I would like to upgrade the memory in my Sun Blade 150 workstation. In reading through Sun's Blade 150 DIMM Installation Guide, it indicates that the memory must be "certified by Sun for the Sun Blade 150 system."
Does anyone know if any SDRAM, PC133 • CL=2 • Unbuffered • ECC • 133MHz • 3.3V ... (2 Replies)
Hi, I am new to UNIX. I have a Sun Blade 150 worksation. I used a Dell monitor and Dell keyboard as input and output devices. However, workstation always told me that keyboard couldn't be found. I used Dell keyboard with USB and Dell keyboard with series connector. It all didn't work. Please help... (10 Replies)
I'm not familiar with this particular machine and it's baffling me. For those that are familar with the workstation, allow me to paint a picture. If you were looking down on the machine (open) you would see the main board and then a riser board. On the left side of the riser board are jacks... (1 Reply)
We had to replace a hard drive in one of our Sun Blade 150s, but now it hangs during the Jumpstart. It will show 1 or 2 Timeout for ARP/RARP messages and then start the spinning numbers. It always stops at 2ae00 and just hangs there.
We have 1 combined jumpstart server and it is also our NIS+... (5 Replies)
Hi,
I have a Solaris 8.0 BLADE 150 machine. I have an onboard graphics alongwith an addon XVR500 graphics card. Now, when I use the motherboard graphics, I am not able to login to the XWINDOWS terminal, instead it stays on the console.
But, if I insert the monitor cable to the XVR500 port,... (2 Replies)
I have recently re-installed Solaris 10 on a Sun Blade 150 followed by a patch set (10_Recommended) dated 2011.12.05.
I have just noticed /bin/sun now returns false, rather than true. See below.
$ uname -a
SunOS myblade1 5.10 Generic_147440-07 sun4u sparc SUNW,Sun-Blade-100
$ /bin/sparc &&... (1 Reply)
Hello,
Ive just aquired a blade 150 off ebay.Im new to suns and are having a problem getting it to boot off the cdrom.Openboot continuously tries to do a network boot and I cant enter any commands.Im using an average pc keyboard and it definetly works.Thanks for any help.:wall: (3 Replies)
Hi everybody,
I'm having big troubles in installing Solaris 8 on a Sun Blade 150.
Here are some system specs:
Sun Blade 150 (UltraSPARC-IIe 550MHz)
RAM: 256MB
OBP 4.10.6 2003/06/06 12:30
POST 2.0.1 2001/08/23 17:13
When I try to boot from Solaris 8 CD with boot cdrom or... (10 Replies)
hello
i have a forte gamma camera Philips device . and its a medical device. this medical device is came with sun blade 150 pc and pegasys is printed on the sun blade pc .the problem is when i switched the power on , the sun blade runs and a white screen appear with the information about the... (6 Replies)
Discussion started by: moh_abaloo
6 Replies
LEARN ABOUT DEBIAN
dtrace
DTRACE(1) General Commands Manual DTRACE(1)NAME
dtrace - Dtrace compatibile user application static probe generation tool.
SYNOPSIS
dtrace -s file [OPTIONS]
DESCRIPTION
The dtrace command converts probe descriptions defined in file.d into a probe header file via the -h option or a probe description file via
the -G option.
OPTIONS -h generate a systemtap header file.
-G generate a systemtap probe definition object file.
-o file
is the name of the output file. If the -G option is given then the output file will be called file.o; if the -h option is given
then the output file will be called file.h.
-C run the cpp preprocessor on the input file when the -h option is given.
-I file
give this include path to cpp when the -C option is given.
-k keep temporary files, for example the C language source for the -G option.
--types
generate probe argument typedef information when the -h option is given.
EXAMPLES
Systemtap is source compatible with dtrace user application static probe support. Given a file test.d containing:
provider sdt_probes
{
probe test_0 (int type);
probe test_1 (struct astruct node);
};
struct astruct {int a; int b;};
Then the command "dtrace -s test.d -G" will create the probe definition file test.o and the command "dtrace -s test.d -h" will create the
probe header file test.h Subsequently the application can define probes using
#include "test.h"
...
struct astruct s;
...
SDT_PROBES_TEST_0(value);
...
SDT_PROBES_TEST_1(s);
The application is linked with "test.o" when it is built.
SEE ALSO stap(1)stappaths(7)DTRACE(1)