GLLIGHT(3G)							   OpenGL Manual						       GLLIGHT(3G)

NAME

       glLight - set light source parameters

C SPECIFICATION

       void glLightf(GLenum light, GLenum pname, GLfloat param);

       void glLighti(GLenum light, GLenum pname, GLint param);

PARAMETERS

       light
	   Specifies a light. The number of lights depends on the implementation, but at least eight lights are supported. They are identified by
	   symbolic names of the form GL_LIGHTi, where i ranges from 0 to the value of GL_MAX_LIGHTS - 1.

       pname
	   Specifies a single-valued light source parameter for light.	GL_SPOT_EXPONENT, GL_SPOT_CUTOFF, GL_CONSTANT_ATTENUATION,
	   GL_LINEAR_ATTENUATION, and GL_QUADRATIC_ATTENUATION are accepted.

       param
	   Specifies the value that parameter pname of light source light will be set to.

C SPECIFICATION

       void glLightfv(GLenum light, GLenum pname, const GLfloat * params);

       void glLightiv(GLenum light, GLenum pname, const GLint * params);

PARAMETERS

       light
	   Specifies a light. The number of lights depends on the implementation, but at least eight lights are supported. They are identified by
	   symbolic names of the form GL_LIGHTi, where i ranges from 0 to the value of GL_MAX_LIGHTS - 1.

       pname
	   Specifies a light source parameter for light.  GL_AMBIENT, GL_DIFFUSE, GL_SPECULAR, GL_POSITION, GL_SPOT_CUTOFF, GL_SPOT_DIRECTION,
	   GL_SPOT_EXPONENT, GL_CONSTANT_ATTENUATION, GL_LINEAR_ATTENUATION, and GL_QUADRATIC_ATTENUATION are accepted.

       params
	   Specifies a pointer to the value or values that parameter pname of light source light will be set to.

DESCRIPTION

       glLight sets the values of individual light source parameters.  light names the light and is a symbolic name of the form GL_LIGHTi, where i
       ranges from 0 to the value of GL_MAX_LIGHTS - 1.  pname specifies one of ten light source parameters, again by symbolic name.  params is
       either a single value or a pointer to an array that contains the new values.

       To enable and disable lighting calculation, call glEnable() and glDisable() with argument GL_LIGHTING. Lighting is initially disabled. When
       it is enabled, light sources that are enabled contribute to the lighting calculation. Light source i is enabled and disabled using
       glEnable() and glDisable() with argument GL_LIGHTi.

       The ten light parameters are as follows:

       GL_AMBIENT
	   params contains four integer or floating-point values that specify the ambient RGBA intensity of the light. Integer values are mapped
	   linearly such that the most positive representable value maps to 1.0, and the most negative representable value maps to -1.0.
	   Floating-point values are mapped directly. Neither integer nor floating-point values are clamped. The initial ambient light intensity
	   is (0, 0, 0, 1).

       GL_DIFFUSE
	   params contains four integer or floating-point values that specify the diffuse RGBA intensity of the light. Integer values are mapped
	   linearly such that the most positive representable value maps to 1.0, and the most negative representable value maps to -1.0.
	   Floating-point values are mapped directly. Neither integer nor floating-point values are clamped. The initial value for GL_LIGHT0 is
	   (1, 1, 1, 1); for other lights, the initial value is (0, 0, 0, 1).

       GL_SPECULAR
	   params contains four integer or floating-point values that specify the specular RGBA intensity of the light. Integer values are mapped
	   linearly such that the most positive representable value maps to 1.0, and the most negative representable value maps to -1.0.
	   Floating-point values are mapped directly. Neither integer nor floating-point values are clamped. The initial value for GL_LIGHT0 is
	   (1, 1, 1, 1); for other lights, the initial value is (0, 0, 0, 1).

       GL_POSITION
	   params contains four integer or floating-point values that specify the position of the light in homogeneous object coordinates. Both
	   integer and floating-point values are mapped directly. Neither integer nor floating-point values are clamped.

	   The position is transformed by the modelview matrix when glLight is called (just as if it were a point), and it is stored in eye
	   coordinates. If the w component of the position is 0, the light is treated as a directional source. Diffuse and specular lighting
	   calculations take the light's direction, but not its actual position, into account, and attenuation is disabled. Otherwise, diffuse and
	   specular lighting calculations are based on the actual location of the light in eye coordinates, and attenuation is enabled. The
	   initial position is (0, 0, 1, 0); thus, the initial light source is directional, parallel to, and in the direction of the - z axis.

       GL_SPOT_DIRECTION
	   params contains three integer or floating-point values that specify the direction of the light in homogeneous object coordinates. Both
	   integer and floating-point values are mapped directly. Neither integer nor floating-point values are clamped.

	   The spot direction is transformed by the upper 3x3 of the modelview matrix when glLight is called, and it is stored in eye coordinates.
	   It is significant only when GL_SPOT_CUTOFF is not 180, which it is initially. The initial direction is 0 0 -1.

       GL_SPOT_EXPONENT
	   params is a single integer or floating-point value that specifies the intensity distribution of the light. Integer and floating-point
	   values are mapped directly. Only values in the range 0 128 are accepted.

	   Effective light intensity is attenuated by the cosine of the angle between the direction of the light and the direction from the light
	   to the vertex being lighted, raised to the power of the spot exponent. Thus, higher spot exponents result in a more focused light
	   source, regardless of the spot cutoff angle (see GL_SPOT_CUTOFF, next paragraph). The initial spot exponent is 0, resulting in uniform
	   light distribution.

       GL_SPOT_CUTOFF
	   params is a single integer or floating-point value that specifies the maximum spread angle of a light source. Integer and
	   floating-point values are mapped directly. Only values in the range 0 90 and the special value 180 are accepted. If the angle between
	   the direction of the light and the direction from the light to the vertex being lighted is greater than the spot cutoff angle, the
	   light is completely masked. Otherwise, its intensity is controlled by the spot exponent and the attenuation factors. The initial spot
	   cutoff is 180, resulting in uniform light distribution.

       GL_CONSTANT_ATTENUATION

       GL_LINEAR_ATTENUATION

       GL_QUADRATIC_ATTENUATION
	   params is a single integer or floating-point value that specifies one of the three light attenuation factors. Integer and
	   floating-point values are mapped directly. Only nonnegative values are accepted. If the light is positional, rather than directional,
	   its intensity is attenuated by the reciprocal of the sum of the constant factor, the linear factor times the distance between the light
	   and the vertex being lighted, and the quadratic factor times the square of the same distance. The initial attenuation factors are (1,
	   0, 0), resulting in no attenuation.

NOTES

       It is always the case that GL_LIGHTi = GL_LIGHT0 + i.

ERRORS

       GL_INVALID_ENUM is generated if either light or pname is not an accepted value.

       GL_INVALID_VALUE is generated if a spot exponent value is specified outside the range 0 128, or if spot cutoff is specified outside the
       range 0 90 (except for the special value 180), or if a negative attenuation factor is specified.

       GL_INVALID_OPERATION is generated if glLight is executed between the execution of glBegin() and the corresponding execution of glEnd().

ASSOCIATED GETS

       glGetLight()

       glIsEnabled() with argument GL_LIGHTING

SEE ALSO

       glColorMaterial(), glLightModel(), glMaterial()

COPYRIGHT

       Copyright (C) 1991-2006 Silicon Graphics, Inc. This document is licensed under the SGI Free Software B License. For details, see
       http://oss.sgi.com/projects/FreeB/.

AUTHORS

       opengl.org

opengl.org							    06/10/2014							       GLLIGHT(3G)