Solaris ssh client hangs when connecting to another Solaris machine Post: 302601457

10 More Discussions You Might Find Interesting

1. Solaris

trouble auto connecting ssh 3.6.1 (Solaris 8) to ssh 3.0.1 (Solaris 6)

I am currently setting up rdiff-backup to use ssh to connect and remotely backup and retrieve data. I am doing so by creating rsa keys for each server and copying the relevant key to the /.ssh folder on the relevant server. All seems to work well when severs running solaris 8 with ssh 3.6.1 are...

2. Solaris

Boot hangs up on solaris

Hi all, I have a SUN server Sun-Fire-V890 running solaris 9, with a remote system console . Both the IP adresses of the server and the console are in a private network (address 10.67.xxx). For some reasons I need to give the access to the server from outside address 194.xxx, but I prefer that...

3. UNIX for Dummies Questions & Answers

Solaris 10: Cannot ssh into machine- authentication issues

Greetings! I just managed to install Solaris 10 on a Sparc based machine. However, there might be a problem with the way ssh is configured. I CAN ssh from the machine into another on the network (same subnet, as root), but then the newly installed machine CANNOT seem to accept incoming ssh...

4. Shell Programming and Scripting

ssh connection from remote machine in solaris

Hi! I have two solaris 10 machines(say 10.1.1.1,10.1.1.2). i have installed rsync on 10.1.1.2, 10.1.1.1::: Sun Microsystems Inc. SunOS 5.10 Generic January 2005 -bash-3.00$ ssh 10.1.1.2 "echo $PATH" Password:...

5. Solaris

Unable to login using ssh,telnet onto my solaris machine with solaris 10 installed

Hi, I am unable to login into my terminal hosting Solaris 10 and get the below error message "Server refused to allocate pty ld.so.1: sh: fatal: libc.so.1: open failed: No such file or directory " Is there anyways i can get into my machine and what kind of changes are required to be...

6. Solaris

Solaris 10 system hangs

Solaris 10 (Sun V210) System hangs every couple of months. Have to go into ALOM to reset. I did a consolehistory report and seen this in it. Failed to exec inetd_start method of instance svc:/network/bootps/udp:default: I/O error WARNING: /pci@1c,600000/scsi@2 (glm0): Resetting...

7. Solaris

Solaris 10 - hangs during boot

Power server up runs through diagnostics. Goes to the boot section and then the bit where the cursor is spinning and thats it. Hangs completely. Any ideas?

8. Solaris

Solaris 10 - ufsdump hangs

Anyone ever see an issue where ufsdump 'hangs' after the IV Pass? Normally, it will update with an estimate of how long it will take to complete...and update the info every 20 minutes. I'm running the following command: root# ufsdump 0f - /fsmount | ( cd /zfs/newfsmount ) ; ufsrestore rf - )...

9. Solaris

Solaris 11 ssh on machine with multiple Ethernet ports

I have a server with 6 Ethernet ports. 4 are the the motherboard based 1 GBE ports and 2 are 10 GBE ports on NICs. I have set these all up with static IP addresses and use the standard /etc/nsswitch.files. My IP addresses are net0 192.168.1.82 net1 192.168.2.82 and so on till net5...

10. Solaris

How to add new Solaris client IP into Solaris 10 DNS server?

Hi, We just built a new Solaris 10 zone. And would like to add it to our DNS server. Its also Solaris 10. Please let me know how can I get the IP resolved using this DNS server. I added entry into zone config file but not working. I did restarted the DNS services. And also added nameserver name...

LEARN ABOUT MINIX

sftp-server

sftp-server(1M) 					  System Administration Commands					   sftp-server(1M)

NAME

       sftp-server - SFTP server subsystem

SYNOPSIS

       /usr/lib/ssh/sftp-server

DESCRIPTION

       sftp-server implements the server side of the SSH File Transfer Protocol as defined in the IETF draft-ietf-secsh-filexfer.

       sftp-server is a subsystem for sshd(1M) and must not be run directly. There are no options or config settings.

       To enable the sftp-server subsystem for sshd add the following to /etc/ssh/sshd_config:

       Subsystem   sftp     /usr/lib/ssh/sftp-server

       See sshd_config(4) for a description of the format and contents of that file.

       There is no relationship between the protocol used by sftp-server and the FTP protocol (RFC 959) provided by in.ftpd.

EXIT STATUS

       The following exit values are returned:

       0	Successful completion.

       >0	An error occurred.

FILES

       /usr/lib/sftp-server

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWsshdu 		   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       sftp(1), ssh(1), ssh-add(1), ssh-keygen(1), sshd(1M), sshd_config(4), attributes(5)

       To  view  license  terms,  attribution,	and  copyright	for OpenSSH, the default path is /var/sadm/pkg/SUNWsshdr/install/copyright. If the
       Solaris operating environment has been installed anywhere other than the default, modify the given path to access the file at the installed
       location.

AUTHOR

       Markus Friedl

SunOS 5.10							    30 Jul 2003 						   sftp-server(1M)

10 More Discussions You Might Find Interesting

1. Solaris

trouble auto connecting ssh 3.6.1 (Solaris 8) to ssh 3.0.1 (Solaris 6)

Discussion started by: falklandtim

2. Solaris

Boot hangs up on solaris

Discussion started by: aribault

3. UNIX for Dummies Questions & Answers

Solaris 10: Cannot ssh into machine- authentication issues

Discussion started by: agummad

4. Shell Programming and Scripting

ssh connection from remote machine in solaris

Discussion started by: dddkiran