01-17-2012
3510FC connected to Solaris10 -- v240
had this one controller tray 12 disks and one expansion tray 12 disks, hard-linked to a v240 system..
for some reasons, only 6 drives from the controller tray are on..and 6 drives from the expansion tray are on...
I can run sccli into the array.. none of the show commands come up with anything meaning..except "this config is not supported by this RAID controller .."
The firmware on the 3510FC is updated, I am running sccli 2.4, the latest
release..
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hello all,
Does anyone know how to reset the ALOM password for Sun fire V240 or the OBP password? I was given a V240 without any password or hard drive.
Thanks (3 Replies)
Discussion started by: larryase
3 Replies
2. UNIX for Dummies Questions & Answers
Hi,
I trying to jumpstart SunFire V240 Solaris 10, 2006_01. All the jumpstart files on jumpstart install and boot server are ok (tested on another machine Sun Ultra 10). But this system comes out with: "The file just loaded does not appear to be executable." after "boot net - install" and setting... (0 Replies)
Discussion started by: jump
0 Replies
3. Solaris
Hi,
we are having one sun v240 server, now this server is performing very slow,
checked using top, iostat and vmstat commands, output is looking normal, but the performance is very slow and generating more traffic in network,
how can we resolve this.
Regards
RJS (5 Replies)
Discussion started by: rajasekg
5 Replies
4. Hardware
I recently acquired a sunfire v240 and I'm trying to get into it so I can install linux on it. Right now I'm still trying to get a monitor connected so I can do this.
I've tried connecting to it with a crossover cable to my laptop (vista and linux equipped). I was able to get a connection... (2 Replies)
Discussion started by: QuadRunner750
2 Replies
5. Solaris
hallo anybody know how to set alom mail alerty server with yahoomail ?
thank u?where i can find mail server address for yahoomail?thank (1 Reply)
Discussion started by: yanto85
1 Replies
6. Solaris
Dear All,
I have problem with SF V240 with solaris 10. This server always booting with error message like this
What's problem with my server?
Best Regards
Wisnu:) (10 Replies)
Discussion started by: mbah_jiman
10 Replies
7. Solaris
after shutting down the server and the ILOM/ALOM,
its date seems to go back to 1977..rather than current date..
problem with battery on ILOM/ALOM ??:( (1 Reply)
Discussion started by: ppchu99
1 Replies
8. Solaris
Hi All, I'm new to this site. I have a few question since I'm in the process how to to repair my raid on Sun V240 Server.
1. How can we create RAID in Sun Sparc v240?
2. What utility can help people create RAID in Sun Sparc v240?
3. Do we need any special software to create the... (12 Replies)
Discussion started by: angkor
12 Replies
9. Solaris
had a v240 pre-configured and running the OS and alom, for about 3 months good, no issues.
All of sudden, I can't see the IP address of the OS and the alom..
There is nothing wrong with thet network...
I suspect the ALOM crashed and/or something bad happened to it..
Is there anyway... (3 Replies)
Discussion started by: ppchu99
3 Replies
10. Solaris
Hey guys,
I recently replaced the heatsinks on two different V240's. Repasted and replaced them myself. After attempting to bring them back up, there was no display coming from the KVM. I figured it was a matter of environment in OBP and attempted to get to the OK prompt from the... (20 Replies)
Discussion started by: DanielSluder
20 Replies
LEARN ABOUT FREEBSD
mlxcontrol
MLXCONTROL(8) BSD System Manager's Manual MLXCONTROL(8)
NAME
mlxcontrol -- Mylex DAC-family RAID management utility
SYNOPSIS
mlxcontrol <command> [args]
mlxcontrol status [-qv] [drive]
mlxcontrol rescan controller [controller ...]
mlxcontrol detach drive [drive ...]
mlxcontrol detach -a
mlxcontrol check drive
mlxcontrol config controller
mlxcontrol help command
DESCRIPTION
The mlxcontrol utility provides status monitoring and management functions for devices attached to the mlx(4) driver.
Controller names are of the form "mlxN" where N is the unit number of the controller. Drive names are of the form "mlxdN" where N is the
unit number of the drive. Do not specify the path to a device node.
status Print the status of controllers and system drives. If one or more drives are specified, only print information about these drives,
otherwise print information about all controllers and drives in the system. With the -v flag, display much more verbose informa-
tion. With the -q flag, do not print any output. This command returns 0 if all drives tested are online, 1 if one or more drives
are critical and 2 if one or more are offline.
rescan Rescan one or more controllers for non-attached system drives (e.g. drives that have been detached or created subsequent to driver
initialisation). If the -a flag is supplied, rescan all controllers in the system.
detach Detach one or more system drives. Drives must be unmounted and not opened by any other utility for this command to succeed. If the
-a flag is supplied, detach all system drives from the nominated controller.
check Initiate a consistency check and repair pass on a redundant system drive (e.g. RAID1 or RAID5). The controller will scan the system
drive and repair any inconsistencies. This command returns immediately; use the status command to monitor the progress of the
check.
rebuild Requires two arguments, controller and physdrive as specified in the output of the status command. All system drives using space on
the physical drive physdrive are rebuilt, reconstructing all data on the drive. Note that each controller can only perform one
rebuild at a time. This command returns immediately; use the status command to monitor the progress of the rebuild.
config Print the current configuration from the nominated controller. This command will be updated to allow addition/deletion of system
drives from a configuration in a future release.
help Print usage information for command.
AUTHORS
The mlxcontrol utility was written by Michael Smith <msmith@FreeBSD.org>.
BUGS
The config command does not yet support modifying system drive configuration.
Error log extraction is not yet supported.
BSD
April 10, 2000 BSD