Hi Experts,
I have configured A D40 Array. There is an faulty disk which is not part of an raid volume but shows fault in the diagnostics.
pdisk15 U0.1-P1-I1/Q1-W40AA83CC2400D
SSA160 Physical Disk Drive ( MB)
Is there a way to stop this... (2 Replies)
We have a filesystem which contains 8 hard disks but i am facing disk I/O issue becuase data is not spreading across all the disks.Is there any way i can check how data is spreading and any parameter we need to change to spread ata across all disks.
OS--AIX 5.3 (1 Reply)
Hi,
Recently i came across a disk that seems to be faulty and need help. I have gathered some information by running below commands and any help on how to solve this will be great.
# uname –a
SunOS XYZ 5.7 Generic_106541-16 sun4u sparc SUNW,Ultra-4
#df -k
Filesystem kbytes used... (3 Replies)
Hi,
Have mirrored the primary disk to 3 .
Server and OS:
# uname -a
HP-UX pdwp1s B.11.11 U 9000/800 118434630 unlimited-user license
# model
9000/800/L3000-7x
# strings /etc/lvmtab
/dev/vg00
+F@<
/dev/dsk/c1t2d0
/dev/dsk/c2t2d0
/dev/dsk/c2t0d0
But now I have only 1 disk... (5 Replies)
Hello,
I'm new to this forum and as you will see from my question I'm new to UNIX as well.
One of our costumers has HP rx4640 running on UNIX with two 300GB hot-swappable disks that are mirrored. They reported to us that one of the disks is faulty and they want us to take care of it. Below is... (16 Replies)
Hi Guys,
One of two disks in my solaris machine has failed, the name is disk0, this is SUN physical sparc machine
But I work remotely, so people working near that physical server are not that technical, so from OS command prompt can run some command to bink faulty disk at front panel of Server.... (9 Replies)
Hi guys,
I would like to ask your opinion about my theory, how to fix my broken LVM without risking any data loss.
I use Archlinux at home. I just love this distro, even it gives me a lots of work (particularly after system updates).
Basic system spec:
AMD FX(tm)-6100 Six-Core Processor... (1 Reply)
Scenario1:
VG00 lvm,not mirrored,2 disk of 36GB vg size
VG00 size is under 30G.
Is possible to remove a disk of 36GB and replace "on fly"
with a disk of 300GB on VG00?
Thanks (6 Replies)
I plugged both power cables in both power supply. When I unplugged each power cable one by one, the SPARC T4-1 machine keep running. However, show faulty command shows below message. (I have also attached the picture of both power supply)
-> show faulty
Target ... (1 Reply)
Discussion started by: z_haseeb
1 Replies
LEARN ABOUT SUNOS
vgdisplay
VGDISPLAY(8) System Manager's Manual VGDISPLAY(8)NAME
vgdisplay - display attributes of volume groups
SYNOPSIS
vgdisplay [-A|--activevolumegroups] [-c|--colon|-s|--short|-v|--verbose] [-d|--debug] [-h|--help] [--ignorelockingfailure] [--nosuffix]
[-P|--partial] [--unitshHbBsSkKmMgGtTpPeE] [--version] [VolumeGroupName[VolumeGroupName...]]
vgdisplay --columns | -C [--aligned][-d|--debug][-h|-?|--help] [--ignorelockingfailure][--noheadings][--nosuffix]
[-o|--options[+]Field[,Field]] [-O|--sort[+|-]Key1[,[+|-]Key2[,...]]] [-P|--partial] [--separatorSeparator] [--unbuffered] [--unitshHbB-
sSkKmMgGtTpPeE] [-v|--verbose] [--version] [VolumeGroupName[VolumeGroupName...]]
DESCRIPTION
vgdisplay allows you to see the attributes of VolumeGroupName (or all volume groups if none is given) with it's physical and logical vol-
umes and their sizes etc.
vgs (8) is an alternative that provides the same information in the style of ps (1).
OPTIONS
See lvm for common options and vgs for options given with --columns.
-A, --activevolumegroups
Only select the active volume groups.
-c, --colon
Generate colon separated output for easier parsing in scripts or programs. N.B. vgs (8) provides considerably more control over the
output.
The values are:
1 volume group name
2 volume group access
3 volume group status
4 internal volume group number
5 maximum number of logical volumes
6 current number of logical volumes
7 open count of all logical volumes in this volume group
8 maximum logical volume size
9 maximum number of physical volumes
10 current number of physical volumes
11 actual number of physical volumes
12 size of volume group in kilobytes
13 physical extent size
14 total number of physical extents for this volume group
15 allocated number of physical extents for this volume group
16 free number of physical extents for this volume group
17 uuid of volume group
-s, --short
Give a short listing showing the existence of volume groups.
-v, --verbose
Display verbose information containing long listings of physical and logical volumes. If given twice, also display verbose runtime
information of vgdisplay's activities.
--version
Display version and exit successfully.
--columns|-C
Display output in columns, the equivalent of vgs. Options listed are the same as options given in vgs (8).
SEE ALSO lvm(8), vgs(8), pvcreate(8), vgcreate(8), lvcreate(8)Sistina Software UK LVM TOOLS 2.02.95(2) (2012-03-06) VGDISPLAY(8)