03-05-2012
Right when you see the "1=SMS Menu, 5 = Default Boot List...", press "F1", not "1". Keep tapping it a few times - that is what I do. You should then be able to navigate those menus and select the appropriate boot disk.
10 More Discussions You Might Find Interesting
1. AIX
We just got a machine with pre installed AIX 4.3.3.
It's and oldish RS/6000 F80.
When I power it on, the boot sequence advances finely, until it says
Welcome to AIX, closing stdin and stdout, or something like that.
From that point on the diagnostic display keeps counting the usual way for... (3 Replies)
Discussion started by: osee
3 Replies
2. AIX
Hi guys,
Got a tiny bit of a problem on one of our servers here at work. I installed AIX 5.3 on the server and that went fine. Then I upgraded to ML 5300-05-01, but now the system just hangs on boot.
The system starts up and the monitor comes on in few minutes, but a few seconds later when... (6 Replies)
Discussion started by: drchris
6 Replies
3. AIX
To All:
I have this AIX machine (see boot process below). The problem was it hangs at:
The ctrmc Subsystem has been started. Subsystem PID is 11906..
I checked with other forums but their advise were just "strong punches in the air" with no specific explanation.
I really appreciate if... (6 Replies)
Discussion started by: aix_xia
6 Replies
4. AIX
IBM P Series #7026
Error Codes
#E47E212E - init
#1BA70F4E - SRC
#BA431EB7 - SRC
#C69F5C9B- SYSPROC
#369DO49B - SYSPFS
This happens on reboot the core dump fills up the root file system so I don't think it completes the dump. I can't read the core file with dbx.
Thanks (6 Replies)
Discussion started by: tholmes
6 Replies
5. AIX
Hello Experts,
I'm trying to boot my AIX server via network using another AIX as a boot server. I use tcpdump to monitor the process. After my boot client received .info file and mounted nfs resource (checked by 'showmount -a' from boot server) it hung. I noticed a lot of following entries:
... (0 Replies)
Discussion started by: jarekkk
0 Replies
6. AIX
We have a RS6000, model B50, type 7046, where I installed AIX 4.3.3
But, if the power goes off, the operating system does not restart,
and I have to go there and push the button to start AIX again.
Is there any way this procedure to be avoided,
this is, I want the AIX to start automatically... (9 Replies)
Discussion started by: sebastia.net
9 Replies
7. AIX
Hi, can someone point me to the bootup file where I can add a samba start up script so I dont have to manually start samba everytime we reboot the server? Thanks. (8 Replies)
Discussion started by: NycUnxer
8 Replies
8. AIX
We are having a bit of trouble finding where the following process is being started from at bootup.
/opt/IBM/tdsV6.2db2/itma/aix526/ud/bin/kuddb2 db2tdsWe have looked in the typical areas /etc/inittab & /etc/rc.d but have had no luck finding it, any ideas? (10 Replies)
Discussion started by: j_aix
10 Replies
9. AIX
Hi all,
We have a old Power4 server with AIX version 5.3 installed. Upon boot up, it hangs right after the AIX welcome screen. On the diagnostic load progress LED indicator, I saw that it stopped at '0c32' then after awhile the LED would be blank. The screen on the monitor will hang at the black... (15 Replies)
Discussion started by: a_sim
15 Replies
10. AIX
haii guys,..
How make first boot at AIX 6.1 OS.
I Will all new install Aix.
How the Command make first boot and step by step new installation Aix 6.1 ?
have Idea :)?
regard
williamen (7 Replies)
Discussion started by: williamen
7 Replies
LEARN ABOUT OSX
installboot
installboot(1M) installboot(1M)
NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)
WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)