Is this the same computer as the original computer in this post: HP-UX server cloning
What output do you get from this "ioscan" enquiry:
Assuming this is one mirror of the system disc and you have physically removed the disc or corrupted it, this is a delicate sitution. The tactics depend on whether you want to replace the disc or permanently remove the disc. Because you are tempting fate with your cloning guesswork it has to be assumed that this is not a straightforward disc failure.
Hi Experts,
I have configured A D40 Array. There is an faulty disk which is not part of an raid volume but shows fault in the diagnostics.
pdisk15 U0.1-P1-I1/Q1-W40AA83CC2400D
SSA160 Physical Disk Drive ( MB)
Is there a way to stop this... (2 Replies)
We have a filesystem which contains 8 hard disks but i am facing disk I/O issue becuase data is not spreading across all the disks.Is there any way i can check how data is spreading and any parameter we need to change to spread ata across all disks.
OS--AIX 5.3 (1 Reply)
Hi,
Recently i came across a disk that seems to be faulty and need help. I have gathered some information by running below commands and any help on how to solve this will be great.
# uname –a
SunOS XYZ 5.7 Generic_106541-16 sun4u sparc SUNW,Ultra-4
#df -k
Filesystem kbytes used... (3 Replies)
Hi,
Have mirrored the primary disk to 3 .
Server and OS:
# uname -a
HP-UX pdwp1s B.11.11 U 9000/800 118434630 unlimited-user license
# model
9000/800/L3000-7x
# strings /etc/lvmtab
/dev/vg00
+F@<
/dev/dsk/c1t2d0
/dev/dsk/c2t2d0
/dev/dsk/c2t0d0
But now I have only 1 disk... (5 Replies)
Hello,
I'm new to this forum and as you will see from my question I'm new to UNIX as well.
One of our costumers has HP rx4640 running on UNIX with two 300GB hot-swappable disks that are mirrored. They reported to us that one of the disks is faulty and they want us to take care of it. Below is... (16 Replies)
Hi Guys,
One of two disks in my solaris machine has failed, the name is disk0, this is SUN physical sparc machine
But I work remotely, so people working near that physical server are not that technical, so from OS command prompt can run some command to bink faulty disk at front panel of Server.... (9 Replies)
Hi guys,
I would like to ask your opinion about my theory, how to fix my broken LVM without risking any data loss.
I use Archlinux at home. I just love this distro, even it gives me a lots of work (particularly after system updates).
Basic system spec:
AMD FX(tm)-6100 Six-Core Processor... (1 Reply)
Scenario1:
VG00 lvm,not mirrored,2 disk of 36GB vg size
VG00 size is under 30G.
Is possible to remove a disk of 36GB and replace "on fly"
with a disk of 300GB on VG00?
Thanks (6 Replies)
I plugged both power cables in both power supply. When I unplugged each power cable one by one, the SPARC T4-1 machine keep running. However, show faulty command shows below message. (I have also attached the picture of both power supply)
-> show faulty
Target ... (1 Reply)
Discussion started by: z_haseeb
1 Replies
LEARN ABOUT SUSE
cddb-tool
CDDB-TOOL(1) General Commands Manual CDDB-TOOL(1)NAME
cddb-tool - Get CDDB information
SYNOPSIS
cddb-tool parse file [-i|-d|-a|-t] [num|-c|-p]
cddb-tool template disc-id tracks
cddb-tool send [file] address
cddb-tool query server user host disc-id tracks
cddb-tool read server user host disc-id genre
cddb-tool help
DESCRIPTION
cddb-tool is a backend tool for abcde. It is passed information from cd-discid and uses it look up the CD title, artist, and track informa-
tion on the cddb database (http://freedb.freedb.org) on the internet.
COMMANDS
parse [file] option
Get data out of a cddb file (use "-" for stdin). Options (use one and only one):
id prints disc id
album prints album title
track num
prints title of track num
artist prints artist
category
prints category
cddbgenre
synonym for category
all parse file and dumps to stdout in a form sourceable by the shell
send [file] address
Mails file file (or stdin of no file specified) to specified address, using correct format. Category should be one of blues, classical,
country, data, folk, jazz, newage, reggae, rock, soundtrack, misc.
template [disc-id] [tracks]
Generates a template (empty) cddb file to stdout. The command line should be essentially the output of cd-discid.
query [server] [user] [host] [disc-id] [tracks]
Looks up disc on server (should be of form "http://host/cddb/cddb.cgi") remainder of command line is in the same form as that returned by
the cd-discid program. Uses wget, so if you need to use a proxy then just configure wget to do so. user and host will be used for identify-
ing ourselves to the CDDB server. Outputs response code and entries with matching CDDB entries, if successful, from the CDDB server.
read [server] [user] [host] [disc-id] [genre]
Dumps CDDB entry to stdout. File will contain an extra #CATEGORY= line, which leaves it a valid CDDB file but which will be recognized by
parse and send commands. Uses wget, so if you need to use a proxy then just configure wget to do so. user and host will be used for identi-
fying ourselves to the CDDB server.
help
Prints usage information.
AUTHOR
Nathaniel Smith <njs@uclink4.berkeley.edu>, maintained as part of abcde by Robert Woodcock <rcw@debian.org>. Manual page compiled from help
information by Robert Woodcock.
CDDB-TOOL(1)