03-01-2012
WPAR and AIX
The latest news for WPAR is with AIX 7.1 it is possible to run an AIX 5.2 WPAR. However WPARs should not be looked as a permanent solution for a large server environment.
10 More Discussions You Might Find Interesting
1. Infrastructure Monitoring
Hi,
I have a shared AIX wpar configured.
I have started snmpd process on shared AIX wpar.
But when i tried to query a MIB id using the following command
/opt/OV/bin/snmpget -d -v 1 -c public -p <hostname> .1.3.6.1.2.1.1.7.0
i get the following error message
#... (0 Replies)
Discussion started by: avazeer
0 Replies
2. AIX
Hi all,
I have the following configuration
2 ds3524 storage disk systems located over 2 locations
2 P720 server located over 2 locations
DS3524 are connected to san switch.
Each vio server has 1 fc adapter attached to a san switch.
per p720 server 2 virtual io servers. Vio 1 has 1 lun... (2 Replies)
Discussion started by: markiemark
2 Replies
3. AIX
Hello,
We have a system running AIX 6.1.7.1. We have created a Workload Partition(wpar) on this system with wpar specific routing enabled.
On wpar, we are running DNS (UDP/53) and syslog (UDP/514).
en0: 1.1.1.1/255.255.255.0 NOT assigned to any wpar
en1:... (0 Replies)
Discussion started by: 03sep2011
0 Replies
4. Shell Programming and Scripting
Hi All,
This is for WPAR monitoring shell script, earlier opened thread was closed, had to open a new thread, as suggested I have used script as below, But am trying to get the output in below format, need suggestions with it. Below is the lswpar output, required output format.
... (7 Replies)
Discussion started by: aix_admin_007
7 Replies
5. UNIX for Advanced & Expert Users
Can anyone please let know difference between LPAR/DLPAR/WPAR.
and its purpose ??? (3 Replies)
Discussion started by: Pavithran
3 Replies
6. AIX
Hi everybody.
is anyone using versioned WPAR's?
Has anyone clustered them with PowerHA?
Please share your experience.
Regards, firefox (7 Replies)
Discussion started by: firefox111
7 Replies
7. AIX
Hi.
I've setup a wpar on aix
mkwpar -h ibmunix2 -i -r -N interface=en0 address=10.6.0.1 netmask=255.255.255.0 -n ibmunix2
When i log into ibmunix2 it can't ping any external host,include the ibm host.
How to set route for network please?
I've set ibmunix2 with a different subnet.
... (7 Replies)
Discussion started by: Linusolaradm1
7 Replies
8. AIX
There can be configurations in IBM Server wherein a
standalone partition is created on some supported IBM Server
Or
A VIOS - VIOC LPARs created.
Now in both cases they are lpars. But if I want to differentiate b/w a standalone LPAR vs an VIOC LPAR how can I do..?
On a... (2 Replies)
Discussion started by: Manish00712
2 Replies
9. AIX
AIX 7.1
New to WPAR, hopefully just missing something simple here.
Creating the WPAR like this.....
(The box where the WPAR is hosted does have an iscsi protocol device)
mkwpar -h wpar08 -l -n wpar08 -N interface=en0 address=xxx.xx.xx.xxx netmask=255.255.255.0 -D devname=/dev/iscsi0 -D... (0 Replies)
Discussion started by: TomR
0 Replies
10. AIX
I have this error when I'm trying to do clogin from AIX 7200-00-00-0000 into a wpar with AIX 5.2
abanksPaDesa2:/> clogin AbanksBDPA_wpar
exec: A file or directory in the path name does not exist
somebody can help me to fix this? I'm restoring the wpar from wpar mksysb not a mksysb from... (2 Replies)
Discussion started by: sandra25350
2 Replies
LEARN ABOUT DEBIAN
libcurl-easy
libcurl(3) libcurl easy interface libcurl(3)
NAME
libcurl-easy - easy interface overview
DESCRIPTION
When using libcurl's "easy" interface you init your session and get a handle (often referred to as an "easy handle"), which you use as
input to the easy interface functions you use. Use curl_easy_init(3) to get the handle.
You continue by setting all the options you want in the upcoming transfer, the most important among them is the URL itself (you can't
transfer anything without a specified URL as you may have figured out yourself). You might want to set some callbacks as well that will be
called from the library when data is available etc. curl_easy_setopt(3) is used for all this.
When all is setup, you tell libcurl to perform the transfer using curl_easy_perform(3). It will then do the entire operation and won't
return until it is done (successfully or not).
After the transfer has been made, you can set new options and make another transfer, or if you're done, cleanup the session by calling
curl_easy_cleanup(3). If you want persistent connections, you don't cleanup immediately, but instead run ahead and perform other transfers
using the same easy handle.
libcurl 7.10.7 12 Aug 2003 libcurl(3)