kenel panic not syncing Post: 302605290

Sponsored Content

Operating Systems Linux Ubuntu kenel panic not syncing Post 302605290 by dr_mabuse on Wednesday 7th of March 2012 07:00:04 AM

03-07-2012

Registered User

new kernel comile, root file system fails to mount

well, thanks for the reply. I checked /dev/disk/by-uuid, you know, ../../dev/sda1 is the only device in this directory.
you know, my guess is that i probably don't select some particular modules required to load the root filesystem. Because I tested the new kernel on 32 bit, 64 bit and even another distribution of linux, and I have the same problem everywhere.

Let's be more accurate. when I choose my customized kernel, first it said :

Code:

Booting a command list 
alloc magic is broken at 0x3f503710 
Aborted. Press any key to exit.

when i edited the boot with all_generic_ide and root=dev/sda1
it output some other things, I got a shot of the screen which is attached.
I would
thank if you help me fix the problem.

the attached file is mykernel .config customized with make menuconfig
more info:

Code:

processor    : 0
vendor_id    : GenuineIntel
cpu family    : 6
model        : 13
model name    : Intel(R) Pentium(R) M processor 1.40GHz
stepping    : 8
cpu MHz        : 600.000
cache size    : 2048 KB
fdiv_bug    : no
hlt_bug        : no
f00f_bug    : no
coma_bug    : no
fpu        : yes
fpu_exception    : yes
cpuid level    : 2
wp        : yes
flags        : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx up bts est tm2
bogomips    : 1198.00
clflush size    : 64
cache_alignment    : 64
address sizes    : 32 bits physical, 32 bits virtual
power management:

dr_mabuse

View Public Profile for dr_mabuse

Find all posts by dr_mabuse

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

filesystem syncing

Does anyone know if there is free software that can keep 2 filesystem on remote machines , synced. This will be part of our Disaster Recovery to keep one machine off site , which will take over should the need arise.. Thanks

2. Linux

NTPD seems to be not syncing !!!

Hi Linux Admin Guys My onsite server is always 15 min slow and seems like NTPD (Network Time Protocol (NTP) daemon) not running properly. can anyone suggest me how to rectify this problem? we can't seem to get NTP to properly sync the clock. Any help is resolving the issue will be helpful....

3. UNIX for Dummies Questions & Answers

Kernel panic - not syncing == While RHEL AS install

I am trying to Install RHEL AS 4 on x86 pc, through VNC and got the below error, Am not pretty sure as how to resolve this. Can some one guide me through the process, or what might be missing.... Have Installed RHEL, many a times but cudnt find this out... Wud appreciate an early reply .........

4. Linux

Kernel panic - not syncing: cannot execute a PAE-enabled kernel on PAE-less CPU

ok so I just installed fedora core 6 on my dell inspiron 700m and I go to boot into linux and I get this error. Has anyone seen this before? I also had XP Pro and Vista installed on this pc prior to putting fedora core 6 on the machine. I'm trying to setup a triple boot system. Please Help...

5. UNIX Desktop Questions & Answers

kernel panic-not syncing:fatal exception while booting

Hi ALL, I am getting error.. kernal panic-not syncing:fatal exception while booting. Please help me.. Thanks Jack

6. Filesystems, Disks and Memory

RAID syncing 2 partitions

Hi all, I tried setting up RAID between 2 partitions and it was success. If I write some things on /dev/md0, both partition got affected. Then I stop the RAID, and I mounted one of my partition and I created a file in it. Now I started the RAID (mdadm --assemble --scan) What I expected...

7. Slackware

Help with kernel panic - not syncing slackware 13.0

Hi, first of all I'm 110% newbie, sorry for any mistake if I made it. In my country there are no normal or active linux forums, so i found this forum. Ok, that's for begining, but not for may real problem. --------------------------------------------------- I am system administrator...

8. Red Hat

Error: kernal panic not syncing

HI All, server stopped here, we are suspecting server crash, need install new OS. Any suggestions on this. kindly help to us. Thanks Rajesh

9. Red Hat

Kernel panic-not syncing

dear experts linux i am using RHEL 5.5 run on a physical server. i am front of a big trouble, the Rhel can't run correctly , it show me this error message in black screen: reading all physical volumes. this my take a while .. found volume group "VolGroup00" using metadata type lvm2 9...

LEARN ABOUT DEBIAN

check-symbols

CHECK-SYMBOLS(1)					      General Commands Manual						  CHECK-SYMBOLS(1)

NAME

       check-symbols - verify symbols exported by a new library version

SYNOPSIS

       check-symbols <source-package> [DEBDIR]

DESCRIPTION

       To  verify the symbols exported by a new library version, run check-symbols with the name of the source package as argument.  check-symbols
       will first determine the symbols exported by the existing and installed library version, then install the new library and compare the  sym-
       bols  exported  by the new library version with the symbols exported by the old version.  For each of the symbols found, check-symbols will
       list if the symbol is new, unchanged or has been removed in the new library version.

       In case the source package contains multiple binary library packages, all library files in each of the binary packages will be verified.

       check-symbols uses nm -D to determine the exported symbols of the libraries.

       If no value is given for DEBDIR, the script will assume the new library deb files are stored in /var/cache/pbuilder/result.

EXAMPLES

       check-symbols telepathy-glib .

       This will:

	 o Use nm -D to determine the exported symbols of the old,
	   installed versions of the libraries provided by telepathy-glib.

	 o Install the binary libraries provided by the new version of
	   telepathy-glib.

	 o Compare the output of nm -D of the new libraries with the
	   output of the old version.

	 o List the result in diff format.

BUGS

       Please report bugs on:
       https://bugs.launchpad.net/ubuntu/+source/ubuntu-dev-tools/

SEE ALSO

       nm(1)

AUTHOR

       check-symbols was written by Daniel Holbach <daniel.holbach@ubuntu.com> and this manpage by Albert Damen <albrt@gmx.net>. Both are licensed
       under the GNU General Public License, version 2.

ubuntu-dev-tools						 December 9, 2007						  CHECK-SYMBOLS(1)