Hi,
Thanks a lot for replying.
I have attached input & output file in a zip file.
I have a input file (.log/.txt format) which is located in the C:\cygwin\home\ebanpan. so when i login into cygwin software, i need to type some command to perform "deletion of few lines" on this input file and after performing the deletion save the output file at the same location. the line which need to be deleted is
" Total: 921 MOs
Bye...
Output has been logged to file /var/opt/ericsson/amos/moshell_logfiles/v46248C/logs_mobatch/2012-01-20/site.mo/15-38/CTL01274.log
"
basically this line is repeated multiple times in the input file which i need to delete. but this line is not fixed, start and end words of this line are fixed. i am also pasting one more line below so you can compare these two lines and find out which words will be fixed and which can change.
" Total: 926 MOs
Bye...
Output has been logged to file /var/opt/ericsson/amos/moshell_logfiles/v46248C/logs_mobatch/2012-01-20/site.mo/15-38/CTL01270.log
"
I hope you would be able to help me out. If you have any other questions/issues please let me know.
Thanks again.
Hi all.
After installing ssh on a server, i'd like to create a user with root privileges.
My problem is that after creating a user rootssh (uid=0, gid=20, /home/rootshh), i make rootssh's ssh keys. The problem is that normally the ssh-keygen should create the keys under $HOME/.ssh/, and actually... (6 Replies)
In my file, i have 4 Product names(For ex:Microsoft excel, Oracle,.Net,IBM websphere,..etc.,) I want this 4 Products in 4 individual .csv/excel file after running the script with those products related information. (12 Replies)
Hi,
I have one requirement, create separate files (".csv") from one excel file(xlsx) with multiple sheets. These ".csv" files are my source files. So anybody please suggest me the process.
Thanks in Advance.
Regards,
Harris (3 Replies)
i have written one script which generates text file which gives output like.
001.config: CR1.1 COMPILE_PASSED TEST_PASSED
002.config: CR1.1 COMPILE_FAILED TEST_FAILED
.
.
.so on
this text file will get filled one by one as its for loop for n number.
i... (7 Replies)
Hi,
i have shell script which compiles n number of test cases and execute them one by one. i want to create report in excel through script in which two columns namely "test id" and "release".second column have two subcolumns namely compiles and excutes. so i want first column should display test... (15 Replies)
I have a Excel VBA script that automatically runs when opened, extracts one table from a Microsoft Access Database, saves it as CSV, closes it, extracts another, saves it as CSV, closes it, then terminates itself.
Is is called from a short .bat file using the /e option so that Excel does not... (1 Reply)
I have a VBA that creates a new directory folder and creates a new text file in that directory. I am trying to run a perl script from the VBA and have created a batch file that gets called from the VBA. That bat file uses a shell file to run a script. When the batch file is called I get the error... (0 Replies)
Discussion started by: cmccabe
0 Replies
LEARN ABOUT X11R4
acctcon
acctcon(1M) System Administration Commands acctcon(1M)NAME
acctcon, acctcon1, acctcon2 - connect-time accounting
SYNOPSIS
/usr/lib/acct/acctcon [-l lineuse] [-o reboot]
/usr/lib/acct/acctcon1 [-p] [-t] [-l lineuse] [-o reboot]
/usr/lib/acct/acctcon2
DESCRIPTION
acctcon converts a sequence of login/logoff records to total accounting records (see the tacct format in acct.h(3HEAD)). The login/logoff
records are read from standard input. The file /var/adm/wtmpx is usually the source of the login/logoff records; however, because it might
contain corrupted records or system date changes, it should first be fixed using wtmpfix. The fixed version of file /var/adm/wtmpx can then
be redirected to acctcon. The tacct records are written to standard output.
acctcon is a combination of the programs acctcon1 and acctcon2. acctcon1 converts login/logoff records, taken from the fixed /var/adm/wtmpx
file, to ASCII output. acctcon2 reads the ASCII records produced by acctcon1 and converts them to tacct records. acctcon1 can be used with
the -l and -o options, described below, as well as with the -p and -t options.
OPTIONS -p Print input only, showing line name, login name, and time (in both numeric and date/time formats).
-t acctcon1 maintains a list of lines on which users are logged in. When it reaches the end of its input, it emits a session
record for each line that still appears to be active. It normally assumes that its input is a current file, so that it uses
the current time as the ending time for each session still in progress. The -t flag causes it to use, instead, the last
time found in its input, thus assuring reasonable and repeatable numbers for non-current files.
-l lineuse lineuse is created to contain a summary of line usage showing line name, number of minutes used, percentage of total
elapsed time used, number of sessions charged, number of logins, and number of logoffs. This file helps track line usage,
identify bad lines, and find software and hardware oddities. Hangup, termination of login(1) and termination of the login
shell each generate logoff records, so that the number of logoffs is often three to four times the number of sessions. See
init(1M) and utmpx(4).
-o reboot reboot is filled with an overall record for the accounting period, giving starting time, ending time, number of reboots,
and number of date changes.
EXAMPLES
Example 1: Using the acctcon command.
The acctcon command is typically used as follows:
example% acctcon -l lineuse -o reboots < tmpwtmp > ctacct
The acctcon1 and acctcon2 commands are typically used as follows:
example% acctcon1 -l lineuse -o reboots < tmpwtmp | sort +1n +2 > ctmp
example% acctcon2 < ctmp > ctacct
FILES
/var/adm/wtmpx History of user access and administration information
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWaccu |
+-----------------------------+-----------------------------+
SEE ALSO acctcom(1), login(1), acct(1M), acctcms(1M), acctmerg(1M), acctprc(1M), acctsh(1M), fwtmp(1M), init(1M), runacct(1M), acct(2),
acct.h(3HEAD), utmpx(4), attributes(5)
System Administration Guide: Basic Administration
NOTES
The line usage report is confused by date changes. Use wtmpfix (see fwtmp(1M)), with the /var/adm/wtmpx file as an argument, to correct
this situation.
During a single invocation of any given command, the acctcon, acctcon1, and acctcon2 commands can process a maximum of:
o 6000 distinct session
o 1000 distinct terminal lines
o 2000 distinct login names
If at some point the actual number of any one of these items exceeds the maximum, the command will not succeed.
SunOS 5.10 22 Feb 1999 acctcon(1M)