You'll need to install grub, then, from some sort of linux livecd. Make sure your boot partition is mounted on /boot. Your boot partition should also contain a symlink named 'boot' that just links to the current directory, like
Not necessarily sda! Use the right device for your file.
Then you'll have to customize your menu.lst so it finds your partitions.
Hi,
I have an SGI workstation running on Irix 6.5. A few days ago the system started giving messages that the root directory is full. Even before I could find out how to clean up the root directory, the system crashed and does not boot anymore. Can anyone help me on how I can get the system to... (1 Reply)
Hi all ,
I have an E2900 SPARC IV that has Solaris 10 installed , I am trying to replace solaris 10 with soalris 9/04 , But the installation is giving me an error:
Cannot assemble drivers for root /ssm@0,0/pci@18,700000/pci@4/ide@2/cdrom@0,0:b
Cannot mount root on... (3 Replies)
during installation i created four partitions mainly
/ 5GB
/home 1GB
/boot 100MB
swap 2GB
now since i didnt make the /usr partition all of the packages were being installed in the / partition ..now all the space in the / partition is filled ...i ran du -h... (3 Replies)
Hi All,
I have successfully backup & restore (using tar) one of my Debian Lenny Servers.
On the restore server (standby machine), everytime i have to erase the disk & extract the tar backup.
I want to extract the tar on the running restore server on a directory for e.g /systembackup-01,... (11 Replies)
Hello,
I have a very old hp rp2450 running 11i2 that I had to power off. When turning it back on it hangs with the following message. Would booting into SUM get me any further? I've never used SUM, so I'm asking before I go down that rabbit hole.
Thanks for the help.
#
## extra content... (1 Reply)
Came home the other day to a Napp-it Gui that would not load.
Login would appear but when i attempted I would get the following
Set default permissions and reading disk and pool parameter, please wait..
in case of problems, try a reboot after Power-Off or check disk and pool status at CLI.... (1 Reply)
Good day,
Anybody, know how to clean/free up the Cluster_boot partition in TRU64
Thank you in advance
Miaka (0 Replies)
Discussion started by: miaka1012
0 Replies
LEARN ABOUT BSD
installgrub
installgrub(1M)installgrub(1M)NAME
installgrub - install GRUB in a disk partition or a floppy
SYNOPSIS
/sbin/installgrub [-fm] stage1 stage2 raw-device
The installgrub command is an -only program. GRUB stands for GRand Unified Bootloader.
installgrub installs GRUB stage 1 and stage 2 files on the boot area of a disk partition. If you specify the -m option, installgrub
installs the stage 1 file on the master boot sector of the disk.
The installgrub command accepts the following options:
-f
Suppresses interaction when overwriting the master boot sector.
-m
Installs GRUB stage1 on the master boot sector interactively.
The installgrub command accepts the following operands:
stage1
The name of the GRUB stage 1 file.
stage2
The name of the GRUB stage 2 file.
raw-device
The name of the device onto which GRUB code is to be installed. It must be a character device that is readable and writable. For disk
devices, specify the slice where the GRUB menu file is located. (For Solaris it is the root slice.) For a floppy disk, it is
/dev/rdiskette.
Example 1: Installing GRUB on a Hard Disk Slice
The following command installs GRUB on a system where the root slice is c0d0s0:
example# /sbin/installgrub /boot/grub/stage1
/boot/grub/stage2 /dev/rdsk/c0d0s0
Example 2: Installing GRUB on a Floppy
The following command installs GRUB on a formatted floppy:
example# mount -F pcfs /dev/diskette /mnt
# mkdir -p /mnt/boot/grub
# cp /boot/grub/* /mnt/boot/grub
# umount /mnt
# cd /boot/grub
# /sbin/installgrub stage1 stage2 /dev/rdiskette
/boot/grub
Directory where GRUB files reside.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
boot(1M), fdisk(1M), fmthard(1M), kernel(1M), attributes(5)
Installing GRUB on the master boot sector (-m option) overrides any boot manager currently installed on the machine. The system will always
boot the GRUB in the Solaris partition regardless of which fdisk partition is active.
24 May 2005 installgrub(1M)