Looking for some clues on how to set my internal hard drives inaccessible/busy to clonezilla. Noprobe doesn't work in startup and the drive is still found.
I know I can find all hard drives using the following:
I tried mounting the drive to make it busy and inaccessible to clonezilla but the fs can't be determined. It is a windows xp install but it is also encrypted on bootup. I tried vfat, ntfs, ntfs-3, etc with no luck.
So another option is how do I make clonezilla not probe internal hard drives? I'm unfamiliar with recompiling source code and hope it doesn't come to that to disable hdd controllers.
Will some one tell me what this means.
"warning: ida 0 <slot 6> : command timed out on dev 1/42 blk 4824290 logical unit=0 blocks=5512102, size 2, cmd=0x20."
I'm running SCO 505 on a proliant 1600r.
Thnank you in advance. (3 Replies)
I am using an Acer Aspire 4720Z with two partitions C and D. Windows is installed on C and I decided to install Red Hat Linux 9 in partition D. The two partitions are in NTFS file system. During my installation of the the Linux, a prompt was displayed on screen with the message: "No hard drives... (2 Replies)
Any recommend manufacturers for an internal SCSI tape drive in my FreeBSD 7.0 home server? Besides RAID-1, I'm not backing-up, but man, are they expensive! What makes a tape drive so darn pricy? There is no way I can afford a new drive so I'll start looking on eBay and craigslist to see if there... (3 Replies)
Version: solaris 10 x86
I just got a western digital external harddrive formated with fat 32. this drive came with some setup files which is meant for windows or mac.
I want to reformat and partition this drive into two ( for solaris and windows) such that the setup files will still be there... (2 Replies)
Folks;
I just added 2 physical new hard drives to my SUSE server. My server is already running SUSE 10.3 version.
Is there a command i can use to add the new space or even see if the system can sees them? (3 Replies)
Hello, I need to write a program which sets server's ip address, router, network mask. Program also should set if it is an internal or external ip. Maybe someone can help me ? Any information from u is very useful :b:
I stopped at .. :(
#!/bin/sh
A=`hostname -i`
echo "server ip address is $A"... (4 Replies)
I have a T2000 Sun-Fire server. I have 2 sets of drives in a raid 1. Lets call them Set A and Set B. I had Set A installed and working. I needed a new install so I so build up Set B. After some time I wanted to put Set A back in the server. Now the system will not boot off of Set A. I tried to boot... (7 Replies)
Hello everyone. I have a question which I may know the answer to, I'm just looking for a confirmation. When it comes to the MBR of a hard drive, i've read in multiple sources that it's always located in the first sector of the hard drive. Is the MBR there from the factory? When I buy a new blank... (3 Replies)
Hi,
I have two SCSI Hard Drives in a Sun Solaris 8 server as shown below. I would like to access Disk1 and look at its contents, directory structure and files. How do I change my default directory from Disk 0 to Disk 1 and vice versa?
Thank you. (5 Replies)
Ok so i thought i was smart but i can tell I need some help. I am playing around with understanding lvm and adding disks to a linux box. I added a disk and then ran what i thought were commands to add this disk to the box but I think I messed up and would like some help. My question is did i... (5 Replies)
Discussion started by: cptkirkh
5 Replies
LEARN ABOUT DEBIAN
mhddfs
mhddfs(1) General Commands Manual mhddfs(1)NAME
mhddfs - The driver combines a several mount points into the single one.
SYNOPSIS
mhddfs /dir1,/dir2[,/path/to/dir3] /path/to/mount [-o options]
mhddfs /dir1 dir2,dir3 /mount/point [-o options]
...
fusermount -u /path/to/mount
fstab record example:
mhddfs#/path/to/dir1,/path/to/dir2 /mnt/point fuse defaults 0 0
mhddfs#/dir1,/dir2,/dir3 /mnt fuse logfile=/var/log/mhddfs.log 0 0
OPTIONS
with an -o option1,option2... you can specify some additional options:
logfile=/path/to/file.log
specify a file that will contain debug information.
loglevel=x
0 - debug messages
1 - info messages
2 - standard (default) messages
mlimit=size[m|k|g]
a free space size threshold If a drive has the free space less than the threshold specifed then another drive will be choosen while creat-
ing a new file. If all the drives have free space less than the threshold specified then a drive containing most free space will be
choosen.
Default value is 4G, minimum value is 100M.
This option accepts suffixes:
[mM] - megabytes
[gG] - gigabytes
[kK] - kilobytes
For an information about the additional options see output of:
mhddfs -h
DESCRIPTION
The file system allows to unite a several mount points (or directories) to the single one. So a one big filesystem is simulated and this
makes it possible to combine a several hard drives or network file systems. This system is like unionfs but it can choose a drive with the
most of free space, and move the data between drives transparently for the applications.
While writing files they are written to a 1st hdd until the hdd has the free space (see mlimit option), then they are written on a 2nd hdd,
then to 3rd etc.
df will show a total statistics of all filesystems like there is a big one hdd.
If an overflow arises while writing to the hdd1 then a file content already written will be transferred to a hdd containing enough of free
space for a file. The transferring is processed on-the-fly, fully transparent for the application that is writing. So this behaviour simu-
lates a big file system.
WARNINGS
The filesystems are combined must provide a possibility to get their parameters correctly (e.g. size of free space). Otherwise the writing
failure can occur (but data consistency will be ok anyway). For example it is a bad idea to combine a several sshfs systems together.
Please read FUSE documentation for a further conception.
COPYRIGHT
Distributed under GPLv3
Copyright (C) 2008 Dmitry E. Oboukhov <dimka@avanto.org>
February 2008 mhddfs(1)