03-20-2012
Solaris syslog server and client
Hi folks,
I am attempting to setup a Solaris 10 syslog server to receive logs from linux machines. Here's what I did:
On the server (SunOS sun226 5.10), IP address: 192.168.212.226:
1. start syslogdby issuing $/usr/sbin/syslogd -T
On a client (SunOS sun221 5.8):
1. Configured /etc/syslog.conf to send logs to server using @server_ip_address
Below is the syslog.conf:
================
#ident "@(#)syslog.conf 1.5 98/12/14 SMI" /* SunOS 5.0 */
#
# Copyright (c) 1991-1998 by Sun Microsystems, Inc.
# All rights reserved.
#
# syslog configuration file.
#
# This file is processed by m4 so be careful to quote (`') names
# that match m4 reserved words. Also, within ifdef's, arguments
# containing commas must be quoted.
#
*.err;kern.notice;auth.notice /dev/sysmsg
*.err;kern.debug;daemon.notice;mail.crit /var/adm/messages
*.alert;kern.err;daemon.err operator
*.alert root
*.emerg *
local7.info /var/log/local7.debug
*.info;mail.none;authpriv.none;cron.none @192.168.212.226
authpriv.* @192.168.212.226
*.debug /var/adm/messages
*.info @192.168.212.226
auth.* @192.168.212.226
# if a non-loghost machine chooses to have authentication messages
# sent to the loghost machine, un-comment out the following line:
#auth.notice ifdef(`LOGHOST', /var/log/authlog, @loghost)
mail.debug ifdef(`LOGHOST', /var/log/syslog, @loghost)
#
# non-loghost machines will use the following lines to cause "user"
# log messages to be logged locally.
#
ifdef(`LOGHOST', ,
user.err /dev/sysmsg
user.err /var/adm/messages
user.alert `root, operator'
user.emerg *
)
I am not receiving any communication between server and client.
There are no messages logged at /var/adm/messages on the server.
What am I missing? Thanks
10 More Discussions You Might Find Interesting
1. Shell Programming and Scripting
let me save everyone the pain that it caused me.
This is all free. And make sure it is in this order
1) make sure you have the latest version of perl installed
2) make sure you have NET:aemon installed
3) make sure you have RPC::PlServer & PlClient (the bundle has both)
4) make sure... (3 Replies)
Discussion started by: Optimus_P
3 Replies
2. Linux
Hi,
my problem is that I am not able to grand the nfs directory on a Fedora 7 server to a standard solaris client.
I always got the messages no permission.
Important: No change on the client (Solaris) is possible! So I am not able to change the NFS Version on the client side to force the... (3 Replies)
Discussion started by: joerg
3 Replies
3. Programming
Problem
- Linux Client/Server Socket Application: Preventing Client from quitting on server crash
Hi,
I am writing a Linux socket Server and Client using TCP protocol on Ubuntu 9.04 x64.
I am having problem trying to implement a scenario where the client should keep running even when the... (2 Replies)
Discussion started by: varun.nagpaal
2 Replies
4. Programming
Hello,
I have task to make a program that multiplies polynomials as client(input/output indexes)-server(multiplying) using RPC. However when I try to compile it with gcc it gives the next info:
for client:
Udefined first
symbol referenced
Clnt_create client.o
for server:
Udefined first... (5 Replies)
Discussion started by: manarina
5 Replies
5. Solaris
Hi,
I am trying to access a NFS shared directory on Solaris 10 Server from a client which is RHEL 4 Server.
On the NFS Server, in /etc/dfs/, I added following line to dfstab file.
& then ran the following
On the client machine, while running the mount command, I am... (0 Replies)
Discussion started by: SunilB2011
0 Replies
6. Red Hat
Hi,
I am trying to access a NFS shared directory on Solaris 10 Server from a client which is RHEL 4 Server.
On the NFS Server, in /etc/dfs/, I added following line to dfstab file.
share -F nfs -o rw /var/share
& then ran the following
svcadm -v enable -r... (3 Replies)
Discussion started by: SunilB2011
3 Replies
7. Solaris
How do i install ldap server and client in solaris server
how to configure ldap server and client
please help me (1 Reply)
Discussion started by: ainstin
1 Replies
8. Solaris
I have a Solaris 10 server, I'm trying to mount a share from a Windows nfs server. If I add this entry (tst-walnut:/test_sap_nfs - /majid nfs - yes rw,soft) to my /etc/vfstab, then I can mount, but when I create a file by root:root, the file owner changes to... (1 Reply)
Discussion started by: Hiroshi
1 Replies
9. Solaris
Based on the NIS migration tests I did and another question I posted earlier on.
https://www.unix.com/solaris/272021-solaris-8-md5-encryption-support.html
I tried to downgrade NIS linux encryption to DES to support solaris connection.
So I modified /etc/pam.d/system-auth as below,
password... (0 Replies)
Discussion started by: bestard
0 Replies
10. Solaris
Hi,
We just built a new Solaris 10 zone. And would like to add it to our DNS server. Its also Solaris 10. Please let me know how can I get the IP resolved using this DNS server. I added entry into zone config file but not working. I did restarted the DNS services. And also added nameserver name... (5 Replies)
Discussion started by: snchaudhari2
5 Replies
LEARN ABOUT SUSE
set_color
set_color(1) fish set_color(1)
NAME
set_color - set_color - set the terminal color
set_color - set the terminal color
Synopsis
set_color [-v --version] [-h --help] [-b --background COLOR] [COLOR]
Description
Change the foreground and/or background color of the terminal. COLOR is one of black, red, green, brown, yellow, blue, magenta, purple,
cyan, white and normal.
o -b, --background Set the background color
o -c, --print-colors Prints a list of all valid color names
o -h, --help Display help message and exit
o -o, --bold Set bold or extra bright mode
o -u, --underline Set underlined mode
o -v, --version Display version and exit
Calling set_color normal will set the terminal color to whatever is the default color of the terminal.
Some terminals use the --bold escape sequence to switch to a brighter color set. On such terminals, set_color white will result in a grey
font color, while set_color --bold white will result in a white font color.
Not all terminal emulators support all these features. This is not a bug in set_color but a missing feature in the terminal emulator.
set_color uses the terminfo database to look up how to change terminal colors on whatever terminal is in use. Some systems have old and
incomplete terminfo databases, and may lack color information for terminals that support it. Download and install the latest version of
ncurses and recompile fish against it in order to fix this issue.
Version 1.23.1 Sun Jan 8 2012 set_color(1)