Hi all,
I am working on Solaris 8 . Its default file system is UFS. My problem is regarding to the file system. I create two partition 1) / 1.2 Gb and 2) /home 4.5 GB
In root partition there were 76 Cylinder groups ,when I was traversing the Cylinder Groups I found that the length of one cylinder... (2 Replies)
When I issue a "df" command the columns of the output are not aligned.
QMN012:.../oracle> df -k
Filesystem 1024-blocks Free %Used Iused %Iused Mounted on
/dev/hd4 524288 439592 17% 5423 6% /
/dev/M121A_HOME 3080192 2343764 24% 7263 2%... (1 Reply)
Hiya people..
I was hoping some expert here would share with me some details as I like to make a "System Recovery Partition" on a external drive. I use my MacBookPro on the road all the time and in the past it's known to happen, and often it happens at the worst time.
So, my question is: ... (0 Replies)
Hi Sir,
i am new to openGL, i want to know how to draw cylinder using openGL code in C or C++..
And i have to insert bitmap images on cylinder..
How to do this .. please guide me ...
Thanking You in advance .. (0 Replies)
Hi,
I have tcp/ip client server programs which will communicate through reqest,reply c-structures.
As the sizeof(struct) may give different value between client and server programs, how do i align properly for boundary conditions.
Could anybody please give some suggestion.
Thanks in... (3 Replies)
I am trying to expand the root partition on Solaris 10. I can expand root partition using format/partition command, but usually increasing cylinders on partition is done on back end. In this case I would have to expand from the front end following the table below, meaning I would have to move the... (12 Replies)
Heyas
I havent found a thread to introduce, so i combine it with the issue i have.
EDIT /* Removed Problem because solved */
My first contact with Linux was back in 1995 with slackware, beeing a gamer back then, i (sadly) didnt bother to dig deeper.
I finaly joined the Linux community in... (0 Replies)
Hi all,
I am trying to get below information from linux machine, could you please assist me to get this information using a command(s) or small script:
SectorsPerTrack
TotalCylinders
TotalHeads
TotalTracks
TracksPerCylinder
i am aware of fdisk -l command but the information provided by... (1 Reply)
Discussion started by: omkar.jadhav
1 Replies
LEARN ABOUT OPENSOLARIS
prtvtoc
prtvtoc(1M) System Administration Commands prtvtoc(1M)NAME
prtvtoc - report information about a disk geometry and partitioning
SYNOPSIS
prtvtoc [-fhs] [-t vfstab] [-m mnttab] device
DESCRIPTION
The prtvtoc command allows the contents of the label to be viewed. The command can be used only by the super-user.
The device name can be the file name of a raw device in the form of /dev/rdsk/c?t?d?s2 or can be the file name of a block device in the
form of /dev/dsk/c?t?d?s2.
OPTIONS
The following options are supported:
-f Report on the disk free space, including the starting block address of the free space, number of blocks, and unused parti-
tions.
-h Omit the headers from the normal output.
-m mnttab Use mnttab as the list of mounted filesystems, in place of /etc/mnttab.
-s Omit all headers but the column header from the normal output.
-t vfstab Use vfstab as the list of filesystem defaults, in place of /etc/vfstab.
EXAMPLES
Example 1 Using the prtvtoc Command
The following example uses the prtvtoc command on a 424-megabyte hard disk:
example# prtvtoc /dev/rdsk/c0t3d0s2
* /dev/rdsk/c0t3d0s2 partition map
*
* Dimension:
* 512 bytes/sector
* 80 sectors/track
* 9 tracks/cylinder
* 720 sectors/cylinder
* 2500 cylinders
* 1151 accessible cylinders
*
* Flags:
* 1: unmountable
* 10: read-only
* * First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 0 76320 76319 /
1 3 01 76320 132480 208799
2 5 00 0 828720 828719
5 6 00 208800 131760 340559 /opt
6 4 00 340560 447120 787679 /usr
7 8 00 787680 41040 828719 /export/home
example#
The data in the Tag column above indicates the type of partition, as follows:
Name Number
UNASSIGNED 0x00
BOOT 0x01
ROOT 0x02
SWAP 0x03
USR 0x04
BACKUP 0x05
STAND 0x06
VAR 0x07
HOME 0x08
ALTSCTR 0x09
CACHE 0x0a
RESERVED 0x0b
The data in the Flags column above indicates how the partition is to be mounted, as follows:
Name Number
MOUNTABLE, READ AND WRITE 0x00
NOT MOUNTABLE 0x01
MOUNTABLE, READ ONLY 0x10
Example 2 Using the prtvtoc Command with the -f Option
The following example uses the prtvtoc command with the -f option on a 424-megabyte hard disk:
example# prtvtoc -f /dev/rdsk/c0t3d0s2
FREE_START=0 FREE_SIZE=0 FREE_COUNT=0 FREE_PART=34
Example 3 Using the prtvtoc Command on a Disk Over One Terabyte
The following example uses uses the prtvtoc command on a disk over one terabyte:.
example# prtvtoc /dev/rdsk/c1t1d0s2
* /dev/rdsk/c1t1d0s2 partition map
*
* Dimensions:
* 512 bytes/sector
* 3187630080 sectors
* 3187630013 accessible sectors
*
* Flags:
* 1: unmountable
* 10: read-only
*
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 34 262144 262177
1 3 01 262178 262144 524321
6 4 00 524322 3187089340 3187613661
8 11 00 3187613662 16384 318763004
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO devinfo(1M), fmthard(1M), format(1M), mount(1M), attributes(5)WARNINGS
The mount command does not check the "not mountable" bit.
SunOS 5.11 25 Jul 2002 prtvtoc(1M)