Hi Does anyone know the command to configure HP tape slots. I have tried the following on Sun, but its notworking. This is the first time I have configured a tape drive with muiltple slots.
root@ssdb0009 # cfgadm -l
Ap_Id Type Receptacle Occupant Conditio... (3 Replies)
Hello,
I'm running Red Hat Linux on a Dell Poweredge 2650 Rack Server and wondered if anyone knew of a tool or command I could use to probe the memory slots on the motherboard.
I know the machine has six memory slots and currently contains 1GB RAM, what I don't know however, is if it contains... (3 Replies)
Has anyone ever relocated an HBA card after already having it configured in another PCI slot? I've found that the HBA instance #'s start incrementing past the previous. It results in me having to have my instance numbers in /kernel/drv/qla2300.conf be 4,5,6,7 instead of 0,1,2,3. Cleanup with... (5 Replies)
I've got lots of scsi transport errors on the E2900 - the HBA was replaced once out of curiosity but the problem still exists.
Feb 15 07:03:11 ivsdbch2 scsi: WARNING: /ssm@0,0/pci@18
,600000/SUNW,jfca@1,1/fp@0,0/ssd@w5005076300c889cb,4 (ssd21):
Feb 15 07:03:11 ivsdbch2 SCSI transport... (1 Reply)
I'm looking for open PCI slots in our array of sun boxes. I need help on how to distinguish if there's an open slot or not using prtdiag and prtconf. Is there a better tool for this? TIA.
Here's my prtdiag -v | grep pci:
pci 66 PCI5 SUNW,qlc-pci1077,2312 (scsi-+
... (9 Replies)
A while back I had a command that shows the memory slots (and info on the modules inserter) in an IBM AIX machine. I cannot remember it at this time, can someone help me out with this command please? (4 Replies)
Hi, all. I was wondering if there's a command or log file that will tell me how much RAM is in the system and, more specifically, the size of each stick.
Thanks,
Jason (3 Replies)
Hi,
I have a Sun Fire V440 server that fails to boot up correctly. A lot of services are not started and the sytems acts really slow to commands. During boot I can see the following Error:
WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
SCSI transport failed: reason 'reset': retrying... (15 Replies)
Discussion started by: oliwei
15 Replies
LEARN ABOUT OPENSOLARIS
pccbb
PCCBB(4) BSD Kernel Interfaces Manual PCCBB(4)NAME
pccbb -- cardbus bridge driver
SYNOPSIS
device cbb
device pccard
device cardbus
device exca
DESCRIPTION
The pccbb driver implements the Yenta specification for CardBus bridges.
The following PCI cardbus and pcmcia bridges are supported:
Cirrus Logic PD6832
Cirrus Logic PD6833
Cirrus Logic PD6834
O2micro OZ6812
O2micro OZ6832
O2micro OZ6833
O2micro OZ6836
O2micro OZ6860
O2micro OZ6872
O2micro OZ6912
O2micro OZ6922
O2micro OZ6933
O2micro OZ6972
O2Micro OZ711E1
O2Micro OZ711M1
Ricoh RL4C475
Ricoh RL4C476
Ricoh RL4C477
Ricoh RL4C478
TI PCI-1031
TI PCI-1130
TI PCI-1131
TI PCI-1210
TI PCI-1211
TI PCI-1220
TI PCI-1221
TI PCI-1225
TI PCI-1250
TI PCI-1251
TI PCI-1251B
TI PCI-1260
TI PCI-1260B
TI PCI-1410
TI PCI-1420
TI PCI-1450
TI PCI-1451
TI PCI-1510
TI PCI-1515
TI PCI-1520
TI PCI-1530
TI PCI-1620
TI PCI-4410
TI PCI-4450
TI PCI-4451
TI PCI-4510
TI PCI-4520
TI PCI-[67]x[12]1
TI PCI-[67]x20
ENE CB710
ENE CB720
ENE CB1211
ENE CB1255
ENE CB1410
ENE CB1420
Toshiba ToPIC95
Toshiba ToPIC95B
Toshiba ToPIC97
Toshiba ToPIC100
TUNABLES
The driver supports the following tunable parameters, which may be added to /boot/loader.conf or set via the sysctl(8) command:
hw.cbb.debug Non-zero values cause more verbose information to be printed to aid in debugging problems with the bridge chipset.
SEE ALSO cardbus(4), pccard(4), exca(4)BSD July 21, 2004 BSD