I have successfully installed RedHat 8.0 onto a Dell PowerEdge SC1425 today. This server has two SATA hard drives, and an IDE DVD-ROM drive.
Using the following kernel parameters, i successfully installed across both hard drives from CD:
ide0=0x1f0,0x3f6,14 vga=791 resolution=1024x768 expert... (5 Replies)
when I do a tape status /dev/rStp0 I get the following on a new tape and I have tried several:
Status : ready beginning-of-tape
soft errors : 0
hard errors: 2
underruns: 5
My BackupEdge has stopped backing up my system because it asks for a new volume yet my total system data is under 20... (5 Replies)
my shell script is simple arithmetic process.my addtion,substract and divide all can be worked only except multiplication.please help me.the shell is following:
#!/usr/bin/sh
echo "enter a number1:"
read number1
echo "enter an operator:"
read operator
echo "enter a number2:"
read number2... (4 Replies)
Hi,
On my X4200 Galaxy cluster, when i plugged out the both cables of Controller A (connected to Node 1 and Node2) , status of registered array became "Degraded".
After plugging -in the cables , i should get the status of array as "OK" but i am not getting the status OK.
I am using CAM... (2 Replies)
Hi Guru,
Where is the level to run clearfault command from M3000?
I only go XSCF and OS level and don't know how to get into this service level...
Need to clearfault for MBU_A as show the error like
* MBU_A Status:Degraded; Ver:0101h; Serial:PP095200RA ;
when I run showhardconf... (2 Replies)
Hi guys, I need to do a bit of work to a file.
Basically I want to run a SQL statement against each record in this file (hundreds of lines):
sample input:
233333
233334
233335
233336
I want to do the following:
1. Add a some text at the beginning to prepare the SQL (3 lines)
2. Add... (7 Replies)
Hi,
I've gone around with this on Oracle's site (and tech support) and ended up empty handed and without ideas of what to do to fix the problem.
Background:
V245, Solaris 10, has 2 12-disk infortrend RAIDs attached.
Have replaced faulty disks many times - familiar with the routine. However,... (5 Replies)
Hello there,
I am trying to get my head around the section below of a script we use that incorporates AWK and Regular Expressions.
{ match($0,"The broker*");print $1,$2,$3 ":", substr($0, RSTART,RLENGTH)}
I have a basic understanding of how match works, what I am struggling with is the... (2 Replies)
hello,
We are using Solaris 11.3 on SPARC T5-2. The below is the actual output from "zpool status" command. The disks were scrubed last week, but it says the scrub repaired on Dec 31, 1969.
Does anyone know how to correct this to report the correct date?
Thanks
pool: rpool
state:... (5 Replies)
Hi,
I am trying to extract line number (first number), as well as everything from TSVal onwards.
4 1.474005 172.18.124.142 -> 74.125.228.46 TCP 2450940617 74 44021 > https Seq=0 Win=5840 Len=0 MSS=1380 SACK_PERM=1 TSval=2450940617 TSecr=0 WS=64
6 1.488149 172.18.124.142 ->... (1 Reply)
Discussion started by: sand1234
1 Replies
LEARN ABOUT BSD
disktab
DISKTAB(5) File Formats Manual DISKTAB(5)NAME
disktab - disk description file
SYNOPSIS
#include <disktab.h>
DESCRIPTION
Disktab is a simple date base which describes disk geometries and disk partition characteristics. The format is patterned after the term-
cap(5) terminal data base. Entries in disktab consist of a number of `:' separated fields. The first entry for each disk gives the names
which are known for the disk, separated by `|' characters. The last name given should be a long name fully identifying the disk.
The following list indicates the normal values stored for each disk entry.
Name Type Description
ns num Number of sectors per track
nt num Number of tracks per cylinder
nc num Total number of cylinders on the disk
b0 str Filename of block zero primary bootstrap for device
ba num Block size for partition `a' (bytes)
bd num Block size for partition `d' (bytes)
be num Block size for partition `e' (bytes)
bf num Block size for partition `f' (bytes)
bg num Block size for partition `g' (bytes)
bh num Block size for partition `h' (bytes)
fa num Fragment size for partition `a' (bytes)
fd num Fragment size for partition `d' (bytes)
fe num Fragment size for partition `e' (bytes)
ff num Fragment size for partition `f' (bytes)
fg num Fragment size for partition `g' (bytes)
fh num Fragment size for partition `h' (bytes)
pa num Size of partition `a' in sectors
pb num Size of partition `b' in sectors
pc num Size of partition `c' in sectors
pd num Size of partition `d' in sectors
pe num Size of partition `e' in sectors
pf num Size of partition `f' in sectors
pg num Size of partition `g' in sectors
ph num Size of partition `h' in sectors
se num Sector size in bytes (default 512)
sf bool supports bad144-style bad sector forwarding
so bool partition offsets in sectors
ty str Type of disk (e.g. removable, winchester)
Disktab entries may be automatically generated with the diskpart program.
FILES
/etc/disktab
SEE ALSO newfs(8), diskpart(8), getdiskbyname(3)BUGS
This file shouldn't exist, the information should be stored on each disk pack.
4.2 Berkeley Distribution May 17, 1986 DISKTAB(5)