I think my problem is somewhere else.
I know no disk is broken given that there are a few other raid arrays using the same 4 disks:
So I thought I should just check the disks.
Problem: fsck doesn't work:
How can I repair the filesystem on /dev/sdc10?
I am new to being a Unix admin and have a question about replacing some hardware. I have a K class box using HP-UX 10.20 with three disks. Two of the drives are in one logical volume. Every 3 or 4 days, the syslog is showing that one of these drives is experiencing "POWERFAILED" and then recovering... (6 Replies)
Forgive me, I do not know much about RAID so I'm going to be
as detailed as possible.
This morning, our server's alarm was going. I found that one
of our drives have failed. (we have 3)
It is an Adaptec ATA RAID 2400A controller
I'm purchasing a new SCSI drive today. My questions:
... (2 Replies)
Hi people, I have been using my disk for quite a long time but the other day I heard the drive making some noise and had to restart the system again. But when I did that the disk would not boot and I fear that the data might be deleted or lost. So, if you people have any know about the ways to get... (1 Reply)
Hi people,
I have been using my disk for quite a long time but the other day I heard the drive making some noise and had to restart the system again. But when I did that the disk would not boot and I fear that the data might be deleted or lost. So, if you people have any know about the ways to... (2 Replies)
hi all,
have a solaris 9 OS and a SAN disk which used to work fine is not getting picked up by my machine. can anyone point out things to check in order to troubleshoot this ??
thanks in advance. (3 Replies)
I'm new to forums, it's my first time posting.
I have a sun v490 server. I just installed solaris 10.6, on the local drives. I'm being asked to do the following:
For Oracle install I need “oracle” user that belong to “dba” and “oinstall” groups. File system /u01/app/oracle, 10GB (if... (6 Replies)
in red hat 4, 5 any one know any commands or any scritps to monitor HP DL 380 G5/6 server and trigger alarm when hard disk failed.
thanks for all support
---------- Post updated at 02:45 PM ---------- Previous update was at 12:00 PM ----------
does HP ProLiant Support Pack support is... (4 Replies)
Hello guys,
I have two servers performing the same disk operations. I believe one server is having a disk's impending failure however I have no hard evidence to prove it. This is a pair of Netra 210's with 2 drives in a hardware raid mirror (LSI raid controller). While performing intensive... (4 Replies)
Hi all,
I have encountered the issue with the hard disk, the disk is failed and need to replace by the new one.
As my understanding, this is just to take out the failed disk and insert the new ones, and that's all.
But the third party hardware vendor said, there should be another procedure... (9 Replies)
Discussion started by: Phat
9 Replies
LEARN ABOUT MINIX
fdisk
FDISK(8) System Manager's Manual FDISK(8)NAME
fdisk - partition a hard disk [IBM]
SYNOPSIS
fdisk [-hm] [-sn] [file]
OPTIONS -h Number of disk heads is m
-s Number of sectors per track is n
EXAMPLES
fdisk /dev/hd0 # Examine disk partitions
fdisk -h9 /dev/hd0 # Examine disk with 9 heads
DESCRIPTION
When fdisk starts up, it reads in the partition table and displays it. It then presents a menu to allow the user to modify partitions,
store the partition table on a file, or load it from a file. Partitions can be marked as MINIX, DOS or other, as well as active or not.
Using fdisk is self-explanatory. However, be aware that repartitioning a disk will cause information on it to be lost. Rebooting the sys-
tem immediately is mandatory after changing partition sizes and parameters. MINIX, XENIX, PC-IX, and MS-DOS all have different partition
numbering schemes. Thus when using multiple systems on the same disk, be careful.
Note that MINIX, unlike MS-DOS , cannot access the last sector in a partition with an odd number of sectors. The reason that odd partition
sizes do not cause a problem with MS-DOS is that MS-DOS allocates disk space in units of 512-byte sectors, whereas MINIX uses 1K blocks.
Fdisk has a variety of other features that can be seen by typing h.
Fdisk normally knows the geometry of the device by asking the driver. You can use the -h and -s options to override the numbers found.
SEE ALSO part(8).
FDISK(8)