I have a T5220 with following configuration of hypervisor and OS
I have one Ldom configured on the system and vdisks (ZFS, VxVM & ISO image ) assigned to it but the LDom give me following error and does not boot from any of the assgined disk
I have a Netra T5220 Solaris 10 server with LDoms installed and enabled. RAID1 is enabled in the control domain with the following slices:
d50 -m d51 d52 1
d51 1 1 c1t0d0s5
d52 1 1 c1t1d0s5
d10 -m d11 d12 1
d11 1 1 c1t0d0s0
d12 1 1 c1t1d0s0
d20 -m d21 d22 1
d21 1 1 c1t0d0s1
d22 1 1... (14 Replies)
We're just about to migrate a large application from an Enterprise 6900 to a pair of T5220s utilising LDOMs. Does anyone have any experience of LDOMs on this kit and can provide any recommendations or pitfalls to avoid?
I've heard that use of LDOMs can have an impact on I/O speeds as it's all... (9 Replies)
I've got Sun Fire T2000 with two LDoms - primary and ldom1, both being Solaris 10 u8. Both can be accessed over the network (ssh, ping), both can access the network, but they can't ping or ssh to each other.
I only use e1000g0 interface on T2000, the primary ldom has an address on it, ldm has a... (1 Reply)
Can any one tell me how to add a virtual disk from NFS share in Ldom .. i have one share /VMshare/boot.img file shared/exported from one server but i do now know how to add nfs based vdsdev as it gives primary domain cannot validate the disk. (1 Reply)
We are having a discussion on what order LDOMS and control domains should be booted.
I think it should be LDOMS first then Control. Can anyone tell me why I am wrong or why I am right.
Thanks,
:confused: (6 Replies)
I have a T4-1 with Solaris 11.1, LDom ver 3.0.0.1 and I'm encountering two problems with zones.
I'd greatly appreciate help on these, especially the first one.
I have created multiple guest LDoms, all Solaris 11.1, and they all work fine.
The first problem is that I can not boot any... (9 Replies)
If I do ldm ls l ldom1 the memory block is as follows:-
MEMORY
RA PA SIZE
0x20000000 0x20000000 64G
0x1420000000 0x1020000000 16G
0x1c20000000 0x1420000000 16G
0x2420000000 0x1820000000 16G
0x2c20000000... (1 Reply)
System: SPARC S7-2 Server; 2x8-core CPUs; 128Gb RAM; 2x600Gb HDD.
I have been experimenting on the above system, using ldmp2v to create "clones" of my physical systems as LDoms on the server when there was an unscheduled power outage. After the system came back up I had lost my LDoms, although... (7 Replies)
Hi,
I have a task of creating a UFS filesystem in an LDOM. It is located in a hypervisor (CDOM).
The storage has been provisioned to the CDOM. How do I make it reflect to the LDOM, and then from there configure/set up the filesystem in the LDOM?
Please help. (1 Reply)
Discussion started by: anaigini45
1 Replies
LEARN ABOUT DEBIAN
ldminfod
ldminfod(8)ldminfod(8)NAME
ldminfod -- output login sessions and available locales
SYNOPSIS
ldminfod
DESCRIPTION
ldminfod will output the login sessions and locales available. it is usually run from an inetd(8) instance. it is used by ldm(1) to
remotely determine available login and locale settings.
EXAMPLE
add the following lines to /etc/inetd.conf(5):
9571 stream tcp nowait nobody /usr/sbin/tcpd /usr/sbin/ldminfod
SEE ALSO ldm(1), inetd(8), inetd.conf(5).
AVAILABILITY
ldminfod is part of ldm package and the latest versions are available in source form from https://launchpad.net/products/ltsp.
MAN PAGE AUTHOR
copyright 2006-2009 Vagrant Cascadian <vagrant@freegeek.org>, distributed under the terms of the GNU General Public License version 2 or
any later version.
Vagrant Cascadian 20090515 ldminfod(8)