_max" parameter's description:
(I compare it with AIX no man page.)
Quote:
Species the maximum number of TCP segmentsreceived from
remote destinations(not directly connected) before an acknowledgment(ACK)is generated.
TCP segments are measured in units of maximum segmentsize(MSS) for individual connections.

If set to 0 or 1,no ACKs are delayed,assuming all segments are 1 MSS long.
The actual number is dynamically calculated for each connection.
The value is the default maximum.
Quote:
tcp_nagle_limit
Purpose:
This is the Nagle Algorithm threshold in bytes which can be used to disable Nagle.
Tuning:
The default is Nagle turned on. To disable Nagle, set this value to 0 or 1. TCP disables Nagle for data segments larger than or equal to this threshold value.
Any suggestion ?
 

10 More Discussions You Might Find Interesting

1. IP Networking

IBM-AIX and TCP/IP Problem

I am having a problem and I feel it's network related. I have an RS6000 running AIX. I use a terminal emulation program that allows me to connect to my server via TCP/IP. When I try and make the connection, it takes F-O-R-E-V-E-R to get a login prompt on the screen. I also cannot ftp to... (3 Replies)
Discussion started by: Docboyeee
3 Replies

2. Cybersecurity

AIX: Default Password Parameters

I am working on AIX flavor of Unix and was trying to run a script to obtain default settings of user passwords. The script uses the command to obtain default valid user attributes for: /etc/security/user for some reason, the message says- cat: cannot open /etc/security/user... (1 Reply)
Discussion started by: eysheikah
1 Replies

3. UNIX for Advanced & Expert Users

How to Find AIX system parameters

System Parameters: maximum number of processes = 2048 Network parameters: ipqmaxlen - 512 rfc1323 - 1 sb_max - 1310720 (2*655360) tcp_recvspace - 65536 tcp_sendspace - 65536 Udp_recvspace - 655360 Udp_sendspace 65536 (1 Reply)
Discussion started by: R00tSc0rpi0n
1 Replies

4. UNIX for Dummies Questions & Answers

Changing TCP parameters in solaris10

Hi I have to change some TCP settings in Solaris10 machine running on AMD. Is there any tool or GUI to do this. I want to see if there is any easy way to put them in the startup scripts. Thanks (1 Reply)
Discussion started by: sssow
1 Replies

5. AIX

TCP port 70000 on AIX 6.1? (Surely higher than allowed maximum?)

Looking at /etc/services on AIX 6.1, I noticed some bizarre port numbers which exceed the 16-bit maximum port number for TCP (i.e. they are higher than 65535.) sco_printer 70000/tcp sco_spooler # For System V print IPC sco_s5_port 70001/tcp lpNet_s5_port ... (5 Replies)
Discussion started by: garethr
5 Replies

6. AIX

AIX 6.1 Kernal Parameters ulimit

Hello, How can I setup the ulimit for memory permanent ulimit -m unlimited ulimit -a Output from the ulimit command should be similar to the following:time(seconds) unlimited file(blocks) unlimited data(kbytes) 2097152 stack(kbytes) 32768... (4 Replies)
Discussion started by: filosophizer
4 Replies

7. AIX

TCP/UDP port range for default AIX NFS?

May I know what is the TCP/UCP port range for any default AIX NFS? Based on rpcinfo -p, I got the following output: program vers proto port service 100000 4 udp 111 portmapper 100000 3 udp 111 portmapper 100000 2 udp 111 portmapper 100000 4 ... (4 Replies)
Discussion started by: famasutika
4 Replies

8. AIX

TCP Wrappers on AIX 5.3

Hi, I have in my organization varied OS types (AIX,RHEL,Solaris) My need was to block ftp connections from some addresses on my organization, but to not disable the protocol. In the linux servers i did that with the hosts.deny file that used by the vsftpd deamon. In my AIX servers, i have... (6 Replies)
Discussion started by: moshesa
6 Replies

9. AIX

Network tuning parameters on AIX

Hi, we've a gigabit Ethernet adapter. And we wanted to improve the performance by tuning network parameters. so' as per IBM info center, http://publib.boulder.ibm.com/infocenter/aix/v7r1/index.jsp?topic=%2Fcom.ibm.aix.prftungd%2Fdoc%2Fprftungd%2Fnetw_opt.htm we tried changing the tuning... (2 Replies)
Discussion started by: System Admin 77
2 Replies

10. Solaris

Too much TCP retransmitted and TCP duplicate on server Oracle Solaris 10

I have problem with oracle solaris 10 running on oracle sparc T4-2 server. Os information: 5.10 Generic_150400-03 sun4v sparc sun4v Output from tcpstat.d script TCP bytes: out outRetrans in inDup inUnorder 6833763 7300 98884 0... (2 Replies)
Discussion started by: insatiable1610
2 Replies
synos(1)							Mail Avenger 0.8.3							  synos(1)

NAME
synos - guess operating system from TCP SYN fingerprint SYNOPSIS
synos [--mtu mtu] [--db path] syn-fingerprint DESCRIPTION
synos takes a SYN fingerprint, in the format described for the CLIENT_SYNFP environment variable in the avenger(1) man page, and outputs a guess as to the type of the client operating system. synos makes use of the OpenBSD SYN fingerprint database (which is also repackaged with Mail Avenger). OPTIONS --mtu val Certain operating systems set the initial TCP window size based on the maximum transmission unit, or MTU, of the network. For such operating systems, synos usually checks the window size using both the client's MSS option plus 40 bytes (for TCP and IP headers), or a hard-coded MTU, which defaults to 1,500 bytes. If either value works, the fingerprint is considered to match the operating system. You can change the value 1,500 by specifying this option. A value of 0 tells synos to use only the value derived from the MSS option. --db file Specifies an alternate location for the SYN fingerprint database. FILES
/usr/local/share/pf.os Default location of SYN fingerprint database. SEE ALSO
avenger(1), asmtpd(8) The Mail Avenger home page: <http://www.mailavenger.org/>. The OpenBSD home page: <http://www.openbsd.org/>. BUGS
The operating system type is determined by heuristics that are not always reliable. Moreover, not all operating systems can be distinguished. The database may not even contain a client's particular operating system and version. It is not hard to fool synos deliberately by changing TCP socket options or injecting raw packets onto the network. AUTHOR
David Mazieres Mail Avenger 0.8.3 2012-04-05 synos(1)
All times are GMT -4. The time now is 09:45 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy