12-29-2011
Thanx jegaraman,
I am communicating the same thing to customer to bring the temp of the room below 22 degree. But they suspect to change the heat sink of the processor ? Is this a solution ?? I don't think so.
In that DC they are having some SF 280R servers also. But their concern is why the temp of the SF v440 server is increasing why not with 280 servers.
Is the amount of heat generated by a SF v440 server is same as SF280R server ?????
regards
Sudhansu
10 More Discussions You Might Find Interesting
1. Solaris
Got an curious issue.
I applied 109147-39 to, oh 15 or so various systems all running Jumpstarted Solaris 8. When I hit the first two V440s, they both failed with Return code 139. All non shell commands segfaulted from then on.
The patch modified mainly the linker libraries and commands.
... (2 Replies)
Discussion started by: BOFH
2 Replies
2. Solaris
Hello,
I hope you can help me. I am new to Sun servers and we have a Sun Fire v440 server in which one power supply failed, we are waiting for new one. But now our server is shutting down constantly. Is there any setting with which we can prevent this behaviour? (1 Reply)
Discussion started by: Tibor
1 Replies
3. Solaris
Dear All,
I am facing a specfic problem with my New SunFire T2000.Recently we bought new sunfire T2000 sparc server.When i am trying to install solaris 10 through cdrom , I get error messgae
Error:Last Trap: Instaruction Access Exception
{0} ok boot cdrom
Boot device:... (6 Replies)
Discussion started by: solaris8in
6 Replies
4. Solaris
First of all it's shut down 60 second after power on and write on console :
SC Alert: Correct SCC not replaced - shutting managed system down!
This is cured by moving out battery from ALOM card.
Now server start to loop during the testing.
That's on the console:
>@(#) Sun Fire V440,Netra... (14 Replies)
Discussion started by: Alisher
14 Replies
5. Solaris
Hello,
I am seeing error messages in V440 (OS = solaris 8). I have copied here :
The system does not reboot constantly and it is up for last 67 days. One more interesting thing I found, I see errors start appearing at 4:52AM last until 6am and again start at 16:52am on same day..
I... (5 Replies)
Discussion started by: upengan78
5 Replies
6. Solaris
Hi,
I was asked to connect a KVM screen to a Sun Fire V440 last night so I connected it up but no joy and nothing on the KVM screen. I was told that a reboot may fix the problem so connected to the ALOM and rebooted. On the plus side, the KVM screen now works but I lost the ALOM connection.
... (0 Replies)
Discussion started by: jimmy54321
0 Replies
7. Solaris
Hi:
I bougth an used Sun Fire v440, and It have a firmware password. When I turn on the server, it ask for firmware password. (I don 't know what is the correct password). I can access to SC, but when I want to access to OBP, Firmware Password appears again. I remove the battery for two hours,... (1 Reply)
Discussion started by: mguazzardo
1 Replies
8. Solaris
Hi,
I have Sun Fire V440. Boot disks are mirrored. system crashed and it's not coming up. Error message is
Insufficient metadevice database replicas located. Use Metadb to delete databases which are broken.
Boot disks are mirrored and other disks are ZFS configuration. Please... (2 Replies)
Discussion started by: samnyc
2 Replies
9. Solaris
Hi,
I have a SUN Fire V440 server running Solaris 8. One of the 4 disks do not appear when issued the format command. The "ready to remove" LED is not on either.
Metastat command warns that this disk "Needs maintenace". Can I just shutdown and power off the machine and then insert an... (5 Replies)
Discussion started by: Echo68
5 Replies
10. Solaris
Hi,
I have a Sun Fire V440 server that fails to boot up correctly. A lot of services are not started and the sytems acts really slow to commands. During boot I can see the following Error:
WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
SCSI transport failed: reason 'reset': retrying... (15 Replies)
Discussion started by: oliwei
15 Replies
sckmd(1M) System Administration Commands sckmd(1M)
NAME
sckmd - Sun Fire High-End system key management daemon
SYNOPSIS
/usr/platform/SUNW,Sun-Fire-15000/lib/sckmd
DESCRIPTION
sckmd is a server process that resides on a Sun Fire high-end system domain. sckmd maintains the Internet Protocol Security (IPsec) Secu-
rity Associations (SAs) needed to secure the communication between the Sun Fire 15K System Controller (SC) and the cvcd(1M) and dcs(1M)
daemons running on a Sun Fire 15K domain. See ipsec(7P) for a description of Security Associations.
sckmd receives SAs from the SC and provides these SAs to the Security Association Databases (SADBs) using pf_key(7P).
sckmd normally starts up at system boot time. Each domain supports only one running sckmd process at a time.
FILES
/etc/inet/ipsecinit.conf Configuration file for default system-wide IPsec policies
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+------------------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+------------------------------------+
|Architecture |Sun Fire High-End systems |
+-----------------------------+------------------------------------+
|Availability |SUNWsckmx.u, SUNWsckmu.u, SUNWsckmr |
+-----------------------------+------------------------------------+
SEE ALSO
cvcd(1M), dcs(1M), ipsecconf(1M), ipsecalgs(1M), attributes(5), ipsec(7P), ipsecah(7P), ipsecesp(7P), pf_key(7P)
Sun Enterprise 10000 SSP Reference Manual
System Management Services (SMS) Reference Manual
NOTES
IPsec is used by Sun Fire high-end systems such as a Sun Fire 15K, to secure the communication between the SC, and the cvcd(1M) and dcs(1M)
daemons running on a domain. System-wide IPsec policies for these daemons are configured on a domain with ipsecconf(1M). Default policies
are defined when the SUNWsckmr package is installed on a Sun Fire high-end system domain at OS install time.
Package SUNWsckmr configures default system-wide policies for cvcd(1M) and dcs(1M) by adding the following entries in
/etc/inet/ipsecinit.conf:
{ dport sun-dr ulp tcp } permit
{ auth_alg md5 }
{ sport sun-dr ulp tcp } apply
{ auth_alg md5 sa unique }
{ dport cvc_hostd ulp tcp } permit
{ auth_alg md5 }
{ sport cvc_hostd ulp tcp } apply
{ auth_alg md5 sa unique }
The cvc_hostd service represents cvcd(1M) and the sun-dr service represents dcs(1M) in the preceding entries.
These policies conform to the format defined by ipsec(7P) and require and require IPsec AH protection using the HMAC-MD5 algorithm. See
ipsecah(7P).
System-wide policies for cvcd(1M) and dcs(1M) configured on a domain using ipsecconf(1M) must match the IPsec policies defined for these
services on the SC. On an SC, IPsec policies for these services are defined by the SMS key management daemon. Refer to thekmd(1M) man page
in the System Management Services (SMS) Reference Manual.
IPsec encryption or authentication with encryption can be enabled on the domain using the encr_algs and encr_auth_algs properties, as
described in the ipsecconf(1M) manual page. For example, the following ipsecconf(1M) entries require IPsec ESP protection using the Triple-
DES encryption algorithm and the HMAC-MD5 authentication algorithm.
{ dport cvc_hostd ulp tcp } permit
{ encr_algs 3des encr_auth_algs md5 }
{ sport cvc_hostd ulp tcp } apply
{ encr_algs 3des encr_auth_algs md5 sa unique }
See ipsecesp(7P) for more information on the IPsec ESP protocol. You can obtain a list of authentication and encryption algorithms and
their properties by using the ipsecalgs(1M) command.
SunOS 5.10 23 Oct 2003 sckmd(1M)