02-15-2012
we have already tried the possibilities like pulling the disk out and reinserting the same. No luck. We heard something REM version needs to be upgraded. As we have 2 LDOMs running on this single disk server we are worried about the REM upgrade.
9 More Discussions You Might Find Interesting
1. Solaris
I don't understood why on SPARC-Platforms have not present RAID-Controller ? Sorry for my bad english, but it's crazy always setup software RAID !!! I whanna Hardware RAID and when i can find solution ? (7 Replies)
Discussion started by: jess_t03
7 Replies
2. Solaris
Hi everyone
I've just purchased a Sun T5120 server with 2 internal disks. I've configured hardware RAID (mirror) and as a result the device tree in Solaris only contains 1 hard drive.
My question is, how would I know when one of the drives become faulty?
Thanks (2 Replies)
Discussion started by: soliberus
2 Replies
3. Solaris
HI guys.
Bit of a noob so bear with me.
I have 2 new disks I want to add to my StorEdge 3310 but am getting lost in the steps. We have another 3310 (JBOD) that I was able to plug the disks into and they instantly showed up. Did a few minor commands after (drvconfig, devfsadm etc..) and I was... (4 Replies)
Discussion started by: jamie_collins
4 Replies
4. Hardware
Can you mix DIMMs in a T6320 (sparc) blade? I have read/heard that the DIMMs in a memory bay must be identical but can you have different size DIMMs installed in the blade?
For instance, can you have 1 4GB DIMM in bay 0, 2 2GB DIMMs in bay 1, 4 1 GB DIMMs in bay 2 and 2 2GB DIMMs in bay 3 for a... (0 Replies)
Discussion started by: bluescreen
0 Replies
5. UNIX for Dummies Questions & Answers
Hi
Can someone tell me what are the differences between software and hardware raid ?
thx for help. (2 Replies)
Discussion started by: presul
2 Replies
6. Hardware
Hi All
I have a Sun T2000 server. Couple of years ago I had configured and mirrored the boot drive with an other drive using hardware RAID 1 using raidctl command.
Following is the hardware RAID output.
root@oracledatabaseserver / $ raidctl
RAID Volume RAID RAID Disk... (0 Replies)
Discussion started by: Tirmazi
0 Replies
7. Solaris
Hardware:
HP P2000
HP DL380 G7 with Solaris
Software:
Solaris 10 05/08
I had made a Hardware raid on P2000 and install solaris on G7,
The raid card controller is working fine.
How can I make the raid works on OS??
"raidclt" is getting nothing :wall::wall:
Thanks (11 Replies)
Discussion started by: stanley1024
11 Replies
8. Hardware
Hi all
I've just received my T3-1. It has 8 disks and I would like to configure RAID1 on the disks. The Sun documentation states that you can either use the OpenBoot PROMP utility called Fcode or you can use software via the Solaris OS.
The documentation doesn't make it clear if:
1. The... (6 Replies)
Discussion started by: soliberus
6 Replies
9. Solaris
Server Model: T5120 with 146G x4 disks.
OS: Solaris 10 - installed on c1t0d0.
Plan to use software raid (veritas volume mgr) on c1t2d0 disk.
After format and label the disk, still not able to detect using vxdiskadm.
Question:
Should I remove the hardware raid on c1t2d0 first?
My... (4 Replies)
Discussion started by: KhawHL
4 Replies
relup(5) Files relup(5)
NAME
relup - Release upgrade file
DESCRIPTION
The release upgrade file describes how a release is upgraded in a running system.
This file is automatically generated by systools:make_relup/3,4 , using a release resource file ( .rel ), application resource files ( .app
) and application upgrade files ( .appup ) as input.
FILE SYNTAX
In a target system, the release upgrade file should be located in the OTP_ROOT/erts-EVsn/Vsn directory.
The relup file contains one single Erlang term, which defines the instructions used to upgrade the release. The file has the following syn-
tax:
{Vsn,
[{UpFromVsn, Descr, Instructions}, ...],
[{DownToVsn, Descr, Instructions}, ...]}.
* Vsn = string() is the current version of the release.
* UpFromVsn = string() is an earlier version of the release to upgrade from.
* Descr = term() is a user defined parameter passed from the systools:make_relup/3,4 function. It will be used in the return value of
release_handler:install_release/1,2 .
* Instructions is a list of low-level release upgrade instructions, see appup(5) .
It consists of the release upgrade instructions from the respective application upgrade files (high-level instructions are translated
to low-level instructions), in the same order as in the start script.
* DownToVsn = string() is an earlier version of the release to downgrade to.
When upgrading from UpFromVsn with release_handler:install_release/1,2 , there does not have to be an exact match of versions, but
UpFromVsn can be a sub-string of the current release version.
SEE ALSO
app(5), appup(5), rel(5), release_handler(3erl), systools(3erl)
Ericsson AB sasl 2.1.9.3 relup(5)