I installed a new kernel 3.0.22 on ubuntu server 11.04 32 bit.
when I select the kenel from boot loader it stops when
Code:
loading initial ramdisk...
I added all_generic_ide at the end of linux line and also added dev/sda1 to linux line: root=UUID=dev/sda1
now it says that
I have checked from the first kernel with df -h, it says that my main drive which is the root file system is /dev/sda1.
so! what's the problem?
Does anyone know if there is free software that can keep 2 filesystem on remote machines , synced.
This will be part of our Disaster Recovery to keep one machine off site , which will take over should the need arise..
Thanks (6 Replies)
Hi Linux Admin Guys
My onsite server is always 15 min slow and seems like NTPD (Network Time Protocol (NTP) daemon) not running properly. can anyone suggest me how to rectify this problem? we can't seem to get NTP to properly sync the clock.
Any help is resolving the issue will be helpful.... (12 Replies)
I am trying to Install RHEL AS 4 on x86 pc, through VNC and got the below error, Am not pretty sure as how to resolve this. Can some one guide me through the process, or what might be missing....
Have Installed RHEL, many a times but cudnt find this out...
Wud appreciate an early reply ......... (0 Replies)
ok so I just installed fedora core 6 on my dell inspiron 700m and I go to boot into linux and I get this error. Has anyone seen this before?
I also had XP Pro and Vista installed on this pc prior to putting fedora core 6 on the machine. I'm trying to setup a triple boot system.
Please Help... (2 Replies)
Hi all,
I tried setting up RAID between 2 partitions and it was success.
If I write some things on /dev/md0, both partition got affected.
Then I stop the RAID, and I mounted one of my partition and I created a file in it.
Now I started the RAID (mdadm --assemble --scan)
What I expected... (1 Reply)
Hi,
first of all I'm 110% newbie, sorry for any mistake if I made it.
In my country there are no normal or active linux forums, so i found this forum.
Ok, that's for begining, but not for may real problem.
---------------------------------------------------
I am system administrator... (4 Replies)
HI All,
server stopped here, we are suspecting server crash, need install new OS.
Any suggestions on this. kindly help to us.
Thanks
Rajesh (0 Replies)
dear experts linux
i am using RHEL 5.5 run on a physical server.
i am front of a big trouble, the Rhel can't run correctly , it show me this error message in black screen:
reading all physical volumes. this my take a while ..
found volume group "VolGroup00" using metadata type lvm2
9... (1 Reply)
Discussion started by: wassimpb
1 Replies
LEARN ABOUT DEBIAN
pvresize
PVRESIZE(8) System Manager's Manual PVRESIZE(8)NAME
pvresize - resize a disk or partition in use by LVM2
SYNOPSIS
pvresize [-d|--debug] [-h|--help] [-t|--test] [-v|--verbose] [--version] [--setphysicalvolumesize size] PhysicalVolume [PhysicalVolume...]
DESCRIPTION
pvresize resizes PhysicalVolume which may already be in a volume group and have active logical volumes allocated on it.
OPTIONS
See lvm(8) for common options.
--setphysicalvolumesize size
Overrides the automatically-detected size of the PV. Use with care, or prior to reducing the physical size of the device.
EXAMPLES
Expand the PV on /dev/sda1 after enlarging the partition with fdisk:
pvresize /dev/sda1
Shrink the PV on /dev/sda1 prior to shrinking the partition with fdisk (ensure that the PV size is appropriate for your intended new parti-
tion size):
pvresize --setphysicalvolumesize 40G /dev/sda1
RESTRICTIONS
pvresize will refuse to shrink PhysicalVolume if it has allocated extents after where its new end would be. In the future, it should relo-
cate these elsewhere in the volume group if there is sufficient free space, like pvmove does.
pvresize won't currently work correctly on LVM1 volumes or PVs with extra metadata areas.
SEE ALSO lvm(8), pvmove(8), lvresize(8), fdisk(8)Sistina Software UK LVM TOOLS 2.02.95(2) (2012-03-06) PVRESIZE(8)