Hi all,
this time I'd need a help from an advanced Solaris system admin
I attached a HP StorageWorks Ultrium 215 Tape Drives - Overview - c00059530 - HP Business Support Center to my Sun E220R and it got recognized immediately (probe-scsi-all).
Now the operating system boot process finished, I logged in with root and in dmesg I can see the drive:
Here are the questions:
How can I read the tape content?
How can I eject it with a shell command?
Can I load an already ejected tape?
Do I neccessarily need a proper/commercial Backup Software?
Can't I simply do the backup using dd command?
How would I do a full backup of the main harddisk sd0 ?
How would I do a full restore of the main harddisk sd0 ?
---------- Post updated at 18:41 ---------- Previous update was at 18:40 ----------
Thank you in advance for your attempt to help me! :-)
---------- Post updated at 18:44 ---------- Previous update was at 18:41 ----------
Please also note this is 100% my personal hobbyist problem!
It's definately not a real-world problem and of course this is not a homework or something.
I'm running SCO OS 505 on a Compaq proliant 1600, and my tape drive will just not work. It was working properly and whent to Sh?ts when I tried to get the cd rom working. I have uninstalled any configured tape drive and rebooted and then configured a tape drive and rebooted still nothing. I'm... (4 Replies)
I'm researching a tape drive + backup software to work across my unix/linux network. Was thinking about a dds4 tape drive (sony's) on my solaris ultra2, with some kind of software that would work across the network to back up my other 2 solaris boxes, plus my 2 linux boxes. What do others use... (3 Replies)
Hi all, please help I am stuck.
I have installed a external unipack scsi tape drive. The tape drive is Exabyte Eliant 820. All I did was connected scsi cable and power it on. When issued "probe-scsi-all" command, the tape is correctly identified. However, when issued "dmesg | more" command, the... (4 Replies)
hi-
I just installed a quad gigaswift ethernet scsi card to my sunblade 150. I checked with the docs, and got all of the required drivers on the box. Now, I'm trying to mount an external scsi tape drive with no luck. I set the scsi address on the external drive to 0. Here's what I'm coming... (9 Replies)
Currenty running SCO Openserver 6 at a Dell PowerEdge T300. I recently installed a driver for an Adaptec SCSI card (adpu320). When I connect a tape drive to it and re-start the system,it freezes and displays the following message: "WARNING: adpu320: Command timed out (ha= 4)" and the system... (2 Replies)
I have 2 servers in my office which are p570 and p550. Both run under AIX 5300-07. And I only have 1 x SCSI Ultrium LTO3 Tape Drive. For syncronization purposes, I always backup p570 server's database and restore into p550 server.
And due to the frequent process of syncronization, I require to... (1 Reply)
I've had a scsi hard drive, scsi tape drive, and cd rom working off an adaptec 29160 controller. Everything worked great until a few days ago. I begin getting tar format errors (running sco 5.0.6) on the tape drive and occasionally the entire system would hang up while trying to access data on... (0 Replies)
i connect an ibm ultrium lto 5 (sas) to an 8204-e8a (v6.1 TL5 SP 1)
then i do an cfgmgr and get message about missing filesets
devices.pciex.1410ca03
devices.pciex.pciexclass.00107
devices.pciex.00107200
devices.pciex.pciex100.72.3
and a few others
i try to find the filesets on the two OS... (1 Reply)