Sponsored Content
Operating Systems AIX Increase LUN size in AIX with VIOS and HACMP Post 302606619 by johnf on Monday 12th of March 2012 09:23:47 AM
Old 03-12-2012
Exactly

Quote:
Originally Posted by enzote
The disk are in concurrent mode. If a run lspv from one node I got:

# lspv
...
hdisk3 00f6317b414624c2 vg_data concurrent
hdisk4 00f6317b41466700 vg_data concurrent
...

I tried export/import.

The disks are mapped through VSCSI.

I will make a test, unmapping the disks, running cfgdev on VIOS and then remapping them.

Thanks!

Enzote

---------- Post updated at 09:41 AM ---------- Previous update was at 08:12 AM ----------

Hello!

This procedure works:

1.- Stop PowerHA services in both nodes.

2.- In VIOS A:
$ rmdev -dev vtd_data_A
$ rmdev -dev vtd_data_B
$ r oem
# rmdev -dl hdisk1
# rmdev -dl hdisk2
# cfgmgr
# chdev -l hdisk1 -a reserve_policy=no_reserve
# chdev -l hdisk2 -a reserve_policy=no_reserve
# exit
$ mkvdev -vdev hdisk1 -vadaper vhost0 -dev vtd_data_A
$ mkvdev -vdev hdisk2 -vadaper vhost0 -dev vtd_data_B


3.- Repeat step 2 en VIOS B.

4.- On node A:
# rmdev -dl hdisk3
# rmdev -dl hdisk4
# cfgmgr
# chdev -l hdisk3 -a reserve_policy=no_reserve
# chdev -l hdisk4 -a reserve_policy=no_reserve
# chdev -l hdisk3 -a queue_depth=10
# chdev -l hdisk4 -a queue_depth=10
# varyonvg vg_data
0516-1434 varyonvg: Following physical volumes appear to be grown in size.
Run chvg command to activate the new space.
hdisk3 hdisk4
# chvg -g vg_data
# varyoffvg vg_data

5.- Repeat step 4 on node B, except chvg -g.


Thanks for the support!

Enzote
This is why I asked if they were mapped as VSCSI as the new disks needed re-mapping.
 

10 More Discussions You Might Find Interesting

1. HP-UX

increase size

Hi All, one of the mount point in Hp ux server has reached 95% its a data base file and can not be deleted. so i want to know how to increase the size of mount point i am new to unix ,please help me (1 Reply)
Discussion started by: jyoti
1 Replies

2. AIX

HACMP LV size is not reflecting

Hi i increased the lv size using smit hacmp. but, the new size is not reflecting.. why?. the pp size is 512 MB. before it was 4 PP's. i increased to 10 PP's. when i type df -m /xxx.. it is showing 2GB only. see the info below.. root@db:/ > df -m /xxx/xxx Filesystem MB blocks Free... (2 Replies)
Discussion started by: honeym210
2 Replies

3. AIX

Problem mapping LUN disk from VIOS to the LPAR

Hello guys, It would be so nice of you if someone can provide me with these informations. 1) My SAN group assigned 51G of LUN space to the VIO server.I ran cfgdev to discover the newly added LUN. Unfortunately most of the disks that are in VIO server is 51G. How would I know which is the newly... (3 Replies)
Discussion started by: solaix14
3 Replies

4. UNIX for Dummies Questions & Answers

Increase salt size

Unix protect its password by using salt It that mean larger the salt size the more secure? if the salt size increase greatly, will the password still able to be cracked? thank you for helping (1 Reply)
Discussion started by: cryogen
1 Replies

5. Solaris

Largest LUN size in Solaris 10

What is the largest possible LUN size that can be presented to Solaris 10. I've been googling a lot about this. The new EFI lablels (an alternative to VTOC) supports LUNs greater than 2TB. I need to know the upper limit. please help me find it. (4 Replies)
Discussion started by: pingmeback
4 Replies

6. AIX

How to increase the filesystem size in HACMP

How to increase the filesystem size in HACMP. what is the difference between normal chfs command and increase the filesystem size in HACMP. (4 Replies)
Discussion started by: AIXlearner
4 Replies

7. UNIX for Dummies Questions & Answers

Increase size to sd[b-c]

hi guys I am working on my vmware workstation. I have a /dev/sdb which is 5GB. I am using LVM. Now I increase /dev/sdb 2 more GB. fdisk -l shows 7 GB but pvscan still shows 5GB. how do I make my system recognize the new 7GB added and be able to add those to my physical volumen and... (1 Reply)
Discussion started by: kopper
1 Replies

8. AIX

PowerHA HACMP on VIOS servers

Few questions regarding Power HA ( previously known as HACMP) and VIOS POWERVM IVM ( IBM Virtualization I/O Server ) Is it possible to create HACMP cluster between two VIOS servers Physical Machine_1 VIOS_SERVER_1 LPAR_1 SHARED_DISK_XX VIOS_SERVER_2 Physical Machine_2 LPAR_2... (6 Replies)
Discussion started by: filosophizer
6 Replies

