If you have the smbclient installed (part of samba.base), you can try to connect to the Windows share and at least verify that you are authenticating correctly.
Hi,
How can I mount a Windows share (over samba) on an AIX machine?
I know there is a utility called smbmount on Linux, but alas, I cannot find out how to the same thing on AIX.
anyone have any ideas?
thanks! (3 Replies)
Hi all,
I've got a system here in which I have put a hard drive that was previously mirrored in a supposedly identical system. I am now attempting to boot from this drive alone but get these messages:
---
ad4: 58644MB <Maxtor 6Y060L0> at ata2-master UDMA100
Mounting root from ufs:/dev/ar0a... (0 Replies)
Hi,
I have a Solaris 10 OS. I would like to map a network drive to a Windows machine. I have typed the following command
#mount 192.1.1.1:/content_dir /windows
192.1.1.1 - ip address of my windows box
content_dir - directory that I have shared out to others users on my windows box... (3 Replies)
Hi,
We are testing SCO6 for an upgrade.
We currently have a SCO5.0.4 system that mounts
a remote directory on a Windows 2000 server.
The windows server has 'services for unix' installed
to enable the required directory to be mounted on the SCO system.
On SCO we run '/etc/mount -v -f NFS... (2 Replies)
Hi
Can somebody help me know , How can i mount a USB drive in my AIX 5.3 ML6, P570 Server. This is a Bit urgent for me. Thanks in advance..
Regards
Raj (0 Replies)
Dear Experts,
My buissness requierment is to place some automated files in Windows server, Now Can you help me to map the Windows folder into Linux server.
Windows Details:-windows 2003
Linux Details:-
$ uname -a
Linux testdb.mawarid.local 2.6.9-55.ELsmp #1 SMP Fri Apr 20 16:36:54 EDT 2007... (3 Replies)
Hi,
The problem I have is I want to restore my AIX machine. I have created a mksysb tape from my tape drive rmt0 and I changed the bootlist using this command "bootlist -m normal rmt0 hdisk0".
However, when I display the bootlist "bootlist -om normal", it shows '-' hdisk0. I googled and... (2 Replies)
Hi,
How can we share a AIX drive on to Windows 2012 server. or vise versa.
Note: Not using NFS/CIFS/samba. (*we are not able to use samba/NFS/CIFS for some reason)
Requirement: How to have real time file sharing over the network between Windows and UNIX
Do you guys have any ... (4 Replies)
Discussion started by: System Admin 77
4 Replies
LEARN ABOUT MOJAVE
cupsaddsmb
cupsaddsmb(8) Apple Inc. cupsaddsmb(8)NAME
cupsaddsmb - export printers to samba for windows clients
SYNOPSIS
cupsaddsmb [ -H samba-server ] [ -U samba-user[%samba-password] ] [ -h cups-server[:port] ] [ -v ] -a
cupsaddsmb [ -H samba-server ] [ -U samba-user[%samba-password] ] [ -h cups-server[:port] ] [ -v ] printer [ ... printer ]
DESCRIPTION
The cupsaddsmb program exports printers to the SAMBA software (version 2.2.0 or higher) for use with Windows clients. Depending on the
SAMBA configuration, you may need to provide a password to export the printers. This program requires the Windows printer driver files
described below.
SAMBA CONFIGURATION
cupsaddsmb uses the RPC-based printing support in SAMBA to provide printer drivers and PPD files to Windows client machines. In order to
use this functionality, you must first configure the SAMBA smb.conf(5) file to support printing through CUPS and provide a printer driver
download share, as follows:
[global]
load printers = yes
printing = cups
printcap name = cups
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
public = yes
guest ok = yes
writable = no
printable = yes
[print$]
comment = Printer Drivers
path = /etc/samba/drivers
browseable = yes
guest ok = no
read only = yes
write list = root
This configuration assumes a FHS-compliant installation of SAMBA; adjust the [printers] and [print$] share paths accordingly on your system
as needed.
MICROSOFT POSTSCRIPT DRIVERS FOR WINDOWS
The base driver for Windows 2000 and higher is the Microsoft PostScript driver, which is available on any system running Windows 2000 or
higher in the %WINDIR%SYSTEM32SPOOLDRIVERSW32X863 folder for 32-bit drivers and %WINDIR%SYSTEM32SPOOLDRIVERSX643 folder for
64-bit drivers.
Copy the 32-bit drivers to the /usr/share/cups/drivers directory and the 64-bit drivers to the /usr/share/cups/drivers/x64 directory
exactly as named below:
ps5ui.dll
pscript.hlp
pscript.ntf
pscript5.dll
Note: Unlike Windows, case is significant - make sure that you use the lowercase filenames shown above, otherwise cupsaddsmb will fail to
export the drivers.
OPTIONS
cupsaddsmb supports the following options:
-H samba-server
Specifies the SAMBA server which defaults to the CUPS server.
-U samba-user[%samba-password]
Specifies the SAMBA print admin username which defaults to your current username. If the username contains a percent (%) character,
then the text following the percent is treated as the SAMBA password to use.
-a Exports all known printers. Otherwise only the named printers are exported.
-h cups-server[:port]
Specifies a different CUPS server to use.
-v Specifies that verbose information should be shown. This is useful for debugging SAMBA configuration problems.
SEE ALSO rpcclient(1), smbclient(1), smbd(8), smb.conf(5), CUPS Online Help (http://localhost:631/help)
COPYRIGHT
Copyright (C) 2007-2017 by Apple Inc.
11 June 2014 CUPS cupsaddsmb(8)