looks like I have to use iproute2 just don't know how
any guidance
thanks
---------- Post updated at 11:09 AM ---------- Previous update was at 12:45 AM ----------
guys
I am getting there
this does what I want
iproute2
sysctl parameters
but I need to make this changes permanent after reboot
where I should add them?
I already tried /etc/init.d/boot.local but no luck
hi all ;
I am using solaris 8 over SPARC .
i was given the role to administer a webmail server running Iplanet 4.2
i was told also that this server is running a website .
this server has 2 fake IPs .
My question is how i can know these fake IPs and how they are mapped .
cheers (2 Replies)
I am running HP_UX 11.23 with 4 NIC cards (this is our TSM server)
I have 4 subnets we are backing across. trying to keep traffic on their subnets. I only have one route statment should I add more.
route add net 123.99.8.0 netmask 255.255.255.0 123.99.8.254
route add net 123.99.67.0 netmask... (2 Replies)
Hi,
I have a server, which has more than of 1000 ip address, but only 500 ip address are responding in the Server. Here below the error message received while restarting the named
Sep 22 00:25:00 ns2 named: creating IPv4 interface eth0:595 failed;
interface ignored
Sep 22 00:25:00 ns2... (5 Replies)
I have 2 physical interfaces (bnx0 and bnx1) aggregated into aggr1. I need to assign second IP, and normally I know how to do it to physical interface (i.e. bnx0:1) however same trick (aggr1:1) is not working. Is there any way to do it? (0 Replies)
Hi everyone,
Hopefully there is someone here that can help me with the problem I got.
At my office I have 1 ubuntu firewall/gateway and several networks.
On the firewall/gateway I have three network cards, one for internet, one for network 192.168.100.0 and one for network 172.20.1.0
We... (0 Replies)
I have written perl ping program to ping list of IPs one by one and print the status.But each and every time it is showing the status as Pass for all IPs even though the IP is wrong.
multipleip.pl
use Net::Ping;
$p = Net::Ping->new();
$ifile="inventory.txt";
... (2 Replies)
Hi all. Linux noob here.
I was hoping someone could help me with configuring some routing rules on my router, an Asus AC68.
The router is connected to two gateways, wan0_gateway and wan1_gateway.
I have rules set up in the router gui that will push all traffic from every IP other than my own... (0 Replies)
Hello!
We have an AIX box (6.3), we are looking for a way to get list of logged in users and their IP. The issue we have is running who -ub shows hostname and we are wanting to get the ip. Any suggestions of ideas? Thanks in advance for any help! (4 Replies)
Hey there,
I am a network administrator of a student dorm. Me and my team (we do this in our spare time) have the task to upgrade and rebuild our dorm intern network. But unfortunately we don't have that much experience with server setup and ip-routing and stuff. So here is the topic I want to... (8 Replies)
I am rather new to shell scripting and currently taking a linux course.
Im having some troubles writing a loop to curl multiple ips in mutiple access logs to the site ipinfo.io and push the output to a text file for easy viewing and removing duplicates.
So far i have these simple lines
cat... (1 Reply)
Discussion started by: kjcraig77
1 Replies
LEARN ABOUT MINIX
tc-route
Route classifier in tc(8) Linux Route classifier in tc(8)NAME
route - route traffic control filter
SYNOPSIS
tc filter ... route [ from REALM | fromif TAG ] [ to REALM ] [ classid CLASSID ] [ action ACTION_SPEC ]
DESCRIPTION
Match packets based on routing table entries. This filter centers around the possibility to assign a realm to routing table entries. For
any packet to be classified by this filter, a routing table lookup is performed and the returned realm is used to decide on whether the
packet is a match or not.
OPTIONS
action ACTION_SPEC
Apply an action from the generic actions framework on matching packets.
classid CLASSID
Push matching packets into the class identified by CLASSID.
from REALM
fromif TAG
Perform source route lookups. TAG is the name of an interface which must be present on the system at the time of tc invocation.
to REALM
Match if normal (i.e., destination) routing returns the given REALM.
EXAMPLES
Consider the subnet 192.168.2.0/24 being attached to eth0:
ip route add 192.168.2.0/24 dev eth0 realm 2
The following route filter will then match packets from that subnet:
tc filter add ... route from 2 classid 1:2
and pass packets on to class 1:2.
NOTES
Due to implementation details, realm values must be in a range from 0 to 255, inclusive. Alternatively, a verbose name defined in
/etc/iproute2/rt_realms may be given instead.
SEE ALSO tc(8), ip-route(8)iproute2 21 Oct 2015 Route classifier in tc(8)