I think my problem is somewhere else.
I know no disk is broken given that there are a few other raid arrays using the same 4 disks:
So I thought I should just check the disks.
Problem: fsck doesn't work:
How can I repair the filesystem on /dev/sdc10?
I am new to being a Unix admin and have a question about replacing some hardware. I have a K class box using HP-UX 10.20 with three disks. Two of the drives are in one logical volume. Every 3 or 4 days, the syslog is showing that one of these drives is experiencing "POWERFAILED" and then recovering... (6 Replies)
Forgive me, I do not know much about RAID so I'm going to be
as detailed as possible.
This morning, our server's alarm was going. I found that one
of our drives have failed. (we have 3)
It is an Adaptec ATA RAID 2400A controller
I'm purchasing a new SCSI drive today. My questions:
... (2 Replies)
Hi people, I have been using my disk for quite a long time but the other day I heard the drive making some noise and had to restart the system again. But when I did that the disk would not boot and I fear that the data might be deleted or lost. So, if you people have any know about the ways to get... (1 Reply)
Hi people,
I have been using my disk for quite a long time but the other day I heard the drive making some noise and had to restart the system again. But when I did that the disk would not boot and I fear that the data might be deleted or lost. So, if you people have any know about the ways to... (2 Replies)
hi all,
have a solaris 9 OS and a SAN disk which used to work fine is not getting picked up by my machine. can anyone point out things to check in order to troubleshoot this ??
thanks in advance. (3 Replies)
I'm new to forums, it's my first time posting.
I have a sun v490 server. I just installed solaris 10.6, on the local drives. I'm being asked to do the following:
For Oracle install I need “oracle” user that belong to “dba” and “oinstall” groups. File system /u01/app/oracle, 10GB (if... (6 Replies)
in red hat 4, 5 any one know any commands or any scritps to monitor HP DL 380 G5/6 server and trigger alarm when hard disk failed.
thanks for all support
---------- Post updated at 02:45 PM ---------- Previous update was at 12:00 PM ----------
does HP ProLiant Support Pack support is... (4 Replies)
Hello guys,
I have two servers performing the same disk operations. I believe one server is having a disk's impending failure however I have no hard evidence to prove it. This is a pair of Netra 210's with 2 drives in a hardware raid mirror (LSI raid controller). While performing intensive... (4 Replies)
Hi all,
I have encountered the issue with the hard disk, the disk is failed and need to replace by the new one.
As my understanding, this is just to take out the failed disk and insert the new ones, and that's all.
But the third party hardware vendor said, there should be another procedure... (9 Replies)
Discussion started by: Phat
9 Replies
LEARN ABOUT XFREE86
dumpe2fs
DUMPE2FS(8) System Manager's Manual DUMPE2FS(8)NAME
dumpe2fs - dump ext2/ext3/ext4 filesystem information
SYNOPSIS
dumpe2fs [ -bfghixV ] [ -o superblock=superblock ] [ -o blocksize=blocksize ] device
DESCRIPTION
dumpe2fs prints the super block and blocks group information for the filesystem present on device.
Note: When used with a mounted filesystem, the printed information may be old or inconsistent.
OPTIONS -b print the blocks which are reserved as bad in the filesystem.
-o superblock=superblock
use the block superblock when examining the filesystem. This option is not usually needed except by a filesystem wizard who is
examining the remains of a very badly corrupted filesystem.
-o blocksize=blocksize
use blocks of blocksize bytes when examining the filesystem. This option is not usually needed except by a filesystem wizard who is
examining the remains of a very badly corrupted filesystem.
-f force dumpe2fs to display a filesystem even though it may have some filesystem feature flags which dumpe2fs may not understand (and
which can cause some of dumpe2fs's display to be suspect).
-g display the group descriptor information in a machine readable colon-separated value format. The fields displayed are the group
number; the number of the first block in the group; the superblock location (or -1 if not present); the range of blocks used by the
group descriptors (or -1 if not present); the block bitmap location; the inode bitmap location; and the range of blocks used by the
inode table.
-h only display the superblock information and not any of the block group descriptor detail information.
-i display the filesystem data from an image file created by e2image, using device as the pathname to the image file.
-x print the detailed group information block numbers in hexadecimal format
-V print the version number of dumpe2fs and exit.
BUGS
You need to know the physical filesystem structure to understand the output.
AUTHOR
dumpe2fs was written by Remy Card <Remy.Card@linux.org>. It is currently being maintained by Theodore Ts'o <tytso@alum.mit.edu>.
AVAILABILITY
dumpe2fs is part of the e2fsprogs package and is available from http://e2fsprogs.sourceforge.net.
SEE ALSO e2fsck(8), mke2fs(8), tune2fs(8). ext4(5)E2fsprogs version 1.44.1 March 2018 DUMPE2FS(8)