9. AIX

Uniform LUN size

Hi, Is there any advantage is making all my storage LUNS ( hdisk ) of uniform size. Currently the LUN's are having different size () eg: 50G / 60G / 75G etc ). I am planning for a storage migration....so should i go for uniform lun size or with current LUN size pattern ? Regards, jibu (3 Replies)
Discussion started by: jibujacob
3 Replies

10. AIX

Increase filesystem size AIX 5.3

I an trying to increase the file size on an AIX 5.3 box. I think i am missing the correct syntax for the command. Here is was i am trying on a test box # lsvg rootvg VOLUME GROUP: rootvg VG IDENTIFIER: 0000bd8b00004c00000 0010d8ed7a76e VG STATE: active ... (3 Replies)
Discussion started by: fierfek
3 Replies
disks(1M)						  System Administration Commands						 disks(1M)

NAME
disks - creates /dev entries for hard disks attached to the system SYNOPSIS
/usr/sbin/disks [-C] [-r rootdir] DESCRIPTION
devfsadm(1M) is now the preferred command for /dev and should be used instead of disks. disks creates symbolic links in the /dev/dsk and /dev/rdsk directories pointing to the actual disk device special files under the /devices directory tree. It performs the following steps: 1. disks searches the kernel device tree to see what hard disks are attached to the system. It notes the /devices pathnames for the slices on the drive and determines the physical component of the corresponding /dev/dsk or /dev/rdsk name. 2. The /dev/dsk and /dev/rdsk directories are checked for disk entries - that is, symbolic links with names of the form cN[tN]dNsN, or cN[tN]dNpN, where N represents a decimal number. cN is the logical controller number, an arbitrary number assigned by this program to designate a particular disk controller. The first controller found on the first occasion this program is run on a system, is assigned number 0. tN is the bus-address number of a subsidiary controller attached to a peripheral bus such as SCSI or IPI (the target number for SCSI, and the facility number for IPI controllers). dN is the number of the disk attached to the controller. sN is the slice number on the disk. pN is the FDISK partition number used by fdisk(1M). (x86 Only) 3. If only some of the disk entries are found in /dev/dsk for a disk that has been found under the /devices directory tree, disks creates the missing symbolic links. If none of the entries for a particular disk are found in /dev/dsk, disks checks to see if any entries exist for other disks attached to the same controller, and if so, creates new entries using the same controller number as used for other disks on the same controller. If no other /dev/dsk entries are found for slices of disks belonging to the same physical con- troller as the current disk, disks assigns the lowest-unused controller number and creates entries for the disk slices using this newly-assigned controller number. disks is run automatically each time a reconfiguration-boot is performed or when add_drv(1M) is executed. When invoking disks(1M) manually, first run drvconfig(1M) to ensure /devices is consistent with the current device configuration. Notice to Driver Writers disks considers all devices with a node type of DDI_NT_BLOCK, DDI_NT_BLOCK_CHAN, DDI_NT_CD, DDI_NT_BLOCK_WWN or DDI_NT_CD_CHAN to be disk devices. disks(1M) requires the minor name of disk devices obey the following format conventions. The minor name for block interfaces consists of a single lowercase ASCII character, a through u. The minor name for character (raw) inter- faces consists of a single lowercase ASCII character, a through u, followed by ,raw. disks translates a through p to s0 through s15, while it translates q through u to p0 through p4. SPARC drivers should only use the first 8 slices: a through h, while x86 drivers can use a through u, with q through u corresponding to fdisk(1M) partitions. q represents the entire disk, while r, s, t, and u represent up to 4 additional partitions. To prevent disks from attempting to automatically generate links for a device, drivers must specify a private node type and refrain from using a node type: DDI_NT_BLOCK, DDI_NT_BLOCK_CHAN, DDI_NT_CD, or DDI_NT_CD_CHAN when calling ddi_create_minor_node(9F). OPTIONS
