Do you have other HP boxes you can try to connect to VxWorks? or Solaris or AIX boxes... (the encryption on linux and window are quite similar, it is not the case of HP and the others might also differ) my idea is I read some time ago issues with "not quite compatible" keys because of the way it is generated and it may be that looking on HP site you may find a patch bundle for this purpose... If I have a bit of spare time I will try to do some investigations but I am a bit lost since HP changed all their sites I have been fighting for months to get back my access to support with no success.. (It was dead simple during ITRC times...).
could you tell me using swlist -l product what (version) ssh you are using? e.g.
Hello HP-UX Gurus,
I am having issues trying to start an x-session via eXceed 7.1.
When I bring up eXceed via XDMCP Braodcast I see the host name and IP Address but when I try to connect the X window does not come up.
I made the modification to the following file “/etc/dt/config/Xaccess”... (2 Replies)
Hi friends
recently i have installed SXDE 1/08 into my machine,and i installed wifi driver also
its working fine,Recently i was unable to connect to Internet,I have not changed any configurations and any installations,thing is that i got my iwk0 interface is UP and IP address also and i can... (6 Replies)
I shall explain the situation that I am facing to the best extent possible. I require some help, as this situation is an urgent one.
I am trying to automate sending data from one AIX machine to another. A script runs that tries to push data received from an upstream application to another AIX... (7 Replies)
I am trying to connect to SQL plus through unix but i am getting below error
'ksh: sqlplus: not found'
note i am running this from /home/xxx
do i need to set any environmental variable for this. below is my code
echo " hello world"
sqlplus -s apps/CAF78GEN<<EOF
set heading... (4 Replies)
Hi,
I have been trying to connect to sqlplus the same way I used to do in my earlier company but I get these error messages , please suggest way out -
user name - xyzuser
schema name - xyzschema
$ sqlplus xyzuser@xyzschema
ksh: sqlplus: not found.
$ sqlplus -s xyzuser@xyzschema... (5 Replies)
I have managed to install Broadcom BCM43228 Wireless adapter on a laptop running CentOS 5.9 using instructions at:
wiki.centos.org/HowTos/Laptops/Wireless/Broadcom
I had the problem "Error for wireless request "Set Encode" (8B2A): SET failed on device... mentioned on the same page and solved... (0 Replies)
Hello,
I just installed CentOS 7 (Server with GUI) and guess what I could install Virtual Box Guest additions without installing any extra package/software which is great news !
Now bad news or not so great news.
My Host OS is Windows 10, Virtual Box is the virtualization software. CentOS7-1... (0 Replies)
hi
I am having issues when trying to connect using ftp, I am having the following error:
User (10.100.48.73:(none)): moz
331 Password required for moza.
Password:
530 Login incorrect.
Login failed.
ftp> by
221 Goodbye.
I have created a user like this:
useradd -g 10 -d /lam/moza -m -s... (11 Replies)
After following the instructions given by resident moderator Bakunin over here
https://www.unix.com/aix/279862-installed-memory-32gb-but-shows-only-16gb.html
#1 Connect to ASMI
#2 Configure the deconfigured memory
#3 Start the machine
OK, everything is fine, however now cannot connect to... (5 Replies)
Discussion started by: filosophizer
5 Replies
LEARN ABOUT DEBIAN
sslh
SSLH(1p) User Contributed Perl Documentation SSLH(1p)NAME
sslh - Switch incoming connection between SSH and SSL/HTTPS servers
SYNOPSIS
sslh [ -v ] [ -p [host:]port ] [ -t timeout ]
[ --ssh [host:]port ] [ --ssl [host:]port ]
DESCRIPTION
sslh is a simple script that lets you switch an incoming connection on a single port between distinct SSH and SSL/HTTPS servers.
sslh listens for connections on a port and is able to redirect them either to an HTTPS web server or a SSH server.
This lets one setup both a HTTPS web server and a SSH server and access them through the same host+port.
OPTIONS
The program follows the usual GNU command line syntax, with long options starting with two dashes.
-p, --port [host:]port
The port the proxy will listen to. If no port is given, 443 is used by default. If no host is given, "localhost" is used by default.
-s, --ssh [host:]port
The SSH server which the SSH connections must be forwarded to. If omitted, the default is localhost:22.
-l, --ssl, --https [host:]port
The HTTPS server which the HTTPS connections must be forwarded to. If omitted, the default is localhost:443.
-t, --timeout delay
Timeout in seconds before a silent incoming connection is considered as a SSH connection. The number can be fractional.
The default is 2seconds.
-v, --verbose
Verbose output. This option can be used several times for more verbose output.
EXAMPLE OF USE
Is this tool actually useful? Yes.
For example one can use it to access both a SSH server and a secure web server via a corporate proxy that only accepts to relay connections
to port 443. Creating a tunnel that passes SSH connection through a CONNECT-enabled web proxy is easy with connect-tunnel (also included in
the "Net::Proxy" distribution).
The proxy will let both SSH and HTTPS connections out (since they all point to port 443), and the home server will connect those incoming
connections to the appropriate server. This only requires to run the HTTPS server on a non standard port (not 443).
TECHNICAL NOTE
How can this proxy find out what kind of protocol is using a TCP connection to port 443, without being connected (yet) to the server? We
actually rely on a slight difference between the SSL and SSH protocols (found thanks to ethereal):
SSH Once the TCP connection is established, the server speaks first, presenting itself by saying something like:
SSH-2.0-OpenSSH_3.6.1p2 Debian 1:3.6.1p2-1
SSL With SSL, it's always the client that speaks first.
This means that sslh can be used with any pair of protocols/services that share this property (the client speaks first for one and the
server speaks first for the other).
AUTHORS
Original idea and C version
Frederic Ple "<sslh@wattoo.org>".
Perl versions
Philippe 'BooK' Bruhat "<book@cpan.org>".
SCRIPT HISTORY
Version 0.01 of the script was a quick hack designed in 2003 as a proof of concept.
Version 0.02 (and higher) are based on "Net::Proxy", and included with the "Net::Proxy" distribution. Version 0.02 didn't work, though.
Version 0.03 correctly initialised the "in" connector.
Version 0.04 lets the proxy listen on any address (instead of "localhost", which is still the default). Thanks to Dieter Voegtli for
spotting this.
SEE ALSO
Net::Proxy, Net::Proxy::Connector::dual.
COPYRIGHT
Copyright 2003-2006, Philippe Bruhat. All rights reserved.
LICENSE
This module is free software; you can redistribute it or modify it under the same terms as Perl itself.
perl v5.10.1 2009-10-18 SSLH(1p)