for mount
Output:
Mount the loopback device as a randomly accessible file system with: Note: If output messege says that "device is busy" use -d parameter after than init 6. for umount
ok here is what i do and get:
# mount /dev/sd6a /cdrom
mount /dev/sd6a write-protected
ok so what do i do its a external cdrom and its on scsi number 6. its a SparcSTATION 2. we're trying to put red hat sparc 6.2 on it but it wont boot. i am about to take the hard drives out and install it a... (8 Replies)
I just built a jumpstart server on a Solaris 9 sun box and have had no problems jumpstarting other sol9 boxes using the custom rules. I've also copied a Solaris 10 image onto that same solaris 9 server and have had problems loading Solaris 10. These boxes will go directly to the manual OS install... (5 Replies)
Hi all ,
I am trying to jumpstart ( webstart) solaris 9 on E2900 ( client) using the DVD of a V440 server ( jumstart server). I did the setup for the V440 as follows :
cleaning up preexisting install client "XXXXXXX"
removing XXXXXXXfrom bootparams
removing /etc/bootparams, since it is... (14 Replies)
Hello everyone,
I tried to install solaris 10 using the command # boot net - install.
I take the image correctly but when you start installing the Operating system installation takes a long (4 hours I have left and not advancing but not send me any errors), it can be seen from the following:
... (7 Replies)
Hello,
First i'm Dutch, and my English is not very well. Sorry. :D
I have got a Sun Microsystems Ultra 3D (with SPARC processor). The file must be burned to a DVD. And my computer can onley read a cd.
How to get Solaris 10 on a few cds?
Please help me.
Thanks a lot..
Greets. (21 Replies)
Good day everyone,
I am trying to install some new senmail patch on my Solaris 10 system.
I know the cdrom for my CP3260 blade servers in my rack worked for the last patches installed. However, when I went to copy from the .tar file from the cdrom to the /tmp. I received an error cannot... (2 Replies)
I have a laptop and need to build an Oracle Linux kickstart server and a Solaris Jumpstart server that can build sparc and x86 systems.
Is the best way to create a dual boot from grub for Oracle Linux and Solaris x86?
Can the Oracle Kickstart be used as a Jumpstart to build both Solaris 10... (2 Replies)
Hello,
I am following the HPUX 11.31 install/update guide and I am trying to install "Update-UX" from the installation media. I put the CD into the drive, and I am trying to mount the device. The instructions state:Find the DVD-ROM device file name:
ioscan -C disk -f -n -k | more
A typical... (5 Replies)
I want to have a bootable DVD that will perform a jumpstart install of Solaris 10 x86 I've mainly used JumpStart DVD (with Solaris flash archive) for x86 platform as a reference, and I used the sysidcfg, profile, rules, etc. from a working jumpstart server. For the life of me, though, I cannot... (1 Reply)
Discussion started by: jnojr
1 Replies
LEARN ABOUT SUSE
lofi
lofi(7D) Devices lofi(7D)NAME
lofi - Loopback file driver
DESCRIPTION
The lofi file driver exports a file as a block device. Reads and writes to the block device are translated to reads and writes on the
underlying file. This is useful when the file contains a file system image. Exporting it as a block device through the lofi file driver
allows normal system utilities to operate on the image through the block device (like fstyp(1M)fsck(1M), and mount(1M). This is useful for
accessing CD-ROM and FAT floppy images. See lofiadm(1M) for examples.
File block device entries are contained in /dev/lofi, while /dev/rlofi contains the character (or raw) device entries. Entries are in the
form of decimal numbers which are assigned through lofiadm(1M). When created, these device entries are owned by root, in group sys, and
have permissions 0600. While ownership, group, and permission settings can be altered, there are possible ramifications. See lofiadm(1M)
for more information.
FILES
/dev/lofictl
Master control device
/dev/lofi/n
Block device for file n
/dev/rlofi/n
Character device for file n
/kernel/drv/lofi
32-bit driver
/kernel/drv/lofi.conf
Driver configuration file. (Should not be altered.)
/kernel/drv/sparcv9/lofi
64-bit driver
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsr, SUNWcarx.u |
+-----------------------------+-----------------------------+
SEE ALSO lofiadm(1M), fsck(1M), fstyp(1M), mount(1M), newfs(1M), attributes(5), lofs(7FS)NOTES
Just as you would not directly access a disk device that has mounted file systems, you should not access a file associated with a block
device except through the lofi file driver.
For compatability purposes, a raw device is also exported along with the block device. For example, newfs(1M) requires one.
SunOS 5.10 30 Jul 1999 lofi(7D)