03-18-2012
they are little files;
About few bytes for "synchro" files, and about few Kbytes for other.
I have never test with no_wdelay.
9 More Discussions You Might Find Interesting
1. Solaris
Ladies and Gentlemen:
I have successfully configured a Solaris 8 server with Jumpstart! I can Jumpstart Solaris 8 client systems with no problem. My configuration is as follows:
Jumpstart Server: Solaris 8 patched with Recommended Patches from June 05.
I have installed Solaris 8 in... (4 Replies)
Discussion started by: rambo15
4 Replies
2. Cybersecurity
The other day, a friend of mine had his Linux webserver compromised because he was running a vulnerable PHP-script. The "hacker" had used a malformed URL to include a wget-command to fetch some stuff off the net and install it in /dev/shm where it ran undetected. Fortunately, the webserver ran as a... (2 Replies)
Discussion started by: indo1144
2 Replies
3. AIX
Good morning to all,
can someone advise me how to setup aix ntp server with aix & wintel clients?
Secondly, I also require to enable the service to autostart on reboot, how do I configure this?
Thirdly, how do I configure daily autosync between clients and server?
Please advice, thanks.... (0 Replies)
Discussion started by: chongkls77
0 Replies
4. Solaris
Hello,
I have a centos as nfs server, its name is centos_A.
After I finish the setup of the nfs server, the other linux can access this nfs server immediately via /net/centos_A/*
But,
My solaris 9 can not access /net/centos_A/* immediately. I have to leave /net/centos_A, and wait for about... (1 Reply)
Discussion started by: bruceharbin
1 Replies
5. IP Networking
All of sudden in this morning, some computers could not connect to our UNIX server while other still could.
Some computers could ping the server while some could not.
Same on the server side.
It could ping some clients but not some.
All Windows clients could ping each other.
And more, the... (1 Reply)
Discussion started by: jonapa
1 Replies
6. Programming
Hello,
I have a question: I want to create a n client to one server connection. This is the client-server algorithm.
Enybody help to make the changes? (0 Replies)
Discussion started by: MaHmur
0 Replies
7. UNIX for Dummies Questions & Answers
Hello World,
We have a software repository server in our environment which we use as an NFS server.
Now this has been going on well before I was hired. Now, I observed many users not unmounting the NFS resources after their use. I ran showmount and it showed 513 current sessions.
:wall: Is... (7 Replies)
Discussion started by: satish51392111
7 Replies
8. Solaris
Hi,
I am having some NFS directory consistency problems with the below setup on a local (192.) network:
1. Different permissions (chmod) for the same NFS dir are reflected on different clients.
2. (more serious) an NFS dir created on client1 cannot be accessed on client2; this applies to some... (10 Replies)
Discussion started by: cosmojetz
10 Replies
9. AIX
Hi 2 ALL,
try to run NFS Server in AIX 7.1 :
1. Step by step on NFS Server node
mkdir /tmp/test
chgrp staff /tmp/test
chmod 775 /tmp/test-- create export directory (fs)
mknfsexp -d /tmp/test -t ro
exportfs -va
show mount -e
:/# exportfs -av
exports: 1831-187 re-exported /tmp/test... (4 Replies)
Discussion started by: penchev
4 Replies
LEARN ABOUT DEBIAN
mkfatimage16
MKFATIMAGE16(1) Make HDIMAGE for DOSEMU MKFATIMAGE16(1)
NAME
mkfatimage16 - generate a virtual drive image suitable for DOSEMU
SYNOPSIS
mkfatimage16 [ -b bsectfile ] [{ -t tracks | -k Kbytes }] [ -l volume-label ] [ -f outfile ] [ -p ] [ file... ]
DESCRIPTION
mkfatimage16 creates a hdimage file for DOSEMU that is pre-loaded with the files specified on the command line. The output is either writ-
ten to stdout (hence do not forget to append " > hdimagefile", else you will see garbage on the screen) or to the file specified by the -f
option. For the latter you may also use option -p in order to force padding up to the given size. This padding will result in so-called
holes on an ext2-FS, hence the actual disk usage will not be greater. The file created by mkfatimage16 then can be used as a virtual
drive, when defined in /etc/dosemu.conf. As long as -k is not given, the number of heads is always 4 and you have 17 sectors per head else
it is adjusted accordingly. To vary the size, you may either use the -t option or specify the total amount of Kbytes via -k option.
All files given behind the options will be copied onto the hdimage. In addition a DOSEMU suitable master boot record (MBR) is established
and via option -b you may specify a boot sector that gets inserted as first sector of the partition. To later access the hdimage outside of
DOSEMU you should use mtools (/etc/mtools.conf parameters partition=1 and offset=128).
OPTIONS
-b file
Insert the first 512 bytes of file into the bootsector of the partition.
-t num Make the virtual disk have num tracks. This is the one way to define the size of the disk.
-k Kbytes
Make the virtual disk be Kbytes in size. Using -t and -k are mutual exclusive.
-l label
insert label as volume label for the disk.
-f outfile
The hdimage is written to outfile instead of stdout
-p Pad the hdimage with zero up to the total size given by -t or -k (only in conjunction with -f).
AUTHOR
Pasi Eronen (pe@iki.fi) and Peter Wainwright.
BUGS
This program doesn't support name mangling and does very little checking for non-DOS filenames. Disk full condition isn't detected (and
probably causes erratic behaviour). Duplicate files aren't detected.
AVAILABILITY
Comes with DOSEMU
SEE ALSO
dosemu(1), xdosemu(1), mtools(1)
Version ALPHA 0.98 September, 1998 MKFATIMAGE16(1)