One of my friend gave me an old IBM 44P Model 170 (I've planned to use it to learn AIX that I don't know at all) (I know a bit GNU/Linux (Debian, Archlinux, Red Hat, Slackware)).
But, unfortunately, the computer doesn't start properly and I don't have any idea why ;(.
If it helps, you can see the output of the screen below.
And that's it. I can't do anything. The keyboard doesn't seem to respond.
Now, the questions :
- Does that mean the computer is dead?
- Also, there is no "press xx to access the BIOS". Is there a way to get an access to it?
- As you can see on the screen above, there is 1 = SMS Menu, 5 = Default Boot List etc..., but when I press F1, F5 or 1, 5, nothing is happening. Is that normal?
- Is there a way to boot from another media like a cdrom so I can try to install another system?
- Also, when I turn ON the computer, it takes at least 2 minutes before anything appears on the screen. Is that normal? When the screen appears, I see "1 = SMS Menu, 5 = Default Boot List etc..." then it does the tests (memory, keyboard, network, scsi, speakers).
Please, let me know if you need more informations about my hardware/problem.
Thanks a lot in advance.
When the choices arrive on the screen 1 SMS Menu and so on you would normally press 1 to go into SMS. On younger RS/6000 models SMS is built into an internal memory device. However with the older machines like yours a System Management Services floppy disk was supplied with each 43P. You will need one of these to boot into SMS.
We just got a machine with pre installed AIX 4.3.3.
It's and oldish RS/6000 F80.
When I power it on, the boot sequence advances finely, until it says
Welcome to AIX, closing stdin and stdout, or something like that.
From that point on the diagnostic display keeps counting the usual way for... (3 Replies)
Hi guys,
Got a tiny bit of a problem on one of our servers here at work. I installed AIX 5.3 on the server and that went fine. Then I upgraded to ML 5300-05-01, but now the system just hangs on boot.
The system starts up and the monitor comes on in few minutes, but a few seconds later when... (6 Replies)
To All:
I have this AIX machine (see boot process below). The problem was it hangs at:
The ctrmc Subsystem has been started. Subsystem PID is 11906..
I checked with other forums but their advise were just "strong punches in the air" with no specific explanation.
I really appreciate if... (6 Replies)
IBM P Series #7026
Error Codes
#E47E212E - init
#1BA70F4E - SRC
#BA431EB7 - SRC
#C69F5C9B- SYSPROC
#369DO49B - SYSPFS
This happens on reboot the core dump fills up the root file system so I don't think it completes the dump. I can't read the core file with dbx.
Thanks (6 Replies)
Hello Experts,
I'm trying to boot my AIX server via network using another AIX as a boot server. I use tcpdump to monitor the process. After my boot client received .info file and mounted nfs resource (checked by 'showmount -a' from boot server) it hung. I noticed a lot of following entries:
... (0 Replies)
We have a RS6000, model B50, type 7046, where I installed AIX 4.3.3
But, if the power goes off, the operating system does not restart,
and I have to go there and push the button to start AIX again.
Is there any way this procedure to be avoided,
this is, I want the AIX to start automatically... (9 Replies)
Hi, can someone point me to the bootup file where I can add a samba start up script so I dont have to manually start samba everytime we reboot the server? Thanks. (8 Replies)
We are having a bit of trouble finding where the following process is being started from at bootup.
/opt/IBM/tdsV6.2db2/itma/aix526/ud/bin/kuddb2 db2tdsWe have looked in the typical areas /etc/inittab & /etc/rc.d but have had no luck finding it, any ideas? (10 Replies)
Hi all,
We have a old Power4 server with AIX version 5.3 installed. Upon boot up, it hangs right after the AIX welcome screen. On the diagnostic load progress LED indicator, I saw that it stopped at '0c32' then after awhile the LED would be blank. The screen on the monitor will hang at the black... (15 Replies)
haii guys,..
How make first boot at AIX 6.1 OS.
I Will all new install Aix.
How the Command make first boot and step by step new installation Aix 6.1 ?
have Idea :)?
regard
williamen (7 Replies)