you need to press 1, 5 or 6 as soon as it starts counting up
most likely it is trying from a corrupted or non-existing boot image. You might try to fix it but you need to boot from cd or network to get into maintenance mode.
You can try to change the boot disk by pressing 1 - sms menu - and than get into boot options and select another disk
and - THERE IS NO BIOS ON AIX --- we have the sms menu
We just got a machine with pre installed AIX 4.3.3.
It's and oldish RS/6000 F80.
When I power it on, the boot sequence advances finely, until it says
Welcome to AIX, closing stdin and stdout, or something like that.
From that point on the diagnostic display keeps counting the usual way for... (3 Replies)
Hi guys,
Got a tiny bit of a problem on one of our servers here at work. I installed AIX 5.3 on the server and that went fine. Then I upgraded to ML 5300-05-01, but now the system just hangs on boot.
The system starts up and the monitor comes on in few minutes, but a few seconds later when... (6 Replies)
To All:
I have this AIX machine (see boot process below). The problem was it hangs at:
The ctrmc Subsystem has been started. Subsystem PID is 11906..
I checked with other forums but their advise were just "strong punches in the air" with no specific explanation.
I really appreciate if... (6 Replies)
IBM P Series #7026
Error Codes
#E47E212E - init
#1BA70F4E - SRC
#BA431EB7 - SRC
#C69F5C9B- SYSPROC
#369DO49B - SYSPFS
This happens on reboot the core dump fills up the root file system so I don't think it completes the dump. I can't read the core file with dbx.
Thanks (6 Replies)
Hello Experts,
I'm trying to boot my AIX server via network using another AIX as a boot server. I use tcpdump to monitor the process. After my boot client received .info file and mounted nfs resource (checked by 'showmount -a' from boot server) it hung. I noticed a lot of following entries:
... (0 Replies)
We have a RS6000, model B50, type 7046, where I installed AIX 4.3.3
But, if the power goes off, the operating system does not restart,
and I have to go there and push the button to start AIX again.
Is there any way this procedure to be avoided,
this is, I want the AIX to start automatically... (9 Replies)
Hi, can someone point me to the bootup file where I can add a samba start up script so I dont have to manually start samba everytime we reboot the server? Thanks. (8 Replies)
We are having a bit of trouble finding where the following process is being started from at bootup.
/opt/IBM/tdsV6.2db2/itma/aix526/ud/bin/kuddb2 db2tdsWe have looked in the typical areas /etc/inittab & /etc/rc.d but have had no luck finding it, any ideas? (10 Replies)
Hi all,
We have a old Power4 server with AIX version 5.3 installed. Upon boot up, it hangs right after the AIX welcome screen. On the diagnostic load progress LED indicator, I saw that it stopped at '0c32' then after awhile the LED would be blank. The screen on the monitor will hang at the black... (15 Replies)
haii guys,..
How make first boot at AIX 6.1 OS.
I Will all new install Aix.
How the Command make first boot and step by step new installation Aix 6.1 ?
have Idea :)?
regard
williamen (7 Replies)
Discussion started by: williamen
7 Replies
LEARN ABOUT OSX
installgrub
installgrub(1M)installgrub(1M)NAME
installgrub - install GRUB in a disk partition or a floppy
SYNOPSIS
/sbin/installgrub [-fm] stage1 stage2 raw-device
The installgrub command is an -only program. GRUB stands for GRand Unified Bootloader.
installgrub installs GRUB stage 1 and stage 2 files on the boot area of a disk partition. If you specify the -m option, installgrub
installs the stage 1 file on the master boot sector of the disk.
The installgrub command accepts the following options:
-f
Suppresses interaction when overwriting the master boot sector.
-m
Installs GRUB stage1 on the master boot sector interactively.
The installgrub command accepts the following operands:
stage1
The name of the GRUB stage 1 file.
stage2
The name of the GRUB stage 2 file.
raw-device
The name of the device onto which GRUB code is to be installed. It must be a character device that is readable and writable. For disk
devices, specify the slice where the GRUB menu file is located. (For Solaris it is the root slice.) For a floppy disk, it is
/dev/rdiskette.
Example 1: Installing GRUB on a Hard Disk Slice
The following command installs GRUB on a system where the root slice is c0d0s0:
example# /sbin/installgrub /boot/grub/stage1
/boot/grub/stage2 /dev/rdsk/c0d0s0
Example 2: Installing GRUB on a Floppy
The following command installs GRUB on a formatted floppy:
example# mount -F pcfs /dev/diskette /mnt
# mkdir -p /mnt/boot/grub
# cp /boot/grub/* /mnt/boot/grub
# umount /mnt
# cd /boot/grub
# /sbin/installgrub stage1 stage2 /dev/rdiskette
/boot/grub
Directory where GRUB files reside.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
boot(1M), fdisk(1M), fmthard(1M), kernel(1M), attributes(5)
Installing GRUB on the master boot sector (-m option) overrides any boot manager currently installed on the machine. The system will always
boot the GRUB in the Solaris partition regardless of which fdisk partition is active.
24 May 2005 installgrub(1M)