if the attachment is not viewable here's the lsattr -El sys0:
Code:
SW_dist_intr false Enable SW distribution of interrupts True
autorestart true Automatically REBOOT OS after a crash True
boottype disk N/A False
capacity_inc 0.01 Processor capacity increment False
capped true Partition is capped False
conslogin enable System Console Login False
cpuguard enable CPU Guard True
dedicated false Partition is dedicated False
enhanced_RBAC true Enhanced RBAC Mode True
ent_capacity 6.00 Entitled processor capacity False
frequency 6400000000 System Bus Frequency False
fullcore false Enable full CORE dump True
fwversion IBM,AL720_082 Firmware version and revision levels False
ghostdev 0 Recreate devices in ODM on system change True
id_to_partition 0X80000B9662900002 Partition ID False
id_to_system 0X80000B9662900000 System ID False
iostat false Continuously maintain DISK I/O history True
keylock normal State of system keylock at boot time False
log_pg_dealloc true Log predictive memory page deallocation events True
max_capacity 12.00 Maximum potential processor capacity False
max_logname 9 Maximum login name length at boot time True
maxbuf 20 Maximum number of pages in block I/O BUFFER CACHE True
maxmbuf 0 Maximum Kbytes of real memory allowed for MBUFS True
maxpout 8193 HIGH water mark for pending write I/Os per file True
maxuproc 2048 Maximum number of PROCESSES allowed per user True
min_capacity 3.00 Minimum potential processor capacity False
minpout 4096 LOW water mark for pending write I/Os per file True
modelname IBM,8205-E6B Machine name False
ncargs 256 ARG/ENV list size in 4K byte blocks True
nfs4_acl_compat secure NFS4 ACL Compatibility Mode True
pre430core false Use pre-430 style CORE dump True
pre520tune disable Pre-520 tuning compatibility mode True
realmem 44826624 Amount of usable physical memory in Kbytes False
rtasversion 1 Open Firmware RTAS version False
sed_config select Stack Execution Disable (SED) Mode True
systemid IBM,020678F8P Hardware system identifier False
variable_weight 0 Variable processor capacity weight False
Last edited by zxmaus; 02-10-2012 at 08:27 AM..
Reason: Code tags
Hi you all, I have a BIG performance problem on an Sun E3500, the scenario is described below:
I have several users (30) accessing via samba to the E3500 using an application built on Visual Foxpro from their Windows PC , the problem is that the first guy that logs in demands 30% of the E3500... (2 Replies)
Hello,
i have a a1000 connected to an e6500. There's a raid 10 (12 disks) on the a1000.
If i do a
dd if=/dev/zero of=/mnt/1 bs=1024k count=1000
and then look at iostat it tells me there's a kw/s of 25000.
But if i do a
dd of=/dev/zero if=/mnt/1 bs=1024k count=1000
then i see only a... (1 Reply)
Hello,
I'm running a script on AIX to process lines in a file. I need to enclose the second column in quotation marks and write each line to a new file. I've come up with the following:
#!/bin/ksh
filename=$1
exec >> $filename.new
cat $filename | while read LINE
do
echo $LINE | awk... (2 Replies)
Hello all
We just built a storage cluster for our new xenserver farm. Using 3ware 9650SE raid controllers with 8 x 1TB WD sata disks in a raid 5, 256KB stripe size.
While making first performance test on the local storage server using dd (which simulates the read/write access to the disk... (1 Reply)
Hello,
we have a machine with Solaris Express 11, 2 LSI 9211 8i SAS 2 controllers (multipath to disks), multiport backplane, 16 Seagate Cheetah 15K RPM disks.
Each disk has a sequential performance of 220/230 MB/s and in fact if I do a
dd if=/dev/zero of=/dev/rdsk/<diskID_1> bs=1024k... (1 Reply)
Hello guys,
I have two servers performing the same disk operations. I believe one server is having a disk's impending failure however I have no hard evidence to prove it. This is a pair of Netra 210's with 2 drives in a hardware raid mirror (LSI raid controller). While performing intensive... (4 Replies)
Hi
We have an M3000 single physical processor and 8gb of memory running Solaris 10. This system runs two Oracle Databases one on Oracle 9i and One on Oracle 10g.
As soon as the Oracle 10g database starts we see an immediate drop in system performance, for example opening an ssh session can... (6 Replies)
Hi Everyone,
I have been struggling for few days with iSCSI and thought I could get some help on the forum...
fresh install of AIX7.1 TL4 on Power 710, The rootvg relies on 3 SAS disks in RAID 0, 32GB Memory
The lpar Profile is using all of the managed system's resources.
I have connected... (11 Replies)
Just a quick note for macOS users.
I just installed (and removed) Parallels Desktop 15 Edition on my MacPro (2013) with 64GB memory and 12-cores, which is running the latest version of macOS Catalina as of this post. The reason for this install was to test some RIGOL test gear software which... (6 Replies)
Discussion started by: Neo
6 Replies
LEARN ABOUT DEBIAN
xtissensitive
XtSetSensitive(3) XT FUNCTIONS XtSetSensitive(3)NAME
XtSetSensitive, XtIsSensitive - set and check a widget's sensitivity state
SYNTAX
void XtSetSensitive(Widget w, Boolean sensitive);
Boolean XtIsSensitive(Widget w);
ARGUMENTS
sensitive Specifies a Boolean value that indicates whether the widget should receive keyboard and pointer events.
w Specifies the widget.
DESCRIPTION
The XtSetSensitive function first calls XtSetValues on the current widget with an argument list specifying that the sensitive field should
change to the new value. It then recursively propagates the new value down the managed children tree by calling XtSetValues on each child
to set the ancestor_sensitive to the new value if the new values for sensitive and the child's ancestor_sensitive are not the same.
XtSetSensitive calls XtSetValues to change sensitive and ancestor_sensitive. Therefore, when one of these changes, the widget's set_values
procedure should take whatever display actions are needed (for example, greying out or stippling the widget).
XtSetSensitive maintains the invariant that if parent has either sensitive or ancestor_sensitive False, then all children have ances-
tor_sensitive False.
The XtIsSensitive function returns True or False to indicate whether or not user input events are being dispatched. If both core.sensitive
and core.ancestor_sensitive are True, XtIsSensitive returns True; otherwise, it returns False.
SEE ALSO
X Toolkit Intrinsics - C Language Interface
Xlib - C Language X Interface
X Version 11 libXt 1.1.3 XtSetSensitive(3)