The following options are supported: -C Causes disks to remove any invalid links after adding any new entries to /dev/dsk and /dev/rdsk. Invalid links are links which refer to non-existent disk nodes that have been removed, powered off, or are otherwise inaccessible. -r rootdir Causes disks to presume that the /dev/dsk, /dev/rdsk and /devices directory trees are found under rootdir, not directly under /. ERRORS
If disks finds entries of a particular logical controller linked to different physical controllers, it prints an error message and exits without making any changes to the /dev directory, since it cannot determine which of the two alternative logical-to-physical mappings is correct. The links should be manually corrected or removed before another reconfiguration-boot is performed. EXAMPLES
Example 1: Creating Block and Character Minor Devices The following example demonstrates creating the block and character minor devices from within the xkdisk driver's attach(9E) function. #include <sys/dkio.h> /* * Create the minor number by combining the instance number * with the slice number. */ #define MINOR_NUM(i, s) ((i) << 4 | (s)) int xkdiskattach(dev_info_t *dip, ddi_attach_cmd_t cmd) { int instance, slice; char name[8]; /* other stuff in attach... */ instance = ddi_get_instance(dip); for (slice = 0; slice < V_NUMPAR; slice++) { /* * create block device interface */ sprintf(name, "%c", slice + 'a'); ddi_create_minor_node(dip, name, S_IFBLK, MINOR_NUM(instance, slice), DDI_NT_BLOCK_CHAN, 0); /* * create the raw (character) device interface */ sprintf(name,"%c,raw", slice + 'a'); ddi_create_minor_node(dip, name, S_IFCHR, MINOR_NUM(instance, slice), DDI_NT_BLOCK_CHAN, 0); } } Installing the xkdisk disk driver on a Sun Fire 4800, with the driver controlling a SCSI disk (target 3 attached to an isp(7D) SCSI HBA) and performing a reconfiguration-boot (causing disks to be run) creates the following special files in /devices. # ls -l /devices/ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo@4/ brw-r----- 1 root sys 32, 16 Aug 29 00:02 xkdisk@3,0:a crw-r----- 1 root sys 32, 16 Aug 29 00:02 xkdisk@3,0:a,raw brw-r----- 1 root sys 32, 17 Aug 29 00:02 xkdisk@3,0:b crw-r----- 1 root sys 32, 17 Aug 29 00:02 xkdisk@3,0:b,raw brw-r----- 1 root sys 32, 18 Aug 29 00:02 xkdisk@3,0:c crw-r----- 1 root sys 32, 18 Aug 29 00:02 xkdisk@3,0:c,raw brw-r----- 1 root sys 32, 19 Aug 29 00:02 xkdisk@3,0:d crw-r----- 1 root sys 32, 19 Aug 29 00:02 xkdisk@3,0:d,raw brw-r----- 1 root sys 32, 20 Aug 29 00:02 xkdisk@3,0:e crw-r----- 1 root sys 32, 20 Aug 29 00:02 xkdisk@3,0:e,raw brw-r----- 1 root sys 32, 21 Aug 29 00:02 xkdisk@3,0:f crw-r----- 1 root sys 32, 21 Aug 29 00:02 xkdisk@3,0:f,raw brw-r----- 1 root sys 32, 22 Aug 29 00:02 xkdisk@3,0:g crw-r----- 1 root sys 32, 22 Aug 29 00:02 xkdisk@3,0:g,raw brw-r----- 1 root sys 32, 23 Aug 29 00:02 xkdisk@3,0:h crw-r----- 1 root sys 32, 23 Aug 29 00:02 xkdisk@3,0:h,raw /dev/dsk will contain the disk entries to the block device nodes in /devices # ls -l /dev/dsk /dev/dsk/c0t3d0s0 -> ../../devices/[...]/xkdisk@3,0:a /dev/dsk/c0t3d0s1 -> ../../devices/[...]/xkdisk@3,0:b /dev/dsk/c0t3d0s2 -> ../../devices/[...]/xkdisk@3,0:c /dev/dsk/c0t3d0s3 -> ../../devices/[...]/xkdisk@3,0:d /dev/dsk/c0t3d0s4 -> ../../devices/[...]/xkdisk@3,0:e /dev/dsk/c0t3d0s5 -> ../../devices/[...]/xkdisk@3,0:f /dev/dsk/c0t3d0s6 -> ../../devices/[...]/xkdisk@3,0:g /dev/dsk/c0t3d0s7 -> ../../devices/[...]/xkdisk@3,0:h and /dev/rdsk will contain the disk entries for the character device nodes in /devices # ls -l /dev/rdsk /dev/rdsk/c0t3d0s0 -> ../../devices/[...]/xkdisk@3,0:a,raw /dev/rdsk/c0t3d0s1 -> ../../devices/[...]/xkdisk@3,0:b,raw /dev/rdsk/c0t3d0s2 -> ../../devices/[...]/xkdisk@3,0:c,raw /dev/rdsk/c0t3d0s3 -> ../../devices/[...]/xkdisk@3,0:d,raw /dev/rdsk/c0t3d0s4 -> ../../devices/[...]/xkdisk@3,0:e,raw /dev/rdsk/c0t3d0s5 -> ../../devices/[...]/xkdisk@3,0:f,raw /dev/rdsk/c0t3d0s6 -> ../../devices/[...]/xkdisk@3,0:g,raw /dev/rdsk/c0t3d0s7 -> ../../devices/[...]/xkdisk@3,0:h,raw FILES
/dev/dsk/* Disk entries (block device interface) /dev/rdsk/* Disk entries (character device interface) /devices/* Device special files (minor device nodes) ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ SEE ALSO
add_drv(1M), devfsadm(1M), fdisk(1M), attributes(5), isp(7D), devfs(7FS), dkio(7I), attach(9E), ddi_create_minor_node(9F) Writing Device Drivers BUGS
disks silently ignores malformed minor device names. SunOS 5.10 7 Nov 2002 disks(1M)
All times are GMT -4. The time now is 11:27 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy