Looking for some clues on how to set my internal hard drives inaccessible/busy to clonezilla. Noprobe doesn't work in startup and the drive is still found.
I know I can find all hard drives using the following:
I tried mounting the drive to make it busy and inaccessible to clonezilla but the fs can't be determined. It is a windows xp install but it is also encrypted on bootup. I tried vfat, ntfs, ntfs-3, etc with no luck.
So another option is how do I make clonezilla not probe internal hard drives? I'm unfamiliar with recompiling source code and hope it doesn't come to that to disable hdd controllers.
Will some one tell me what this means.
"warning: ida 0 <slot 6> : command timed out on dev 1/42 blk 4824290 logical unit=0 blocks=5512102, size 2, cmd=0x20."
I'm running SCO 505 on a proliant 1600r.
Thnank you in advance. (3 Replies)
I am using an Acer Aspire 4720Z with two partitions C and D. Windows is installed on C and I decided to install Red Hat Linux 9 in partition D. The two partitions are in NTFS file system. During my installation of the the Linux, a prompt was displayed on screen with the message: "No hard drives... (2 Replies)
Any recommend manufacturers for an internal SCSI tape drive in my FreeBSD 7.0 home server? Besides RAID-1, I'm not backing-up, but man, are they expensive! What makes a tape drive so darn pricy? There is no way I can afford a new drive so I'll start looking on eBay and craigslist to see if there... (3 Replies)
Version: solaris 10 x86
I just got a western digital external harddrive formated with fat 32. this drive came with some setup files which is meant for windows or mac.
I want to reformat and partition this drive into two ( for solaris and windows) such that the setup files will still be there... (2 Replies)
Folks;
I just added 2 physical new hard drives to my SUSE server. My server is already running SUSE 10.3 version.
Is there a command i can use to add the new space or even see if the system can sees them? (3 Replies)
Hello, I need to write a program which sets server's ip address, router, network mask. Program also should set if it is an internal or external ip. Maybe someone can help me ? Any information from u is very useful :b:
I stopped at .. :(
#!/bin/sh
A=`hostname -i`
echo "server ip address is $A"... (4 Replies)
I have a T2000 Sun-Fire server. I have 2 sets of drives in a raid 1. Lets call them Set A and Set B. I had Set A installed and working. I needed a new install so I so build up Set B. After some time I wanted to put Set A back in the server. Now the system will not boot off of Set A. I tried to boot... (7 Replies)
Hello everyone. I have a question which I may know the answer to, I'm just looking for a confirmation. When it comes to the MBR of a hard drive, i've read in multiple sources that it's always located in the first sector of the hard drive. Is the MBR there from the factory? When I buy a new blank... (3 Replies)
Hi,
I have two SCSI Hard Drives in a Sun Solaris 8 server as shown below. I would like to access Disk1 and look at its contents, directory structure and files. How do I change my default directory from Disk 0 to Disk 1 and vice versa?
Thank you. (5 Replies)
Ok so i thought i was smart but i can tell I need some help. I am playing around with understanding lvm and adding disks to a linux box. I added a disk and then ran what i thought were commands to add this disk to the box but I think I messed up and would like some help. My question is did i... (5 Replies)
Discussion started by: cptkirkh
5 Replies
LEARN ABOUT REDHAT
smartctl
SMARTCTL(8) System Manager's Manual SMARTCTL(8)NAME
smartctl - S.M.A.R.T. control utility
SYNOPSIS
smartctl [-cdeglostv] [device]
DESCRIPTION
smartctl controls the Self-Monitoring, Analysis and Reporting Technology System(S.M.A.R.T.) built into ATA-3 and later IDE and SCSI-3 Hard
Drives. This is used to check the reliability of the hard drive and predict drive failures. TapeAlerts support for SCSI tape drives and
changers smartctl is command line utility designed to perform simple S.M.A.R.T. tasks.
OPTIONS
smartctl accepts two agruments, options and device in respective order. The options begin with a '-' and multiple options should be begun
with a single '-'. The second argument is the device to be controled. ATA device use the form "/dev/hd*" and SCSI devices use the form
"/dev/sd*". SCSI devices use only options a,i,c,e,d. For SCSI Tape Drives and Changers with TapeAlerts support use the form "/dev/st*" and
"/dev/sg*". TapeAlerts devices use only a,i,c,e,d.
i Check if the device supports S.M.A.R.T
c Check if device has any S.M.A.R.T. Warranty Failures
g Prints only the generic S.M.A.R.T. attributes
v Prints only the vendor specific S.M.A.R.T. attributes
t Prints only the vendor specific S.M.A.R.T. thresholds
l Prints only the S.M.A.R.T. error log
a Prints all parameters for c,i,g,v,t,l (for SCSI c,i)
e Enables S.M.A.R.T. on device
d Disables S.M.A.R.T. on device
t Enables S.M.A.R.T. automatic offline self test timer which scans the drive every four hours for disk defects.
T Disables S.M.A.R.T. automatic offline self test timer
O Runs S.M.A.R.T. Immediate off-line Test
S Runs S.M.A.R.T. Short Self Test ( usually under ten minutes)
s Runs S.M.A.R.T. Short Self Test in Captive Mode.
( WARNING: This test will busy out drive for length of test. Only run this on drives without any mounted partitions.)
X Runs S.M.A.R.T. Extended Self Test ( tens of minutes)
x Runs S.M.A.R.T. Extended Self Test in Captive Mode. ( WARNING: This test will busy out drive for length of test. Only run this on
drives without any mounted partitions.)
A Aborts Non-Captive S.M.A.R.T. Tests.
EXAMPLES
smartctl -a /dev/hda - prints all S.M.A.R.T. infomration for drive /dev/hda (Primary Master)
smartctl -d /dev/hdd - disable S.M.A.R.T. on drive /dev/hdd (Secondary Slave)
AUTHOR
Michael Cornwell, cornwell@acm.org
Concurrent Systems Laboratory
Jack Baskin School of Engineering
University of California Santa Cruz
http://csl.cse.ucsc.edu/
smartctl-2.1 September 13, 2001 SMARTCTL(8)